2861328

https://www.phoenixcontact.com/us/products/2861328 Inline function terminal - IB IL TEMP 2 RTD-PAC - 2861328 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline analog input terminal, complete with accessories (connector plug and labeling field), 2 inputs, RTD (resistance temperature detector), 2-, 3-, 4-wire connection technology Product Description Using these analog input terminals, it is possible to measure signals from conventional thermocouples and resistance thermometers. The terminals are configured for connection to various types of sensors. The user can configure the different sensor characteristic curves himself via process data. It is thus possible to attain the best possible adaptations in very different applications. The Inline terminals can be labeled using hinged labeling fields. The fields have insert cards that can be labeled individually to suit the application. Additionally, there is the proven ZBFM-6... Zack strip for labeling the terminal points. Product Features ■ ■ ■ ■ Pt, Ni, Cu, KTY sensor types according to DIN and SAMA Measured value acquisition with 16-bit resolution Channel scout for optical channel identification Connection of sensors in 2, 3, and 4-wire technology Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 90.9 g Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.2 mm Height 136.8 mm Depth 71.5 mm 03/13/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2861328 Inline function terminal - IB IL TEMP 2 RTD-PAC - 2861328 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Mounting type DIN rail Net weight 67 g Note on weight specifications with connector Operating mode Process data operation with 2 words Interfaces Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s Transmission physics Copper Inline potentials Communications power UL 7.5 V DC (via voltage jumper) Current consumption from UL max. 60 mA typ. 43 mA I/O supply voltage UANA 24 V DC Current consumption from UANA max. 18 mA typ. 11 mA Power consumption typ. 587 mW max. 882 mW Analog inputs Number of inputs 2 Input name Analog RTD inputs Description of the input Input for resistive temperature sensors Connection method Spring-cage connection 2, 3, 4-wire (shielded) Sensor types (RTD) that can be used Pt, Ni, KTY, Cu sensors, linear resistors Linear resistance measuring range 0 Ω ... 400 Ω 0 Ω ... 4 kΩ 03/13/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2861328 Inline function terminal - IB IL TEMP 2 RTD-PAC - 2861328 Technical data Analog inputs Measuring principle Successive approximation Measured value representation 16 bits two's complement and other A/D conversion time typ. 120 µs (per channel) Resolution A/D 16 bit (15 bit + sign bit) Process data update 32 ms () Standards and Regulations Test section 7.5 V supply (bus logics)/24 V analog supply (analog I/O) 500 V AC 50 Hz 1 min. 7.5 V supply (bus logics) / functional earth ground 500 V AC 50 Hz 1 min. 24 V analog supply (analog I/O) / functional earth ground 500 V AC 50 Hz 1 min. Connection in acc. with standard CUL Protection class III, IEC 61140, EN 61140, VDE 0140-1 Classifications eCl@ss eCl@ss 4.0 27250303 eCl@ss 4.1 27250303 eCl@ss 5.0 27250303 eCl@ss 5.1 27242601 eCl@ss 6.0 27242601 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 ETIM ETIM 2.0 EC001431 ETIM 3.0 EC001596 ETIM 4.0 EC001596 ETIM 5.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 03/13/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2861328 Inline function terminal - IB IL TEMP 2 RTD-PAC - 2861328 Approvals Approvals Approvals UL Recognized / cUL Recognized / LR / BV / ABS / RINA / BSH / BSH / EAC / cULus Recognized Ex Approvals UL Listed / cUL Listed / ATEX / UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Recognized  cUL Recognized  LR  BV  ABS  RINA  BSH  BSH  EAC  03/13/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2861328 Inline function terminal - IB IL TEMP 2 RTD-PAC - 2861328 Approvals cULus Recognized  Drawings Connection diagram 1.1 Dimensional drawing 136,8 2.1 1.2 2.2 1.3 2.3 1.4 2.4 J J 71,5 119,8 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/13/2016   Page 5 / 5