https://www.phoenixcontact.com/us/products/2861483
Inline terminal - IB IL 24 DI 2-NPN-PAC - 2861483
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Inline digital input terminal block, complete with accessories (connector and labeling field), 2 inputs with negative
logic, 24 V DC, 2, 3, 4-wire connection method
Product Description
The digital Inline input terminals are designed for the connection of digital signals as are supplied from control switches, limit switches or proximity
switches.
All the typical applications are covered by the standard automation terminals.
The I/O equipment is connected by a simple or an extended Inline connector, depending on the number of channels. The multi-wire connection method
is available in both cases.
The Inline terminals can be labeled using hinged labeling fields. The fields have insert cards that can be labeled individually to suit the application.
Additionally, there is the proven ZBFM-6... Zack strip for labeling the terminal points.
Product Features
Connections for 2 digital sensors, npn-wired
Connection of sensors in 2, 3, and 4-wire technology
Maximum permissible load current per sensor: 250 mA
Diagnostic and status indicators
Key Commercial Data
Packing unit
1 pc
Weight per Piece (excluding packing)
74.1 g
Custom tariff number
85389091
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
12.2 mm
07/29/2015 Page 1 / 6
https://www.phoenixcontact.com/us/products/2861483
Inline terminal - IB IL 24 DI 2-NPN-PAC - 2861483
Technical data
Dimensions
Height
119.8 mm
Depth
71.5 mm
Note on dimensions
Housing dimensions
Ambient conditions
Ambient temperature (operation)
-25 °C ... 55 °C
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Permissible humidity (operation)
10 % ... 95 % (according to DIN EN 61131-2)
Permissible humidity (storage/transport)
10 % ... 95 % (according to DIN EN 61131-2)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection
IP20
General
Net weight
59.79 g
Note on weight specifications
with connector
Mounting type
DIN rail
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Test section
5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz
1 min
5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz
1 min
7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min
24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min
Interfaces
Fieldbus system
Lokalbus
Designation
Inline local bus
Connection method
Inline data jumper
Transmission speed
500 kBit/s
Power supply for module electronics
Supply voltage
24 V DC (via voltage jumper)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Supply current
35 mA
Communications power UL
7.5 V (via voltage jumper)
Current consumption
max. 35 mA (from the local bus)
Inline potentials
Communications power UL
7.5 V DC (via voltage jumper)
Current consumption from UL
max. 35 mA
07/29/2015 Page 2 / 6
https://www.phoenixcontact.com/us/products/2861483
Inline terminal - IB IL 24 DI 2-NPN-PAC - 2861483
Technical data
Inline potentials
Main circuit supply UM
24 V DC
Current consumption from UM
max. 8 A DC
Segment supply voltage US
24 V DC (nominal value)
Current consumption from US
max. 0.5 A
Digital inputs
Input name
Digital inputs
Connection method
Spring-cage connection
2, 3, 4-wire
Number of inputs
2 (EN 61131-2 type 1)
Typical response time
< 1 ms
Protective circuit
Short-circuit and overload protection
Input voltage
24 V DC (via voltage jumper)
Input voltage range "0" signal
-3 V DC ... 5 V DC
Input voltage range "1" signal
15 V DC ... 30 V DC
Classifications
eCl@ss
eCl@ss 4.0
27250302
eCl@ss 4.1
27250302
eCl@ss 5.0
27250302
eCl@ss 5.1
27242604
eCl@ss 6.0
27242604
eCl@ss 7.0
27242604
eCl@ss 8.0
27242604
ETIM
ETIM 2.0
EC001430
ETIM 3.0
EC001599
ETIM 4.0
EC001599
ETIM 5.0
EC001599
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
UNSPSC 11
43172015
UNSPSC 12.01
43201404
07/29/2015 Page 3 / 6
https://www.phoenixcontact.com/us/products/2861483
Inline terminal - IB IL 24 DI 2-NPN-PAC - 2861483
Classifications
UNSPSC
UNSPSC 13.2
43201404
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / cUL Recognized / LR / DNV / GL / GL-SW / BV / ABS / EAC / cULus Recognized / GL
Ex Approvals
UL Listed / cUL Listed / cULus Listed
Approvals submitted
Approval details
UL Recognized
cUL Recognized
cUL Recognized
LR
DNV
GL
GL-SW
07/29/2015 Page 4 / 6
https://www.phoenixcontact.com/us/products/2861483
Inline terminal - IB IL 24 DI 2-NPN-PAC - 2861483
Approvals
BV
ABS
EAC
cULus Recognized
GL
Drawings
Connection diagram
1.1
Dimensional drawing
140,5
2.1
2.2
2.3
1.4
2.4
71,5
1.2
1.3
+24 V
IN 2
IN 1
+24 V
119,8
07/29/2015 Page 5 / 6
https://www.phoenixcontact.com/us/products/2861483
Inline terminal - IB IL 24 DI 2-NPN-PAC - 2861483
Block diagram
Phoenix Contact 2015 © - all rights reserved
http://www.phoenixcontact.com
07/29/2015 Page 6 / 6
很抱歉,暂时无法提供与“2861483”相匹配的价格&库存,您可以联系我们找货
免费人工找货