Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user
documentation. Our General Terms of Use for Downloads are valid.
MCR repeater power supply with HART transparency, input signal: 4 mA ... 20 mA, output signal:
4 mA ... 20 mA, with screw connection
Product Description
The 6.2 mm wide MINI MCR-SL-RPSS-I-I... repeater power supply supplies the transmitter in the field in case of simultaneous galvanic 3-way
separation between input, output and supply.
HART data protocols can be transmitted bidirectionally. The module can be used in both isolator and repeater power supply operation.
On the input and output side, the analog standard signals 0...20 mA or 4...20 mA are available, electrically isolated.
Voltage (20.4 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.
Your advantages
• Bidirectional HART transmission as an option
• Power supply possible via the foot element (TBUS)
• Can be used as an isolator with passive input
• Highly-compact repeater power supplies for electrical isolation, amplification, and filtering of standard analog signals
• Supply of 2-conductor and passive 3-conductor sensors
• 3-way isolation
Commercial Data
Item number
2864079
Packing unit
1 pc
Minimum order quantity
1 pc
Sales Key
C01
Product Key
CK1211
Catalog Page
Page 99 (C-7-2015)
GTIN
4046356046428
Weight per Piece (including packing)
87.8 g
Weight per Piece (excluding packing)
87.8 g
Customs tariff number
85437090
Country of origin
DE
Oct 27, 2022, 7:20 PM
Page 1 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Technical Data
Notes
Utilization restriction
EMC note
EMC: class A product, see manufacturer's declaration in the
download area
Product properties
Product type
Repeater power supplies
No. of channels
1
Insulation characteristics
Overvoltage category
II
Pollution degree
2
Electrical properties
No. of channels
1
Electrical isolation
3-way isolation
Electrical isolation between input and output
yes
Limit frequency (3 dB)
175 Hz (typ.)
Maximum power dissipation for nominal condition
700 mW (24 V DC)
400 mW (24 V DC)
Protective circuit
Transient protection
Signal transmission behavior
In = Out
Step response (10-90%)
< 2 ms
Maximum temperature coefficient
< 0.005 %/K
Temperature coefficient, typical
< 0.002 %/K
Maximum transmission error
≤ 0.2 % (of final value)
Transmission error, typical
≤ 0.1 % (of final value)
Electrical isolation Input/output/power supply
Rated insulation voltage
50 V AC/DC
Test voltage
1.5 kV AC (50 Hz, 60 s)
Insulation
Basic insulation in accordance with IEC/EN 61010
Supply
Nominal supply voltage
24 V DC
Supply voltage range
20.4 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the
supply voltage. It can be snapped onto a 35 mm DIN rail in
accordance with EN 60715)
Power consumption
< 900 mW (at 24 V DC and in repeater power supply operation)
< 600 mW (at 24 V DC and in isolator operation)
Input data
Oct 27, 2022, 7:20 PM
Page 2 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Signal: Current
Description of the input
Sensor circuit
Number of inputs
1
Current input signal
0 mA ... 20 mA (isolator operation)
4 mA ... 20 mA (repeater power supply and isolator operation)
Max. current input signal
28 mA
Input resistance current input
approx. 50 Ω
Transmitter supply voltage
16.5 V
Output data
Signal: Current
Number of outputs
1
Non-load voltage
approx. 12.5 V
Current output signal
0 mA ... 20 mA (isolator operation)
4 mA ... 20 mA (repeater power supply and isolator operation)
Max. current output signal
> 21 mA (22.5 mA, typical)
Load/output load current output
≤ 500 Ω (I = 20 mA)
Ripple
< 20 mVrms (at 500 Ω)
Connection data
Connection method
Screw connection
Stripping length
12 mm
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 12
Interfaces
Data communication (bypass)
HART function
Yes
Limit frequency (3 dB)
approx. 2.5 Hz
Dimensions
Dimensional drawing
Width
6.2 mm
Height
93.1 mm
Depth
101.2 mm
Oct 27, 2022, 7:20 PM
Page 3 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Material specifications
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Housing material
PBT
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
≤ 2000 m
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Approval data
CE
Certificate
CE-compliant
UKCA
Certificate
UKCA-compliant
UL, USA / Canada
Identification
UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC
Shipbuilding approval
Certificate
DNV GL TAA000020N
DNV GL data
Temperature
B
Humidity
B
Vibration
B
EMC
A
Enclosure
Required protection according to the Rules shall be provided
upon installation on board
EMC data
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2
Note
When being exposed to interference, there may be minimal
deviations.
Electrostatic discharge
Oct 27, 2022, 7:20 PM
Page 4 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Standards/regulations
EN 61000-4-2
Electrostatic discharge
Comments
Safety measures must be taken to prevent electrostatic
discharge.
