Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user
documentation. Our General Terms of Use for Downloads are valid.
Configurable NAMUR switching amplifier for proximity sensors, floating switching contacts and
switching contacts with resistance circuit. On the output side 2 N/O contact, with screw
connection
Product Description
The 6.2 mm wide MINI MCR-SL-NAM-2RNO.... is a configurable 4-way isolation amplifier. It is suited for the operation of proximity sensors in acc.
with EN 60947-5-6 and switches and also has two relay outputs. The second output can either be used to duplicate signals or for signaling faults for
the sensor line.
The DIP switches are accessible on the housing side and allow the following parameters to be configured:
- Switchover from open circuit to closed circuit current behavior
- Activation of line fault detection of the sensor line as well as
- Selection of signal duplication/fault signaling
Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.
Your advantages
• Floating contacts and contacts with resistance circuit can be connected
• Power supply possible via the foot element (TBUS)
• Highly compact isolation amplifier for electrical isolation, amplification, and duplication of proximity sensor signals
• For proximity sensors according to IEC 60947-5-6 and EN 50227
• Second output can be used as a duplicator or error signaling output
• Error indication via diagnostic LED and analog signal
• N/O contacts at output
• Input and output signals can be configured via DIP switches
• Operating current/closed circuit current switch-over (inverted switching behavior)
Commercial Data
Item number
2864105
Packing unit
1 pc
Minimum order quantity
1 pc
Sales Key
C01
Product Key
CK1241
Catalog Page
Page 112 (C-7-2015)
GTIN
4046356046459
Weight per Piece (including packing)
99.9 g
Weight per Piece (excluding packing)
71.2 g
Customs tariff number
85365019
Country of origin
DE
Oct 27, 2022, 7:32 AM
Page 1 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Technical Data
Notes
Utilization restriction
EMC note
EMC: class A product, see manufacturer's declaration in the
download area
Product properties
Product type
Isolating switch transf.
No. of channels
1
Configuration
DIP switches
Insulation characteristics
Overvoltage category
II
Pollution degree
2
Electrical properties
No. of channels
1
Rated insulation voltage
150 V AC (Input/relay outputs (reinforced insulation))
150 V AC (Supply/relay outputs (reinforced insulation))
150 V AC (Relay output 1/relay output 2 (reinforced insulation))
30 V AC (Input/supply)
50 V DC (Input/supply)
Electrical isolation
Reinforced insulation in accordance with EN 61010-1
Electrical isolation between input and output
yes
Test voltage, input/output/supply
1.5 kV AC (50 Hz, 60 s)
Supply
Designation
Supply
Nominal supply voltage
24 V DC
Supply voltage range
19.2 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the
supply voltage. It can be snapped onto a 35 mm DIN rail in
accordance with EN 60715)
Max. current consumption
< 25 mA
Power consumption
< 600 mW
Input data
Signal: NAMUR
Number of inputs
1
Available input sources
NAMUR proximity sensors (IEC/EN 60947-5-6)
Floating switch contacts
Switch contacts with resistance circuit
Switching threshold "0" signal current
< 1.2 mA (blocking)
Switching threshold "1" signal, current
> 2.1 mA (conductive)
Oct 27, 2022, 7:32 AM
Page 2 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Line fault detection
> 6 mA (Short circuit)
< 0.35 mA (Line break)
Activated /deactivated via DIP switch
Non-load voltage
8.2 V DC ±10 %
Output data
Switching: Relay
Output description
Output 1: Signal output; Output 2: Fault signaling output or signal
duplicator, can be set via DIP switches
Contact type
2 N/O contacts
Contact material
Hard gold plated AgNi
Maximum switching voltage
250 V AC
125 V DC
150 V AC (UL)
125 V DC (UL)
Maximum inrush current
2A
Min. switching current
1 mA (5 V DC)
Typical response time
15 ms
Typical turn-off time
20 ms
Switching frequency
0.5 Hz (240 V AC / 30 V DC / 2 A)
10 Hz (without load)
Signal:
Number of outputs
2
Connection data
Connection method
Screw connection
Stripping length
12 mm
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 12
LED signaling
Status display
Red LED (error messages)
Yellow LED (relay status messages)
Dimensions
Dimensional drawing
Oct 27, 2022, 7:32 AM
Page 3 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Width
6.2 mm
Height
93.1 mm
Depth
101.2 mm
Material specifications
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Housing material
PBT
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-20 °C ... 65 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
≤ 2000 m
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Approval data
CE
Certificate
CE-compliant
UKCA
Certificate
UKCA-compliant
UL, USA / Canada
Identification
UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T4
Shipbuilding approval
Certificate
DNV GL TAA000020N
DNV GL data
Temperature
B
Humidity
B
Vibration
B
EMC
A
Enclosure
Required protection according to the Rules shall be provided
upon installation on board
EMC data
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2
Note
When being exposed to interference, there may be minimal
deviations.
