2862204

https://www.phoenixcontact.com/us/products/2862204 Inline terminal - IB IL 24 DI 8/T2-PAC - 2862204 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline digital input terminal block, complete with accessories (connector and labeling field), 8 inputs, input in acc. with EN 61131-2/Type 2, 24 V DC, 4-wire connection method Product Description The digital Inline input terminals are designed for the connection of digital signals as are supplied from control switches, limit switches or proximity switches. All the typical applications are covered by the standard automation terminals. The I/O equipment is connected by a simple or an extended Inline connector, depending on the number of channels. The multi-wire connection method is available in both cases. The Inline terminals can be labeled using hinged labeling fields. The fields have insert cards that can be labeled individually to suit the application. Additionally, there is the proven ZBFM-6... Zack strip for labeling the terminal points. Product Features ■ ■ ■ ■ ■ 8 digital inputs corresponding to type 2 limit values, according to EN 61131-2 Connection of sensors in 2, 3, and 4-wire technology Maximum permissible load current per sensor: 250 mA Maximum permissible load current from the terminal: 2 A Diagnostic and status indicators Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 201.7 g Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions 04/11/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2862204 Inline terminal - IB IL 24 DI 8/T2-PAC - 2862204 Technical data Dimensions Width 48.8 mm Height 119.8 mm Depth 71.5 mm Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Mounting type DIN rail Net weight 118 g Note on weight specifications Without plug Interfaces Fieldbus system Lokalbus Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s Power supply for module electronics Supply voltage 24 V DC (via voltage jumper) Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Supply current 50 mA Communications power UL 7.5 V (via voltage jumper) Current consumption max. 50 mA (from the local bus) Inline potentials Communications power UL 7.5 V DC Current consumption from UL max. 50 mA Segment circuit supply US 24 V DC (nominal value) Current consumption from US max. 2 A Digital inputs Input name Digital inputs Connection method Spring-cage connection 04/11/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2862204 Inline terminal - IB IL 24 DI 8/T2-PAC - 2862204 Technical data Digital inputs 4-wire Number of inputs 8 (IEC 61131-2 type 2) Typical response time < 1 ms Protective circuit Short-circuit and overload protection Input voltage 24 V DC (via voltage jumper) Input voltage range "0" signal -3 V DC ... 5 V DC Input voltage range "1" signal 15 V DC ... 30 V DC Standards and Regulations Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Connection in acc. with standard CUL Protection class III, IEC 61140, EN 61140, VDE 0140-1 Classifications eCl@ss eCl@ss 4.0 27250302 eCl@ss 4.1 27250302 eCl@ss 5.0 27250302 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 eCl@ss 9.0 27242604 ETIM ETIM 2.0 EC001430 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 04/11/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2862204 Inline terminal - IB IL 24 DI 8/T2-PAC - 2862204 Classifications UNSPSC UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  EAC  cULus Recognized  Drawings 04/11/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2862204 Inline terminal - IB IL 24 DI 8/T2-PAC - 2862204 Connection diagram Dimensional drawing 140,5 1.1 2.1 3.1 4.1 5.1 6.1 7.1 8.1 4.2 5.2 6.2 7.2 8.2 3.3 4.3 5.3 6.3 7.3 8.3 1.4 2.4 3.4 4.4 5.4 6.4 7.4 8.4 71,5 3.2 2.3 IN 8 2.2 1.3 +24 V 1.2 +24 V IN 1 119,8 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/11/2016   Page 5 / 5