2861603

https://www.phoenixcontact.com/us/products/2861603 Inline terminal - IB IL 24 DO 8-2A-PAC - 2861603 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline digital output terminal block, complete with accessories (connecting connector and labeling field), 8 outputs, 24 V DC, 2 A, 4-wire connection method Product Features  8 digital outputs  Connection of actuators in 2, 3, and 4-wire technology  Nominal current per output: 2 A  Total current of the terminal: 8 A  Short-circuit-proof and overload-protected outputs  Diagnostic and status indicators  Approved for use in a safety-related segment circuit (refer to data sheet)     Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 220.0 g Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 48.8 mm Height 119.8 mm Depth 71.5 mm Note on dimensions Housing dimensions 11/03/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/2861603 Inline terminal - IB IL 24 DO 8-2A-PAC - 2861603 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Net weight 130 g Note on weight specifications Without plug Mounting type DIN rail Operating mode Process data mode with one byte Protection class III, IEC 61140, EN 61140, VDE 0140-1 Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min Diagnostics messages Short-circuit / overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module Interfaces Fieldbus system Lokalbus Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s Power supply for module electronics Supply voltage 24 V DC (via voltage jumper) Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Communications power UL 7.5 V (via voltage jumper) Current consumption max. 60 mA (from the local bus) Inline potentials Communications power UL 7.5 V DC Current consumption from UL max. 60 mA Main circuit supply UM 24 V DC Segment supply voltage US 24 V DC (nominal value) 11/03/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/2861603 Inline terminal - IB IL 24 DO 8-2A-PAC - 2861603 Technical data Inline potentials Current consumption from US max. 8 A Power consumption max. 0.45 W (at UL) Digital outputs Output name Digital outputs Connection method Spring-cage connection 2, 3, 4-wire Number of outputs 8 Protective circuit Overload protection, short-circuit protection of outputs Output voltage 24 V DC (US - 1 V) Nominal output voltage 24 V DC (voltage difference at Inom ≤ 1 V) Maximum output current per channel 2A Maximum output current per module 8 A (with 50% simultaneity) Nominal load, inductive 48 VA (1.2 H, 12 Ω) Nominal load, lamp 48 W Nominal load, ohmic 48 W Classifications eCl@ss eCl@ss 4.0 27250302 eCl@ss 4.1 27250302 eCl@ss 5.0 27250302 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 ETIM ETIM 2.0 EC001430 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 11/03/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/2861603 Inline terminal - IB IL 24 DO 8-2A-PAC - 2861603 Classifications UNSPSC UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Recognized / cUL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  cUL Recognized  EAC  cULus Recognized  Drawings 11/03/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/2861603 Inline terminal - IB IL 24 DO 8-2A-PAC - 2861603 Connection diagram Dimensional drawing 140,5 3.1 4.1 5.1 6.1 7.1 8.1 1.2 2.2 3.2 4.2 5.2 6.2 7.2 8.2 1.3 2.3 3.3 4.3 5.3 6.3 7.3 8.3 1.4 2.4 3.4 4.4 5.4 6.4 7.4 8.4 119,8 71,5 2.1 OUT 1 +24 V OUT 8 1.1 Block diagram Local bus OPC UL+ UANA UL- 4 4 2 2 2 2 4 4 2 2 2 2 +24 V (US) +24 V (UM) Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 11/03/2015   Page 5 / 5