https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Plug-in surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2,
L3, N, PE), with remote indication contact.
Your advantages
Plugs can be checked with CHECKMASTER
With or without floating remote indication contact
High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations
Optical, mechanical status indication for the individual arresters
Type 2 consistent plug-in surge arresters
Mechanical coding of all slots
Modular arrester blocks with ultra-narrow design
Use of varistors with a low leakage current
Disconnect device on each individual plug
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4017918977610
Weight per Piece (excluding packing)
415.500 g
Custom tariff number
85363030
Country of origin
Germany
Technical data
Dimensions
09/05/2019 Page 1 / 11
https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Technical data
Dimensions
Height
98 mm
Width
49.2 mm
Depth
71.5 mm
Horizontal pitch
2.7 Div.
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-40 °C ... 80 °C
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Altitude
≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)
5 % ... 95 %
Shock (operation)
30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)
5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
General
IEC test classification
II
T2
EN type
T2
IEC power supply system
TN-S
TT
Mode of protection
L-N
L-PE
N-PE
Mounting type
DIN rail: 35 mm
Color
gray/blue
black
Housing material
PBT-FR
Degree of pollution
2
Flammability rating according to UL 94
V-0
Type
DIN rail module, two-section, divisible
Number of positions
4
Surge protection fault message
Optical, remote indicator contact
Protective circuit
Nominal voltage UN
240/415 V AC (TN-S)
240/415 V AC (TT)
Nominal frequency fN
50 Hz (60 Hz)
Maximum continuous operating voltage UC (L-N)
350 V AC
Maximum continuous operating voltage UC (L-PE)
350 V AC
09/05/2019 Page 2 / 11
https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Technical data
Protective circuit
Maximum continuous voltage UC (N-PE)
264 V AC
Rated load current IL
40 A (Biconnect M4 fork-type cable lug 6 mm²)
63 A (TWIN ferrule 2 x 10 mm²)
Residual current IPE
≤ 1 µA
Nominal discharge current In (8/20) µs (L-N)
20 kA
Nominal discharge current In (8/20) µs (N-PE)
20 kA
Maximum discharge current Imax (8/20) µs (L-N)
40 kA
Maximum discharge current Imax (8/20) µs (N-PE)
40 kA
Follow current interrupt rating Ifi (N-PE)
100 A (264 V AC)
Short-circuit current rating ISCCR
25 kA
Voltage protection level Up (L-N)
≤ 1.5 kV
Voltage protection level Up (L-PE)
≤ 1.9 kV
Voltage protection level Up (N-PE)
≤ 1.5 kV
Residual voltage Ures (L-N)
≤ 1.5 kV (at In)
≤ 1.3 kV (at 10 kA)
≤ 1.2 kV (at 5 kA)
≤ 1.1 kV (at 4 kA)
≤ 1 kV (at 2 kA)
Residual voltage Ures (N-PE)
≤ 0.5 kV (at In)
≤ 0.5 kV (at 10 kA)
≤ 0.5 kV (at 5 kA)
≤ 0.5 kV (at 4 kA)
≤ 0.5 kV (at 2 kA)
TOV behavior at UT (L-N)
415 V AC (5 s / withstand mode)
440 V AC (120 min / safe failure mode)
TOV behavior at UT (N-PE)
1200 V AC (200 ms / withstand mode)
Response time tA (L-N)
≤ 25 ns
Response time tA (N-PE)
≤ 100 ns
Max. backup fuse with V-type through wiring
40 A (gG / Biconnect M4 fork-type cable lug, 6 mm²)
63 A (gG / TWIN ferrule 2x 10mm²)
Max. backup fuse with branch wiring
315 A (gG)
Indicator/remote signaling
Switching function
PDT contact
Operating voltage
5 V AC ... 250 V AC
125 V DC (200 mA DC)
Operating current
5 mA AC ... 1 A AC
09/05/2019 Page 3 / 11
https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Technical data
Indicator/remote signaling
1 A DC (30 V DC)
Connection method
