2861302

https://www.phoenixcontact.com/us/products/2861302 Inline terminal - IB IL AI 2/SF-PAC - 2861302 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline, Analog input terminal, Analog inputs: 2, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, -20 mA ... 20 mA, connection method: 2-wire, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field Product Description The terminal is designed for use within an Inline station. It is used to acquire analog voltage and current signals. Your advantages  2 analog single-ended signal inputs for the connection of either voltage or current signals  Connection of sensors in 2-wire technology  Current ranges: 0 mA ... 20 mA, 4 mA ... 20 mA, ±20 mA  Voltage ranges: 0 V ... 10 V, ±10 V  Channels are parameterized independently of one another via the bus system  Measured values can be represented in four different formats  Resolution depends on the representation format and the measuring range  Process data update of both channels within a max. of 1.5 ms Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918894245 Weight per Piece (excluding packing) 100.000 g Custom tariff number 85389091 Country of origin Germany 09/10/2019   Page 1 / 8 https://www.phoenixcontact.com/us/products/2861302 Inline terminal - IB IL AI 2/SF-PAC - 2861302 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.2 mm Height 136.8 mm Depth 71.5 mm Note on dimensions Housing dimensions Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) 80 kPa ... 106 kPa (up to 3000 m above sea level, in ATEX Zone 2) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Mounting type DIN rail Net weight 10.18 g Note on weight specifications with connector Operating mode Process data operation with 2 words Diagnostics messages Failure of the internal I/O supply Yes Peripheral fault Error message in the process data User error Error message in the process data Interfaces Designation Inline local bus No. of channels 2 Connection method Inline data jumper Transmission speed 500 kbps Inline potentials Designation Communications power (UL) Supply voltage 7.5 V DC (via voltage jumper) Current consumption typ. 45 mA max. 60 mA Designation Supply of analog modules (UANA) 09/10/2019   Page 2 / 8 https://www.phoenixcontact.com/us/products/2861302 Inline terminal - IB IL AI 2/SF-PAC - 2861302 Technical data Inline potentials Supply voltage 24 V DC (via voltage jumper) Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Current consumption typ. 13 mA max. 18 mA Power consumption typ. 662 mW Analog inputs Description of the input Single-ended inputs, voltage or current Input name Analog inputs Number of inputs 2 Connection method Inline shield connector Connection technology 2-wire Note regarding the connection technology shielded A/D conversion time typ. 120 µs (per channel) Limit frequency (3 dB) 40 Hz Type of protection Surge protection Data formats IB IL, IB ST, IB RT, standardized representation Measuring principle Successive approximation Measured value resolution 16 bits (15 bits + sign bit) Measured value representation 16 bit two's complement Current input signal 0 mA ... 20 mA 4 mA ... 20 mA -20 mA ... 20 mA Input resistance current input 50 Ω (Shunt) Voltage input signal 0 V ... 10 V -10 V ... 10 V Input resistance of voltage input > 220 kΩ Common mode voltage range signal - ground 40 V (between current input and functional earth ground) Electrical isolation Test section 7.5 V supply (bus logic), 24 V supply UANA / I/O 500 V AC 50 Hz 1 min. 7.5 V supply (bus logic), 24 V supply UANA/functional earth ground 500 V AC 50 Hz 1 min. I/O / functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Connection in acc. with standard CUL Protection class III, IEC 61140, EN 61140, VDE 0140-1 Environmental Product Compliance 09/10/2019   Page 3 / 8 https://www.phoenixcontact.com/us/products/2861302 Inline terminal - IB IL AI 2/SF-PAC - 2861302 Technical data Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Block diagram Connection diagram Internal wiring of the terminal points Connection example 09/10/2019   Page 4 / 8 https://www.phoenixcontact.com/us/products/2861302 Inline terminal - IB IL AI 2/SF-PAC - 2861302 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27250300 eCl@ss 4.1 27250300 eCl@ss 5.0 27250300 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 eCl@ss 9.0 27242601 ETIM ETIM 2.0 EC001431 ETIM 3.0 EC001596 ETIM 4.0 EC001596 ETIM 5.0 EC001596 ETIM 6.0 EC001596 ETIM 7.0 EC001596 09/10/2019   Page 5 / 8 https://www.phoenixcontact.com/us/products/2861302 Inline terminal - IB IL AI 2/SF-PAC - 2861302 Classifications UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 32151602 Approvals Approvals Approvals DNV GL / BSH / BV / LR / ABS / BSH / RINA / UL Recognized / EAC Ex Approvals UL Listed / cUL Listed / ATEX / cULus Listed Approval details DNV GL   BSH   https://approvalfinder.dnvgl.com/  TAA00000BN  http://www.bsh.de/de/index.jsp  Anwenderhinweis  20989/B2_BV BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials LR    http://www.lr.org/en  08/20033 ABS   http://www.eagle.org/eagleExternalPortalWEB/  17-HG1621871-PDA BSH   http://www.bsh.de/de/index.jsp  658 09/10/2019   Page 6 / 8 https://www.phoenixcontact.com/us/products/2861302 Inline terminal - IB IL AI 2/SF-PAC - 2861302 Approvals RINA    http://www.rina.org/en  ELE183315XG UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 140324 EAC      EAC-Zulassung Accessories Accessories Labeling panel Labeling field - IB IL FIELD 2 - 2727501 Labeling field, width: 12.2 mm     Plug Inline shield connector - IB IL SCN 6-SHIELD-TWIN - 2740245 Inline shield connector     Inline shield connector - IB IL SCN-6 SHIELD - 2726353 Inline shield connector     09/10/2019   Page 7 / 8 https://www.phoenixcontact.com/us/products/2861302 Inline terminal - IB IL AI 2/SF-PAC - 2861302 Accessories Terminal marking Insert strip - ESL 62X10 - 0809492 Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems: Laser printer, mounting type: insert, lettering field size: 62 x 10 mm, Number of individual labels: 72     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/10/2019   Page 8 / 8