2861205

IB IL MUX-CAB PSI Adapter cable to connect the Inline field multiplexer to PSI MOS interface modules 5981A043 Data sheet 7841_en_00 co © PHOENIX CONTACT - 11/2008 on l in ec om po ne The completely assembled adapter cable was designed for applications in which you set up a field multiplexer system with optical fibers. In this case, you may connect the field multiplexer and the fiber-optic converter using the adapter cable without any additional wiring. s. Description nt 1 m AUTOMATION Make sure you always use the latest documentation. It can be downloaded at www.phoenixcontact.com. IB IL MUX-CAB PSI 2 Ordering data Products Description Type Order No. Pcs./Pkt. IB IL MUX-CAB PSI 2878476 1 Documentation Description Type Order No. Pcs./Pkt. "Automation terminals of the Inline product range" user manual IL SYS INST UM E 2698737 1 "Configuring and installing the Inline field multiplexer" user manual IB IL MUX UM E – – Terminal point assignment nt s. co 3 m Adapter cable to connect the Inline field multiplexer to PSI MOS interface modules 5981A043 Terminal point assignment of the Inline connector to connect an Inline field multiplexer 1 Terminal point 1.1 2.1 1.2 2.2 1.3 2.3 1.4, 2.4 7841_en_00 1.2 2 1.3 3 1.4 4 1 2 2.2 3 2.3 4 2.4 on l Figure 2 1 2.1 in ec 1.1 2 om po 3.1 Assembled adapter cable ne Figure 1 3.2 Terminal point assignment of the COMBICON connector to connect a PSI-MOS interface module 8 7 Figure 3 Terminal point 5 6 7 8 7841A002 Inline connector Signal Assignment Color Bridge Bridge Data /Data GND – Shield Jumper to 2.1 Jumper to 1.1 Data positive Data negative Ground Not used Shield Brown Brown Yellow Green Gray – – 6 5 7841A003 COMBICON connector Signal Assignment Color Shield GND D(B) D(A) Shield Ground Data positive Data negative – Gray Yellow Green PHOENIX CONTACT 2 IB IL MUX-CAB PSI 4 Application examples A detailed description of the application examples can be found in the IB IL MUX UM E user manual. Inline field multiplexer station with a fiber optic path A CONVERTER CONVERTER RS-485 RS-485 D(B) D(A) GND SHD DATA DATA GNDDATA SHD D(B) D(A) GND SHD FO FO nt Basic circuit diagram: Transmission over fiber optics IB IL 24 MUX MA-PAC A IB IL MUX-CAB PSI adapter cable 4.2 SHD 5981B031 CONVERTER Fiber optic converter: PSI-MOS-RS485W2/FO... FO Fiber optic connection po MUX ne Key: DATA DATA GNDDATA s. FO Figure 4 MUX 2 A m MUX 1 co 4.1 Inline field multiplexer station with a Bluetooth path om NOTE: Malfunction MUX 1 A in ec If you are using the IB IL MUX-CAB PSI adapter cable: Swap the yellow and green wires at terminal points 16 and 17 of the Bluetooth converter and remove the jumper (brown) from terminal 1.1 to 2.1. of the field multiplexer connector. CONVERTER RS-485 SHD D(B) D(A) GND SHD on l DATA DATA GNDDATA CONVERTER A MUX 2 RS-485 Bluetooth D(B) D(A) GND SHD BT DATA DATA GNDDATA SHD BT 5981B037 Figure 5 Basic circuit diagram: Transmission over Bluetooth Key: MUX IB IL 24 MUX MA-PAC CONVERTER Bluetooth converter: PSI-WL-RS232-RS485/BT A Adapter cable (modified IB IL MUX-CAB PSI cable) BT Bluetooth connection 7841_en_00 PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany • Phone: +49-(0) 5235-3-00 PHOENIX CONTACT • P.O.Box 4100 • Harrisburg • PA 17111-0100 • USA • Phone: +717-944-1300 www.phoenixcontact.com 3