2859767

https://www.phoenixcontact.com/us/products/2859767 Lightning/surge arrester combination type 1+2 - FLT-CP-2S-350 - 2859767 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pluggable lightning current and surge arrester combination, in acc. with typ 1+2 / Class I+II / B+C arresters. Arresters coordinated following the AEC principle, for 2-phase power supply networks with separately installed PE and N (L1, L2, PE, N). Product Features ■ ■ ■ ■ ■ Plugs can be checked with CHECKMASTER High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations With floating remote indication contact Thermal disconnect device for each individual plug Optical, mechanical status indication for the individual arresters Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 1185.92 g Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 95 mm Width 106.8 mm Depth 71.5 mm Horizontal pitch 6 Div. Ambient conditions Degree of protection IP20 (only when all terminal points are used) Ambient temperature (operation) -40 °C ... 80 °C 03/13/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2859767 Lightning/surge arrester combination type 1+2 - FLT-CP-2S-350 - 2859767 Technical data Ambient conditions Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 25g (half sinus / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 5g (5 - 500 Hz/2.5 h/X, Y, Z) General Standards/specifications IEC 61643-11 2011 EN 61643-11 2012 IEC test classification I + II T1 + T2 EN type T1 + T2 IEC power supply system TN-S TT Number of ports One SPD design Combination type Mode of protection L-N L-PE N-PE Mounting type DIN rail: 35 mm Color gray/blue black Housing material PBT Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Number of positions 3 Arrester can be tested with CHECKMASTER from software version: From SW rev. 3.00 Surge protection fault message Optical, remote indicator contact Protective circuit Nominal voltage UN 240/415 V AC (TN-S) 240/415 V AC (TT) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous operating voltage UC (L-N) 350 V AC Maximum continuous voltage UC (N-PE) 350 V AC Rated load current IL 125 A (< 55 °C) Residual current IPE ≤ 0.01 mA 03/13/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/2859767 Lightning/surge arrester combination type 1+2 - FLT-CP-2S-350 - 2859767 Technical data Protective circuit Nominal discharge current In (8/20) µs (L-N) 25 kA Nominal discharge current In (8/20) µs (L-PE) 25 kA Nominal discharge current In (8/20) µs (N-PE) 100 kA Impulse discharge current (10/350) µs (L-N), charge 12.5 As Impulse discharge current (10/350) µs (L-N), specific energy 160 kJ/Ω Impulse discharge current (10/350) µs (L-N), peak current value Iimp 25 kA Impulse discharge current (10/350) µs (L-PE), charge 12.5 As Impulse discharge current (10/350) µs (L-PE), specific energy 160 kJ/Ω Impulse discharge current (10/350) µs (L-PE), peak current value Iimp 25 kA Impulse discharge current (10/350) µs (N-PE), charge 50 As Impulse discharge current (10/350) µs (N-PE), specific energy 2500 kJ/Ω Impulse discharge current (10/350) µs (N-PE), peak current value Iimp 100 kA Follow current interrupt rating Ifi (L-N) 25 kA (264 V AC) 3 kA (350 V AC) Follow current interrupt rating Ifi (N-PE) 100 A (350 V AC) Short-circuit current rating ISCCR 25 kA (264 V AC) 3 kA (350 V AC) Voltage protection level Up (L-N) ≤ 1.5 kV Voltage protection level Up (L-PE) ≤ 2.2 kV Voltage protection level Up (N-PE) ≤ 1.5 kV Residual voltage Ures (L-N) ≤ 1.5 kV (at In) ≤ 1.2 kV (at 10 kA) ≤ 1 kV (at 5 kA) ≤ 0.9 kV (at 3 kA) Residual voltage Ures (L-PE) ≤ 2.2 kV (at In) ≤ 2 kV (at 10 kA) ≤ 1.8 kV (at 5 kA) ≤ 1.6 kV (at 3 kA) Residual voltage Ures (N-PE) ≤ 1.5 kV (at In) ≤ 1 kV (at 10 kA) ≤ 0.9 kV (at 5 kA) ≤ 0.8 kV (at 3 kA) Front of wave sparkover voltage at 6 kV (1.2/50) µs (L-N) ≤ 1.5 kV Front of wave sparkover voltage at 6 kV (1.2/50) µs (L-PE) ≤ 2.2 kV Front of wave sparkover voltage at 6 kV (1.2/50) µs (N-PE) ≤ 1.5 kV TOV behavior at UT (L-N) 415 V AC (5 s / withstand mode) 03/13/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2859767 Lightning/surge arrester combination type 1+2 - FLT-CP-2S-350 - 2859767 Technical data Protective circuit 457 V AC (120 min / safe failure mode) TOV behavior at UT (N-PE) 1200 V AC (200 ms / withstand mode) Response time tA (L-N) ≤ 25 ns Response time tA (N-PE) ≤ 100 ns Max. backup fuse with branch wiring 315 A (gG) Max. backup fuse with V-type through wiring 125 A (gG) Indicator/remote signaling Connection name Remote fault indicator contact Switching function PDT contact Operating voltage 12 V AC ... 250 V AC 125 V DC (200 mA DC) Operating current 10 mA AC ... 1 A 1 A (30 V DC) Connection method Plug-in/screw connection via COMBICON Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section AWG 28 ... 16 Connection data Connection method Screw terminal blocks Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 25 mm² Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 35 mm² Conductor cross section AWG 13 ... 2 Screw thread M5 Tightening torque 4.5 Nm Stripping length 18 mm UL specifications SPD Type 4CA Maximum continuous operating voltage MCOV (L-L) 528 V AC Maximum continuous operating voltage MCOV (L-N) 264 V AC 03/13/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2859767 Lightning/surge arrester combination type 1+2 - FLT-CP-2S-350 - 2859767 Technical data UL specifications Maximum continuous operating voltage MCOV (L-G) 528 V AC Maximum continuous operating voltage MCOV (N-G) 264 V AC Nom. voltage 240/415 V AC Mode of protection L-L L-N L-G N-G Power distribution system 3Y Nominal frequency 50/60 Hz Measured limiting voltage MLV (L-L) 2470 V Measured limiting voltage MLV (L-N) 1340 V Measured limiting voltage MLV (L-G) 1550 V Measured limiting voltage MLV (N-G) 1080 V Nominal discharge current In (L-L) 20 kA Nominal discharge current In (L-N) 20 kA Nominal discharge current In (L-G) 20 kA Nominal discharge current In (N-G) 20 kA Follow current (L-N) 10 kA (264 V AC) Follow current (N-G) 200 A (264 V AC) Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130808 eCl@ss 7.0 27130808 eCl@ss 8.0 27130808 ETIM ETIM 2.0 EC001457 ETIM 3.0 EC001457 ETIM 4.0 EC001457 ETIM 5.0 EC001457 03/13/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2859767 Lightning/surge arrester combination type 1+2 - FLT-CP-2S-350 - 2859767 Classifications UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Recognized / KEMA-KEUR / cUL Recognized / CCA / IECEE CB Scheme / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  KEMA-KEUR  cUL Recognized  CCA  03/13/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2859767 Lightning/surge arrester combination type 1+2 - FLT-CP-2S-350 - 2859767 Approvals IECEE CB Scheme  EAC  EAC  cULus Recognized  Drawings Dimensional drawing 106,8 12 N 14 11 FM 64 71,5 95 Circuit diagram PE L1 L2 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/13/2016   Page 7 / 7