2862835

https://www.phoenixcontact.com/us/products/2862835 Inline terminal - IB IL 24 DI 32/HD-PAC - 2862835 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Inline digital input terminal block, complete with accessories (connector and labeling field), 32 inputs, 24 V DC, single-wire connection method Product Description The terminal is designed for use within an Inline station. It is used to acquire digital input signals. Product Features ■ ■ ■ ■ 32 digital inputs Connection of sensors in single-wire technology Diagnostic and status indicators Approved for use in potentially explosive areas (refer to data sheet) Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 218.0 g Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 48.8 mm Height 119.8 mm Depth 71.5 mm Note on dimensions Housing dimensions 04/19/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2862835 Inline terminal - IB IL 24 DI 32/HD-PAC - 2862835 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -25 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Mounting type DIN rail Net weight 192.41 g Note on weight specifications with connectors Diagnostics messages No None Interfaces Fieldbus system Lokalbus Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s Power supply for module electronics Supply voltage 24 V DC (via voltage jumper) Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Ripple 5% Supply current max. 90 mA Power dissipation max. 2.16 W (Within the permissible operating temperature) Derating No derating Communications power UL 7.5 V (via voltage jumper) Current consumption max. 90 mA (from the local bus) Power consumption max. 0.675 W (at UL) Inline potentials Communications power UL 7.5 V DC Current consumption from UL max. 90 mA Segment circuit supply US 24 V DC Current consumption from US 50 mA Power consumption max. 0.675 W (at UL) Digital inputs Input name Digital inputs 04/19/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2862835 Inline terminal - IB IL 24 DI 32/HD-PAC - 2862835 Technical data Digital inputs Description of the input EN 61131-2 type 1 Connection method Spring-cage connection 1-wire Number of inputs 32 Typical response time 2 ms Protective circuit Short-circuit and overload protection Input voltage 24 V DC (via voltage jumper) Input voltage range "0" signal -3 V DC ... 5 V DC Input voltage range "1" signal 15 V DC ... 30 V DC Nominal input current at UIN typ. 2.8 mA Typical input current per channel 2.8 mA Delay at signal change from 0 to 1 2 ms Delay at signal change from 1 to 0 4 ms Standards and Regulations Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Connection in acc. with standard CUL Protection class III, IEC 61140, EN 61140, VDE 0140-1 Classifications eCl@ss eCl@ss 4.0 27250302 eCl@ss 4.1 27250302 eCl@ss 5.0 27250302 eCl@ss 5.1 27242604 eCl@ss 6.0 27242604 eCl@ss 7.0 27242604 eCl@ss 8.0 27242604 eCl@ss 9.0 27242604 ETIM ETIM 2.0 EC001430 ETIM 3.0 EC001599 04/19/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2862835 Inline terminal - IB IL 24 DI 32/HD-PAC - 2862835 Classifications ETIM ETIM 4.0 EC001599 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Recognized / cUL Recognized / LR / BV / ABS / BSH / EAC / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals ATEX / UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Recognized  cUL Recognized  LR  BV  04/19/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2862835 Inline terminal - IB IL 24 DI 32/HD-PAC - 2862835 Approvals ABS  BSH  EAC  UL Recognized  cUL Recognized  cULus Recognized  Drawings Connection diagram 1.1 2.1 3.1 4.1 5.1 6.1 7.1 8.1 1.2 2.2 3.2 4.2 5.2 6.2 7.2 8.2 IN1 +24 V IN7 Dimensional drawing 140,5 119,8 IN26 1.3 2.3 3.3 4.3 5.3 6.3 7.3 8.3 1.4 2.4 3.4 4.4 5.2 6.4 7.2 8.4 +24 V IN32 +24 V +24 V 71,5 +24 V 04/19/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2862835 Inline terminal - IB IL 24 DI 32/HD-PAC - 2862835 Block diagram Local bus OPC UL 8 4x 16 4x 4x 4x 4x 4x 4x 4x +24 V (US) +24 V (UM) Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/19/2016   Page 6 / 6