2864176

https://www.phoenixcontact.com/us/products/2864176 Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) 4-way signal duplicator for electrical isolation and duplication of analog signals with screw connection, standard configuration Product Description The 6.2 mm wide configurable 4-way isolating amplifier MINI MCR-SL-UI-2I-... is used for electrical isolation, conversion, amplification and filtering of standard signals. On the input side, the analog standard signals 0...20 mA, 4...20 mA, 0...10 V or 1...5V can be selected, on the output side there are two current outputs that can be set independently of one another with a 0...20 mA-, or 4...20mA signal, electrically isolated (4-way isolation). The DIP switches, which can be accessed on the side of the housing, can be used to configure the input and output signal ranges. Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector. Your advantages  Power supply possible via the foot element (TBUS)  Highly-compact isolating amplifier for electrical isolation, conversion, amplification, filtering, and duplication of standard analog signals  Up to 8 signal combinations can be configured using DIP switches  4-way isolation  Duplication of a standard analog signal on two current outputs Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918974800 Weight per Piece (excluding packing) 95.000 g Custom tariff number 85437090 Country of origin Germany 09/10/2019   Page 1 / 9 https://www.phoenixcontact.com/us/products/2864176 Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (non-condensing) Degree of protection IP20 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Input data Number of inputs 1 Configurable/programmable Yes, unconfigured Voltage input signal 0 V ... 10 V (please indicate if different setting when ordering) 1 V ... 5 V Current input signal 0 mA ... 20 mA 4 mA ... 20 mA max. input voltage 30 V Max. input current 50 mA Input resistance of voltage input approx. 100 kΩ Input resistance current input approx. 50 Ω Output data Number of outputs 2 Configurable/programmable Yes, unconfigured Current output signal 2x 0 mA ... 20 mA 2x 4 mA ... 20 mA Max. output current approx. 22 mA Load/output load current output ≤ 250 Ω (at 20 mA) Ripple < 20 mVPP (at 250 Ω) Power supply Nominal supply voltage 24 V DC 09/10/2019   Page 2 / 9 https://www.phoenixcontact.com/us/products/2864176 Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176 Technical data Power supply Supply voltage range 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Max. current consumption < 30 mA (at 24 V DC incl. load) Power consumption < 600 mW Connection data Connection method Screw connection Stripping length 12 mm Screw thread M3 Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 12 General No. of channels 2 Maximum transmission error ≤ 0.2 % (of final value) Transmission error, typical < 0.1 % Maximum temperature coefficient < 0.01 %/K Temperature coefficient, typical < 0.004 %/K Limit frequency (3 dB) approx. 35 Hz Protective circuit Transient protection Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Degree of pollution 2 Rated insulation voltage 50 V AC/DC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T5 09/10/2019   Page 3 / 9 https://www.phoenixcontact.com/us/products/2864176 Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176 Technical data General GL GL EMC 2 D Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 5% Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 5% Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 5% Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Connection in acc. with standard CUL Standards/regulations EN 61000-4-2 Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Basic insulation according to EN 61010 Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T5 GL GL EMC 2 D Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 09/10/2019   Page 4 / 9 https://www.phoenixcontact.com/us/products/2864176 Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176 Technical data Environmental Product Compliance For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Block diagram 09/10/2019   Page 5 / 9 https://www.phoenixcontact.com/us/products/2864176 Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27210100 eCl@ss 4.1 27210100 eCl@ss 5.0 27210100 eCl@ss 5.1 27210100 eCl@ss 6.0 27210100 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 eCl@ss 9.0 27210120 ETIM ETIM 4.0 EC002653 ETIM 5.0 EC002653 09/10/2019   Page 6 / 9 https://www.phoenixcontact.com/us/products/2864176 Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176 Classifications ETIM ETIM 6.0 EC002653 ETIM 7.0 EC002653 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals GL / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed Approval details GL    https://approvalfinder.dnvgl.com/  24917-05 HH UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cULus Recognized       09/10/2019   Page 7 / 9 https://www.phoenixcontact.com/us/products/2864176 Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176 Accessories Accessories DIN rail connector DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Marking material Transparent cover - MINI MCR DKL - 2308111 Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm     Marking label - MINI MCR-DKL-LABEL - 2810272 Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL     Power module Power terminal block - MINI MCR-SL-PTB - 2864134 MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with screw connection, maximum current consumption of up to 2 A     09/10/2019   Page 8 / 9 https://www.phoenixcontact.com/us/products/2864176 Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176 Accessories Power terminal block - MINI MCR-SL-PTB-SP - 2864147 MCR feed-in terminal for supplying several MINI Analog modules via a DIN rail connector, with spring-cage connection, maximum current consumption of up to 2 A. Replacement part: 2902067 MINI MCR-2-PTB-PT.     Power supply Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983 Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A     Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653 Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the potentially explosive area     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/10/2019   Page 9 / 9