https://www.phoenixcontact.com/us/products/2861632
Inline function terminal - IB IL PWM/2-PAC - 2861632
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Inline function terminal for pulse width and frequency modulation or activation of impulse-driven motor control
parts with pulse/direction interface, two outputs for 5 V or 24 V
Product Description
Inline terminal IB IL PWM/2 offers the capability of pulse width modulation (PWM) of the output signals. It features two independently operating channels.
Each of the two output signals is available as a 5 V and as a 24 V signal.
Depending on the operating mode, either the high-phase of the period, the period duration, or the frequency can be set. The following four operating
modes are supported:
- Pulse width modulation
- Frequency range
- Single shot and
- Pulse/direction signal outputs
Product Features
Maximum frequency of 50 kHz
Pulse/direction signal output without integrated ramp function to control step motor power sections
2 independent channels
Output of 5 V or 24 V signals
Single pulse output (pulse length of 10 μs to 25.5 s can be set)
Pulse width modulation (period length can be set in increments from 100 µs to 10 s, duty factor in 0.39% increments)
Frequency output (frequency can be set between 0 and 50 kHz)
Key Commercial Data
Packing unit
1 pc
Weight per Piece (excluding packing)
160.0 g
Custom tariff number
85389091
Country of origin
Germany
Technical data
Note
11/03/2015 Page 1 / 6
https://www.phoenixcontact.com/us/products/2861632
Inline function terminal - IB IL PWM/2-PAC - 2861632
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
24.4 mm
Height
136.8 mm
Depth
71.5 mm
Ambient conditions
Ambient temperature (operation)
-25 °C ... 55 °C
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Permissible humidity (operation)
10 % ... 95 % (according to DIN EN 61131-2)
Degree of protection
IP20
General
Net weight
165.1 g
Note on weight specifications
with connectors
Mounting type
DIN rail
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Interfaces
Fieldbus system
Lokalbus
Designation
Inline local bus
Connection method
Inline data jumper
Transmission speed
500 kBit/s
Transmission physics
Copper
Power supply for module electronics
Supply voltage
24 V DC (via voltage jumper)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Ripple
5%
Current consumption
typ. 100 mA
Inline potentials
Communications power UL
7.5 V (via voltage jumper)
Current consumption from UL
max. 130 mA
Segment supply voltage US
24 V DC (nominal value)
Current consumption from US
max. 1 A
Counter inputs
Number of inputs
0
11/03/2015 Page 2 / 6
https://www.phoenixcontact.com/us/products/2861632
Inline function terminal - IB IL PWM/2-PAC - 2861632
Technical data
Counter inputs
Operating mode
PWM, frequency generator, single-shot, pulse/direction signal
Digital outputs
Output name
Digital output: 24 V DC
Connection method
2-wire (shielded)
Number of outputs
max. 2
Output voltage
24 V
Nominal output voltage
24 V
Maximum output current per channel
0.5 A
Maximum output current per module / terminal block
1A
Nominal load, inductive
12 VA
Nominal load, lamp
12 W
Output name
Digital output: 5 V DC
Connection method
2-wire (shielded)
Output voltage
5 V DC
Output current
10 mA (5 V); 500 mA (24 V)
Maximum operating frequency with ohmic nominal load
50 Hz
Classifications
eCl@ss
eCl@ss 4.0
27250302
eCl@ss 4.1
27250302
eCl@ss 5.0
27250304
eCl@ss 5.1
27242605
eCl@ss 6.0
27242605
eCl@ss 7.0
27242605
eCl@ss 8.0
27242605
ETIM
ETIM 2.0
EC001430
ETIM 3.0
EC001599
ETIM 4.0
EC001601
ETIM 5.0
EC001601
UNSPSC
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
11/03/2015 Page 3 / 6
https://www.phoenixcontact.com/us/products/2861632
Inline function terminal - IB IL PWM/2-PAC - 2861632
Classifications
UNSPSC
UNSPSC 11
43172015
UNSPSC 12.01
43201404
UNSPSC 13.2
43201404
Approvals
Approvals
Approvals
UL Listed / cUL Listed / LR / GL / DNV / ABS / RINA / GL-SW / BSH / BV / BSH / BV / DNV / ABS / RINA / GL-SW / GL / cULus Listed
Ex Approvals
Approvals submitted
Approval details
UL Listed
cUL Listed
LR
GL
DNV
ABS
RINA
11/03/2015 Page 4 / 6
https://www.phoenixcontact.com/us/products/2861632
Inline function terminal - IB IL PWM/2-PAC - 2861632
Approvals
GL-SW
BSH
BV
BSH
BV
DNV
ABS
RINA
GL-SW
GL
cULus Listed
Drawings
Connection diagram
1.1
2.1
1.1
2.1
1.2
2.2
1.2
2.2
1.3
2.3
1.3
2.3
1.4
2.4
1.4
2.4
Dimensional drawing
136,8
71,5
OUT 1
5V
OUT 2
24 V
119,8
11/03/2015 Page 5 / 6
https://www.phoenixcontact.com/us/products/2861632
Phoenix Contact 2015 © - all rights reserved
http://www.phoenixcontact.com
11/03/2015 Page 6 / 6
很抱歉,暂时无法提供与“2861632”相匹配的价格&库存,您可以联系我们找货
免费人工找货