2861247

https://www.phoenixcontact.com/us/products/2861247 Inline terminal - IB IL 24 DI 8-PAC - 2861247 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline, Digital input, Digital inputs: 8, 24 V DC, 4-wire, Transmission speed in the local bus 500 kBit/s, Degree of protection IP20, including Inline connectors and marking fields Product Description The digital Inline input terminals are designed for the connection of digital signals as are supplied from control switches, limit switches or proximity switches. All the typical applications are covered by the standard automation terminals. The I/O equipment is connected by a simple or an extended Inline connector, depending on the number of channels. The multi-wire connection method is available in both cases. The Inline terminals can be labeled using hinged labeling fields. The fields have insert cards that can be labeled individually to suit the application. Additionally, there is the proven ZBFM-6... Zack strip for labeling the terminal points. Product Features ■ ■ ■ ■ ■ 8 digital inputs Connection of sensors in 2, 3, and 4-wire technology Maximum permissible load current per sensor: 250 mA Maximum permissible load current from the terminal: 2 A Diagnostic and status indicators Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 201.8 g Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions 05/05/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2861247 Inline terminal - IB IL 24 DI 8-PAC - 2861247 Technical data Dimensions Width 48.8 mm Height 119.8 mm Depth 71.5 mm Note on dimensions Housing dimensions Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Mounting type DIN rail Net weight 118 g Note on weight specifications Without plug Diagnostics messages Short-circuit / overload of the digital outputs Error message in diagnostics code (bus) and display by means of the LED on the motor Interfaces Fieldbus system Lokalbus Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s Power supply for module electronics Supply voltage 24 V DC (via voltage jumper) Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Supply current 50 mA Communications power UL 7.5 V (via voltage jumper) Current consumption max. 50 mA (from the local bus) Inline potentials Communications power UL 7.5 V DC (via voltage jumper) Current consumption from UL max. 50 mA Main circuit supply UM 24 V DC Current consumption from UM max. 8 A DC Segment circuit supply US 24 V DC (nominal value) 05/05/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2861247 Inline terminal - IB IL 24 DI 8-PAC - 2861247 Technical data Inline potentials Current consumption from US max. 2 A Digital inputs Input name Digital inputs Description of the input EN 61131-2 type 1 Connection method Spring-cage connection 4-wire Number of inputs 8 Typical response time < 1 ms Protective circuit Short-circuit and overload protection Input voltage 24 V DC (via voltage jumper) Input voltage range "0" signal -3 V DC ... 5 V DC Input voltage range "1" signal 15 V DC ... 30 V DC Standards and Regulations Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Connection in acc. with standard CUL Protection class III, IEC 61140, EN 61140, VDE 0140-1 Classifications eCl@ss eCl@ss 4.0 27250302 eCl@ss 4.1 27250302 eCl@ss 5.0 27250302 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 eCl@ss 9.0 27242604 ETIM ETIM 2.0 EC001430 ETIM 3.0 EC001599 05/05/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2861247 Inline terminal - IB IL 24 DI 8-PAC - 2861247 Classifications ETIM ETIM 4.0 EC001599 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Recognized / cUL Recognized / LR / BV / ABS / RINA / BSH / EAC / cULus Recognized Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Recognized  cUL Recognized  LR  BV  05/05/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2861247 Inline terminal - IB IL 24 DI 8-PAC - 2861247 Approvals ABS  RINA  BSH  EAC  cULus Recognized  Drawings Connection diagram Dimensional drawing 140,5 1.1 2.1 3.1 4.1 5.1 6.1 7.1 8.1 4.2 5.2 6.2 7.2 8.2 3.3 4.3 5.3 6.3 7.3 8.3 1.4 2.4 3.4 4.4 5.4 6.4 7.4 8.4 71,5 3.2 2.3 IN 8 2.2 1.3 +24 V 1.2 +24 V IN 1 119,8 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/05/2016   Page 5 / 5