2864273

Extract from the online catalog   MINI MCR-SL-PT100-UI-NC   Order No.: 2864273 The illustration shows the versions with screw connection http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864273   MCR temperature transducer for Pt 100 temperature sensors, configured via DIP switch, with screw connection, not pre-configured   Product notes WEEE/RoHS-compliant since: 09/25/2006 Commercial data EAN 4017918956561 sales group H523 Pack 1 pcs. Customs tariff 85437090 Weight/Piece 0.0751 KG Catalog page information Page 340 (IF-2009) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Product description The 6.2 mm wide MINI MCR-SL-PT100-UI... is a configurable 3-way isolated temperature measuring transducer. It is suitable for the connection of Pt 100 resistance thermometers according to IEC 60751 in 2, 3 and 4-wire connection methods. On the output side, the analog standard signals 0...20 mA, 4...20 mA, 0...10 V, 0...5 V, 1...5 V, 10...0 V, 20...0 mA or 20...4 mA are available, electrically isolated. The DIP switches are accessible on the side of the housing and allow the following parameters to be configured: PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 7 Apr 30, 2010 MINI MCR-SL-PT100-UI-NC Order No.: 2864273 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864273 – Connection method – Temperature range to be measured – Output signal as well – Fault evaluation type Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector. Technical data Input data Configurable/programmable Yes Sensor types (RTD) that can be used Pt 100 (IEC 60751/EN 60751) Sensor input current 1 mA (constant) Connection method 2, 3, 4-wire Output data Configurable/programmable Yes, unconfigured Voltage output signal 0 V ... 10 V 10 V ... 0 V 0 V ... 5 V 1 V ... 5 V Current output signal 0 mA ... 20 mA 4 mA ... 20 mA 20 mA ... 0 mA 20 mA ... 4 mA Max. output voltage Approx. 12.5 V Max. output current 23 mA Load/output load voltage output ≥ 10 kΩ Load/output load current output < 500 Ω (at 20 mA) Power supply Nominal supply voltage 24 V DC Range of supply voltages 19.2 V DC ... 30 V DC (to bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715) Max. current consumption < 21 mA (for 24 V DC) Power consumption < 500 mW PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 2 / 7 Apr 30, 2010 MINI MCR-SL-PT100-UI-NC Order No.: 2864273 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864273 Connection data Type of connection Screw connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 12 Stripping length 12 mm Screw thread M3 General data No. of channels 1 Width 6.2 mm Height 93.1 mm Depth 102.5 mm Maximum temperature coefficient < 0.02 %/K Step response (10-90%) < 160 ms Protective circuitry Transient protection Ambient temperature (operation) -20 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Pollution degree 2 Surge voltage category II Electromagnetic compatibility Conformance with EMC directive 2004/108/EC Emitted interference EN 61000-6-4 Immunity to interference EN 61000-6-2:2005 Color green Housing material PBT Mounting position Any Assembly instructions The DIN rail bus connector (T-BUS) can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail. Conformity CE compliant ATEX � II 3 G Ex nA II T4 X UL, USA / Canada UL 508 Recognized GL GL EMC 2 D PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 3 / 7 Apr 30, 2010 MINI MCR-SL-PT100-UI-NC Order No.: 2864273 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864273 Certificates / Approvals Certification CUL, GL, UL Certification Ex: CUL-EX LIS, UL-EX LIS Accessories Item Designation Description 2308111 MINI MCR DKL Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm 2810272 MINI MCR-DKL-LABEL Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL 2864134 MINI MCR-SL-PTB MCR power terminal block for supplying several MINI Analog modules via the DIN rail connectors, with screw connection, current consumption up to max. 2 A 2864147 MINI MCR-SL-PTB-SP MCR power terminal block for supplying several MINI-ANALOG modules via the DIN rail connectors, with spring-cage connection, current consumption up to max. 2 A 2811268 MINI MCR-SL-V8-FLK 16-A Eight MINI analog signal converters with screw connection method can be connected to a control system using a system adapter and system cabling with a minimum of wiring and very low error risk. 2866653 MINI-PS-100-240AC/24DC/1.5/ EX DIN rail power supply unit, primary-switched mode, slim design, output: 24 V DC / 1.5 A, ATEX approval 2866983 MINI-SYSPS-100-240AC/24DC/1.5 DIN rail power supply unit, primary-switched mode, slim design, output: 24 V DC / 1.5 A General PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 7 Apr 30, 2010 MINI MCR-SL-PT100-UI-NC Order No.: 2864273 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864273 Diagrams/Drawings Dimensioned drawing Circuit diagram PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 5 / 7 Apr 30, 2010 MINI MCR-SL-PT100-UI-NC Order No.: 2864273 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864273 Approbationslogos (EX-Bereich) PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 6 / 7 Apr 30, 2010 MINI MCR-SL-PT100-UI-NC Order No.: 2864273 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864273 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de © 2010 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 7 / 7 Apr 30, 2010