2859628

Extract from the online catalog     VAL-CP-175-ST Order No.: 2859628 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859628   Type 2 arrester replacement plug (surge arrester) with high-capacity varistor with low leakage current.   Product notes WEEE/RoHS-compliant since: 12/17/2007 Commercial data GTIN (EAN) 4 046356 045506 Note Made-to-order sales group J020 Pack 10 pcs. Customs tariff 85369010 Catalog page information Page 26 (TT-2009) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data Standards Housing material PBT Inflammability class acc. to UL 94 V0 Color gray PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 4 Feb 25, 2011 VAL-CP-175-ST Order No.: 2859628 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859628 Standards for air and creepage distances DIN VDE 0110-1 IEC 60664-1: 1992-10 IEC 61643-11 UL 1449 IEEE C62.1 IEEE C62.45 IEC 61643-1 Surge voltage category III Pollution degree 2 Degree of protection IP20 Mounting type On base element Design DIN rail module, two-section, divisible Number of positions 1 Ambient temperature (operation) -40 °C ... 80 °C Message: Surge protection fault Optical Direction of action L-N / L-PEN Protective circuit IEC category II T2 EN type T2 Nominal voltage UN 120 V AC Arrester rated voltage UC 175 V AC UT (TOV-proof) 240 V AC (5 sec.) Nominal frequency fN 50 Hz 60 Hz Ground conductor current IPE ≤ 300 µA Standby power consumption PC ≤ 17.5 mW Max. discharge surge current Imax (8/20) µs 40 kA Nominal discharge surge current In (8/20) µs 20 kA Protection level Up ≤ 850 V (at In) Residual voltage ≤ 700 V (at 10 kA) ≤ 600 V (at 5 kA) ≤ 550 V (at 3 kA) ≤ 850 V SVR clamp voltage PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de ≤ 500 V (UL 1449) Page 2 / 4 Feb 25, 2011 VAL-CP-175-ST Order No.: 2859628 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859628 Response time ≤ 25 ns Max. required backup fuse with branch wiring 125 A (gL/gG) Short-circuit resistance IP with max. backup fuse (effective) 25 kA Connection, protective circuit Connection type IN FLASHTRAB/VALVETRAB plug-in system Connection type OUT FLASHTRAB/VALVETRAB plug-in system Standards Standards/regulations IEC 61643-1 1998 DIN EN 61643-11 2002 UL 1449 IEEE C62.1 / C62.34 / C62.45 Certificates / Approvals Certification CB, CUL, GL, GOST, KEMA, UL Accessories Item Designation Description 0811228 X-PEN 0,35 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm 0809735 ZBF 12:UNBEDRUCKT Zack strip, flat, unprinted, 5-section, divisible, for labeling by the customer 0803595 ZBFM 5/WH:UNBEDRUCKT Zack marker sheet, flat, unprinted: 120-section, 10 strips à 12 markers, sufficient for 120 terminal blocks, for all terminal blocks, pitch 5.2 mm, labeling with M-PEN or CMS system, color: white Marking PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 3 / 4 Feb 25, 2011 VAL-CP-175-ST Order No.: 2859628 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2859628 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de © 2011 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 4 Feb 25, 2011