Pluggable screw connection
Screw thread
M2
Tightening torque
0.25 Nm
Stripping length
7 mm
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Conductor cross section AWG
28 ... 16
Connection data
Connection method
Screw connection
Screw thread
M5
Tightening torque
4.5 Nm
Stripping length
16 mm
Conductor cross section flexible
2.5 mm² ... 16 mm²
Conductor cross section solid
2.5 mm² ... 25 mm²
Conductor cross section AWG
12 ... 4
UL specifications
SPD Type
4CA
Maximum continuous operating voltage MCOV (L-L)
700 V AC
Maximum continuous operating voltage MCOV (L-N)
350 V AC
Maximum continuous operating voltage MCOV (L-G)
350 V AC
Maximum continuous operating voltage MCOV (N-G)
264 V AC
Nom. voltage
240/415 V AC
Mode of protection
L-L
L-N
L-G
N-G
Power distribution system
Wye
Nominal frequency
50/60 Hz
Measured limiting voltage MLV (L-L)
3280 V
Measured limiting voltage MLV (L-N)
2000 V
Measured limiting voltage MLV (L-G)
2080 V
Measured limiting voltage MLV (N-G)
950 V
Nominal discharge current In (L-L)
20 kA
Nominal discharge current In (L-N)
20 kA
Nominal discharge current In (L-G)
20 kA
09/05/2019 Page 4 / 11
https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Technical data
UL specifications
Nominal discharge current In (N-G)
20 kA
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Dimensional drawing
09/05/2019 Page 5 / 11
https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Circuit diagram
09/05/2019 Page 6 / 11
https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Application drawing
09/05/2019 Page 7 / 11
https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Application drawing
Classifications
eCl@ss
eCl@ss 4.0
27140201
eCl@ss 4.1
27130801
eCl@ss 5.0
27130801
eCl@ss 5.1
27130800
eCl@ss 6.0
27130800
09/05/2019 Page 8 / 11
https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Classifications
eCl@ss
eCl@ss 7.0
27130805
eCl@ss 8.0
27130805
eCl@ss 9.0
27130805
ETIM
ETIM 2.0
EC000941
ETIM 3.0
EC000941
ETIM 4.0
EC000941
ETIM 5.0
EC000941
ETIM 6.0
EC000941
UNSPSC
UNSPSC 6.01
30212010
UNSPSC 7.0901
39121610
UNSPSC 11
39121610
UNSPSC 12.01
39121610
UNSPSC 13.2
39121620
Accessories
Accessories
Bridge
Wiring bridge - MPB SET VAL-CP-3S - 2880684
Wiring bridge set, consisting of three flexible bridges 15 cm black, 1 bridge 27 cm blue.
Device marking
Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm
09/05/2019 Page 9 / 11
https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Accessories
Feed-through terminal block
Feed-through terminal block - DK-BIC-35 - 2749880
Feed-through terminal block for VAL and FLT applications
Labeled device marker
Marker for terminal blocks - ZBN 18,LGS:ERDE - 2749589
Marker for terminal blocks, Strip, white, labeled, Horizontal: Grounding symbol, mounting type: snap into tall marker
groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm
Marker for terminal blocks - ZBN 18,LGS:L1-N,ERDE - 2749576
Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker
groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm
Marker pen
Marker pen - B-STIFT - 1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Spare parts
09/05/2019 Page 10 / 11
https://www.phoenixcontact.com/us/products/2859521
Type 2 surge arrester - VAL-CP-3S-350 - 2859521
Accessories
Type 2 surge protection plug - VAL-CP-350-ST - 2859602
Replacement plug for VAL-CP surge protective device with high-capacity varistor with a low leakage current.
Type 2 surge protection plug - VAL-CP-N/PE-350-ST - 2859699
Replacement plug for VAL-CP surge arrester with N-PE spark gap.
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
09/05/2019 Page 11 / 11