Electromagnetic HF field
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Typical deviation from the measuring range final value
3%
Fast transients (burst)
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Typical deviation from the measuring range final value
3%
Surge current load (surge)
Standards/regulations
EN 61000-4-5
Surge current load (surge)
Comments
Criterion B
Conducted interference
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Typical deviation from the measuring range final value
3%
Standards and regulations
Electrical isolation
3-way isolation
Mounting
Mounting type
DIN rail mounting
Assembly instructions
The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item
no. 2869728) can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail in accordance with EN 60715.
Mounting position
any
Oct 27, 2022, 7:20 PM
Page 5 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Drawings
Application drawing
1
2
3
Control system
4
IN I
PWR OUT
GND1
GND1
OUT I
Actuator
5
GND2
UB
6
UB +
GND3
MINI MCR-SL-RPSS-I-I
7
8
24V
Mains voltage
Isolator operation at the analog output module
Oct 27, 2022, 7:20 PM
Page 6 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Block diagram
IN
Sensor / Field
OUT I
2-wire
1
3-wire
–
PWR
2
IN
OUT I
1
PWR
2
IN
3
GND
OUT I
US 4-wire
GND
1
3
OUT
2
+
–
–
4
3
1
IN I
PWR OUT
GND 1
OUT I
active
GND 2
PLC / DCS
5
6
+24V
GND 1
5
+
GND 3
passive
6
–
7
+
8
–
+24V
GND 3
Oct 27, 2022, 7:20 PM
Page 7 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Application drawing
Sensor
1
UB
2
3
4
IN I
PWR OUT
GND1
GND1
OUT I
5
GND2
6
UB +
GND3
MINI MCR-SL-RPSS-I-I
Control system
7
8
24V
Mains voltage
Isolator operation with an active sensor
Oct 27, 2022, 7:20 PM
Page 8 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Dimensional drawing
6,2
102,5
93,1
Oct 27, 2022, 7:20 PM
Page 9 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Application drawing
4...20mA
1
2
3
4
IN I
PWR OUT
GND1
GND1
OUT I
5
GND2
6
UB +
GND3
MINI MCR-SL-RPSS-I-I
Control system
7
8
24V
Mains voltage
Repeater power supply operation with a passive sensor
Oct 27, 2022, 7:20 PM
Page 10 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Approvals
UL Listed
cUL Listed
Approval ID: FILE E 238705
Approval ID: FILE E 238705
cUL Recognized
UL Recognized
Approval ID: FILE E 199827
Approval ID: FILE E 199827
cULus Listed
cULus Recognized
Oct 27, 2022, 7:20 PM
Page 11 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Classifications
ECLASS
ECLASS-9.0
27210120
ECLASS-10.0.1
27210120
ECLASS-11.0
27210120
ETIM
ETIM 8.0
EC002653
UNSPSC
UNSPSC 21.0
39121000
Oct 27, 2022, 7:20 PM
Page 12 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Oct 27, 2022, 7:20 PM
Page 13 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Accessories
Cable adapter
Cable adapter - GW HART USB MODEM - 1003824
https://www.phoenixcontact.com/us/products/1003824
USB HART modem cable for communication between a PC and HART devices,
cable length: 1m.
Power terminal block
Power terminal block - MINI MCR-SL-PTB - 2864134
https://www.phoenixcontact.com/us/products/2864134
MCR power terminal block for supplying several MINI Analog modules via the
DIN rail connector, with screw connection, maximum current consumption of up
to 2 A
Oct 27, 2022, 7:20 PM
Page 14 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Power supply unit
Power supply unit - QUINT4-SYS-PS/1AC/24DC/2.5/SC - 2904614
https://www.phoenixcontact.com/us/products/2904614
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail
mounting, input: 1-phase, output: 24 V DC / 2.5 A
DIN rail bus connectors
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
https://www.phoenixcontact.com/us/products/2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Goldplated contacts, 5-pos.
Oct 27, 2022, 7:20 PM
Page 15 (16)
Repeater power supply - MINI MCR-SL-RPSS-I-I
2864079
https://www.phoenixcontact.com/us/products/2864079
Transparent cover
Transparent cover - MINI MCR DKL - 2308111
https://www.phoenixcontact.com/us/products/2308111
Fold up transparent cover for MINI MCR modules with additional labeling option
using insert strips and flat Zack marker strip 6.2 mm
Marking label
Marking label - MINI MCR-DKL-LABEL - 2810272
https://www.phoenixcontact.com/us/products/2810272
Label for extended marking of MINI MCR modules in connection with the MINI
MCR-DKL
Phoenix Contact 2022 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Oct 27, 2022, 7:20 PM
Page 16 (16)