Oct 27, 2022, 7:32 AM
Page 4 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Electromagnetic HF field
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Evaluation criterion
A
Fast transients (burst)
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Evaluation criterion
A
Conducted interference
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Evaluation criterion
A
Standards and regulations
Electrical isolation
Reinforced insulation in accordance with EN 61010-1
Mounting
Mounting type
DIN rail mounting
Mounting position
any
Oct 27, 2022, 7:32 AM
Page 5 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Drawings
Dimensional drawing
6,2
102,5
93,1
Oct 27, 2022, 7:32 AM
Page 6 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Block diagram
IN
Sensor / Field
1
2
+
2
–
1
3
2
1
OUT
4
1
IN
OUT 1
PLC / DCS
5
OUT 1
IN
OUT 2
+24V
OUT 2
GND
2
GND
+24V
5
13
DI 1
6
7
6
14
3
13
+
8
–
DI 2
4
14
Oct 27, 2022, 7:32 AM
Page 7 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Approvals
cUL Recognized
UL Recognized
Approval ID: FILE E 238705
Approval ID: FILE E 238705
DNV GL
cUL Listed
UL Listed
Approval ID: TAA00000N1
Approval ID: FILE E 199827
Approval ID: FILE E 199827
cULus Recognized
cULus Listed
Oct 27, 2022, 7:32 AM
Page 8 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Classifications
ECLASS
ECLASS-9.0
27210121
ECLASS-10.0.1
27210121
ECLASS-11.0
27210121
ETIM
ETIM 8.0
EC001485
UNSPSC
UNSPSC 21.0
39121000
Oct 27, 2022, 7:32 AM
Page 9 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Oct 27, 2022, 7:32 AM
Page 10 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Accessories
Power terminal block
Power terminal block - MINI MCR-SL-PTB - 2864134
https://www.phoenixcontact.com/us/products/2864134
MCR power terminal block for supplying several MINI Analog modules via the
DIN rail connector, with screw connection, maximum current consumption of up
to 2 A
Power supply unit
Power supply unit - QUINT4-SYS-PS/1AC/24DC/2.5/SC - 2904614
https://www.phoenixcontact.com/us/products/2904614
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail
mounting, input: 1-phase, output: 24 V DC / 2.5 A
Oct 27, 2022, 7:32 AM
Page 11 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
DIN rail bus connectors
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
https://www.phoenixcontact.com/us/products/2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Goldplated contacts, 5-pos.
Transparent cover
Transparent cover - MINI MCR DKL - 2308111
https://www.phoenixcontact.com/us/products/2308111
Fold up transparent cover for MINI MCR modules with additional labeling option
using insert strips and flat Zack marker strip 6.2 mm
Oct 27, 2022, 7:32 AM
Page 12 (13)
Switching amplifier - MINI MCR-SL-NAM-2RNO
2864105
https://www.phoenixcontact.com/us/products/2864105
Marking label
Marking label - MINI MCR-DKL-LABEL - 2810272
https://www.phoenixcontact.com/us/products/2810272
Label for extended marking of MINI MCR modules in connection with the MINI
MCR-DKL
Phoenix Contact 2022 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Oct 27, 2022, 7:32 AM
Page 13 (13)
