https://www.phoenixcontact.com/us/products/2862372
I/O module - ILB IB 24 DI 8 DO 8 - 2862372
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Inline, Block IO, INTERBUS, Inline shield connector, Digital inputs: 8, 24 V DC, connection method: 3-wire, Digital
outputs: 8, 24 V DC, 500 mA, connection method: 3-wire, degree of protection: IP20, including Inline connector
Your advantages
8 digital inputs
8 digital outputs
Connection of sensors in 2 and 3-wire technology
Connection of actuators in 2 and 3-wire technology
Maximum permissible load current per sensor: 250 mA
Maximum permissible load current from the terminal: 2 A
Nominal current per output: 500 mA
Diagnostic and status indicators
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4017918923853
Weight per Piece (excluding packing)
367.700 g
Custom tariff number
85389091
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
09/08/2019 Page 1 / 8
https://www.phoenixcontact.com/us/products/2862372
I/O module - ILB IB 24 DI 8 DO 8 - 2862372
Technical data
Dimensions
Caption
The figure shows the general dimensional drawing of the Inline Block IO
product family
Width
95 mm
Height
141 mm
Depth
57 mm
Note on dimensions
Specfications with connectors
Ambient conditions
Ambient temperature (operation)
-25 °C ... 60 °C
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Permissible humidity (operation)
max. 85 % (non-condensing)
Permissible humidity (storage/transport)
95 % (non-condensing)
Air pressure (operation)
80 kPa ... 108 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)
66 kPa ... 108 kPa (up to 3500 m above sea level)
Degree of protection
IP20
General
Mounting type
DIN rail
Net weight
350 g
Note on weight specifications
with connectors
Mounting type
NS 35/7,5
Interfaces
Designation
INTERBUS
Connection method
Inline shield connector
Transmission speed
500 kbps
Digital inputs
Input name
Digital inputs
Description of the input
EN 61131-2 type 1
Connection method
Spring-cage connection
Connection technology
3-wire
Number of inputs
8
Typical response time
approx. 500 µs
Type of protection
Short-circuit protection, overload protection of the sensor supply
Input voltage
24 V DC
Input voltage range "0" signal
-30 V DC ... 5 V DC
Input voltage range "1" signal
15 V DC ... 30 V DC
Nominal input current at UIN
5 mA
09/08/2019 Page 2 / 8
https://www.phoenixcontact.com/us/products/2862372
I/O module - ILB IB 24 DI 8 DO 8 - 2862372
Technical data
Digital outputs
Output name
Digital outputs
Connection method
Spring-cage connection
Connection technology
3-wire
Number of outputs
8
Type of protection
Short-circuit and overload protection
Output voltage
24 V DC
Nominal output voltage
24 V DC
Maximum output current per channel
500 mA
Maximum output current per module / terminal block
4A
Maximum output current per module
4A
Nominal load, inductive
12 VA
Nominal load, lamp
12 W
Nominal load, ohmic
12 W
Electrical isolation
Test section
I/Os / incoming remote bus 500 V AC 50 Hz 1 min.
I/Os / outgoing remote bus 500 V AC 50 Hz 1 min.
I/O area / FE 500 V AC 50 Hz 1 min.
Incoming remote bus / FE 500 V AC 50 Hz 1 min.
Outgoing remote bus / FE 500 V AC 50 Hz 1 min.
Incoming remote bus / outgoing remote bus 500 V AC 50 Hz 1 min.
Standards and Regulations
Noise emission
Class B (residential)
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 25g
Connection in acc. with standard
CUL
Protection class
III, IEC 61140, EN 61140, VDE 0140-1
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
09/08/2019 Page 3 / 8
https://www.phoenixcontact.com/us/products/2862372
I/O module - ILB IB 24 DI 8 DO 8 - 2862372
Connection diagram
09/08/2019 Page 4 / 8
https://www.phoenixcontact.com/us/products/2862372
I/O module - ILB IB 24 DI 8 DO 8 - 2862372
Dimensional drawing
The figure shows the general dimensional drawing of the Inline Block IO product family
Classifications
eCl@ss
eCl@ss 4.0
27250302
eCl@ss 4.1
27250302
eCl@ss 5.0
27250302
eCl@ss 5.1
27242600
eCl@ss 6.0
27242600
eCl@ss 7.0
27242604
eCl@ss 8.0
27242604
eCl@ss 9.0
27242604
ETIM
ETIM 2.0
EC001430
ETIM 3.0
EC001599
ETIM 4.0
EC001599
ETIM 5.0
EC001599
ETIM 6.0
EC001599
ETIM 7.0
EC001599
UNSPSC
UNSPSC 6.01
43172015
09/08/2019 Page 5 / 8
https://www.phoenixcontact.com/us/products/2862372
I/O module - ILB IB 24 DI 8 DO 8 - 2862372
Classifications
UNSPSC
UNSPSC 7.0901
43201404
UNSPSC 11
43172015
UNSPSC 12.01
43201404
UNSPSC 13.2
32151602
Accessories
Accessories
End block
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
Labeling panel
Labeling field - IB IL FIELD 2 - 2727501
Labeling field, width: 12.2 mm
Plug
Inline connector - ILB SCN-12-PWR IN-CP - 2863164
Long power connector, color coded, for Inline Block IO
09/08/2019 Page 6 / 8
https://www.phoenixcontact.com/us/products/2862372
I/O module - ILB IB 24 DI 8 DO 8 - 2862372
Accessories
Inline connector - IB IL SCN-12-ICP - 2727611
Connector, color coded, for digital 4, or 16-channel Inline input terminals
Inline connector - IB IL SCN-12-OCP - 2727624
Connector, colored identification, for digital 4, or 16-channel Inline output terminal blocks
Inline shield connector - IB IL SCN-6 SHIELD-CP - 2863151
Shield connector, for INTERBUS connection
Terminal marking
Insert strip - ESL 62X10 - 0809492
Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems: Laser printer, mounting type: insert,
lettering field size: 62 x 10 mm, Number of individual labels: 72
Flat zack marker sheet - ZBFM 6/WH:UNBEDRUCKT - 0803618
Flat zack marker sheet, Sheet, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5 x 5.5 mm, Number of individual
labels: 100
09/08/2019 Page 7 / 8
https://www.phoenixcontact.com/us/products/2862372
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
09/08/2019 Page 8 / 8
