Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user
documentation. Our General Terms of Use for Downloads are valid.
MCR temperature transducer, configurable, for Pt 100 temperature sensors, with screwconnection, not configured
Your advantages
• Power supply possible via the foot element (TBUS)
• Optimized temperature measuring range of -50°C to +200°C for increased accuracy
• For 2-, 3-, 4-conductor Pt 100 sensors in accordance with IEC 60751
• Error indication via diagnostic LED and analog signal
• Pt 100 signals to create standard signals
• 3-way isolation
• Highly-compact temperature transducer for electrical isolation, conversion, amplification, and filtering of
• Input and output signals can be configured via DIP switches
Commercial Data
Item number
2864370
Packing unit
1 pc
Minimum order quantity
1 pc
Sales Key
C01
Product Key
CK1221
Catalog Page
Page 104 (C-7-2015)
GTIN
4046356046480
Weight per Piece (including packing)
98.56 g
Weight per Piece (excluding packing)
58.57 g
Customs tariff number
85437090
Country of origin
DE
Oct 27, 2022, 7:32 AM
Page 1 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Technical Data
Notes
Utilization restriction
EMC note
EMC: class A product, see manufacturer's declaration in the
download area
Product properties
Product type
Temperature transmitter
Configuration
DIP switches
Insulation characteristics
Overvoltage category
II
Pollution degree
2
Electrical properties
Maximum power dissipation for nominal condition
235.5 mW
Protective circuit
Transient protection
Step response (0–99%)
< 200 ms
Maximum temperature coefficient
< 0.02 %/K
Transmission error in the set measuring range
((50 K / Δ Temp)+ 0.05)%
Transmission error in the full measuring range
≤ 0,25 %
Electrical isolation Input/output/power supply
Rated insulation voltage
50 V AC/DC
Test voltage
1.5 kV AC (50 Hz, 60 s)
Insulation
Basic insulation in accordance with IEC/EN 61010
Supply
Nominal supply voltage
24 V DC
Supply voltage range
19.2 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the
supply voltage. It can be snapped onto a 35 mm DIN rail in
accordance with EN 60715)
Max. current consumption
< 21 mA (at 24 V DC)
Power consumption
< 500 mW
Input data
Signal:
Number of inputs
1
Measurement
Sensor types (RTD) that can be used
Pt 100 (IEC 60751/EN 60751)
Temperature measuring range
min. 50 K
Oct 27, 2022, 7:32 AM
Page 2 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Sensor type:
-50 °C ... 200 °C (configurable)
Sensor input current
1 mA (constant)
Max. permissible overall conductor resistance
10 Ω (Per cable)
Connection technology
2-, 3-, 4-conductor
Output data
Signal: Voltage/current
Number of outputs
1
Configurable/programmable
Yes
Voltage output signal
0 V ... 5 V
1 V ... 5 V
0 V ... 10 V
10 V ... 0 V
Max. voltage output signal
approx. 12.5 V
Non-load voltage
approx. 12.5 V
Current output signal
0 mA ... 20 mA
4 mA ... 20 mA
20 mA ... 0 mA
20 mA ... 4 mA
Max. current output signal
23 mA
Short-circuit current
approx. 10 mA
Load/output load voltage output
> 10 kΩ
Load/output load current output
< 500 Ω (at 20 mA)
Ripple
< 20 mVPP (at 500 Ω)
< 20 mVPP (at 10 kΩ)
Connection data
Connection method
Screw connection
Stripping length
12 mm
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 12
Dimensions
Dimensional drawing
Width
6.2 mm
Oct 27, 2022, 7:32 AM
Page 3 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Height
93.1 mm
Depth
101.2 mm
Material specifications
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Housing material
PBT
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-20 °C ... 65 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
≤ 2000 m
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Approval data
CE
Certificate
CE-compliant
UKCA
Certificate
UKCA-compliant
UL, USA / Canada
Identification
UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T5
Shipbuilding approval
Certificate
DNV GL TAA00002R0
DNV GL data
Temperature
B
Humidity
B
Vibration
B
EMC
A
Enclosure
Required protection according to the Rules shall be provided
upon installation on board
EMC data
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2
Note
When being exposed to interference, there may be minimal
Oct 27, 2022, 7:32 AM
Page 4 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
deviations.
Electrostatic discharge
Standards/regulations
EN 61000-4-2
Electrostatic discharge
Comments
Safety measures must be taken to prevent electrostatic
discharge.
Electromagnetic HF field
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Typical deviation from the measuring range final value
10 %
Fast transients (burst)
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Typical deviation from the measuring range final value
10 %
Surge current load (surge)
Standards/regulations
EN 61000-4-5
Surge current load (surge)
Comments
Criterion B
Conducted interference
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Typical deviation from the measuring range final value
10 %
Mounting
Mounting type
DIN rail mounting
Mounting position
any
Oct 27, 2022, 7:32 AM
Page 5 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Drawings
Dimensional drawing
6,2
102,5
93,1
Oct 27, 2022, 7:32 AM
Page 6 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Block diagram
IN
Sensor / Field
PT 100
ϑ
ϑ
OUT
1
ϑ
1
2
2
3
3
4
OUT U,I
active
GND 1
PLC / DCS
5 +
6 –
+24V
4
GND 2
5
passive
6
7 +
8 –
+24V
GND 2
Oct 27, 2022, 7:32 AM
Page 7 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Approvals
cUL Recognized
UL Recognized
Approval ID: FILE E 238705
Approval ID: FILE E 238705
DNV GL
cUL Listed
UL Listed
Approval ID: TAA00002R0
Approval ID: FILE E 199827
Approval ID: FILE E 199827
cULus Recognized
cULus Listed
Oct 27, 2022, 7:32 AM
Page 8 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Classifications
ECLASS
ECLASS-9.0
27210129
ECLASS-10.0.1
27210129
ECLASS-11.0
27210129
ETIM
ETIM 8.0
EC002919
UNSPSC
UNSPSC 21.0
41112100
Oct 27, 2022, 7:32 AM
Page 9 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Oct 27, 2022, 7:32 AM
Page 10 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Accessories
Power terminal block
Power terminal block - MINI MCR-SL-PTB - 2864134
https://www.phoenixcontact.com/us/products/2864134
MCR power terminal block for supplying several MINI Analog modules via the
DIN rail connector, with screw connection, maximum current consumption of up
to 2 A
Power supply unit
Power supply unit - QUINT4-SYS-PS/1AC/24DC/2.5/SC - 2904614
https://www.phoenixcontact.com/us/products/2904614
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail
mounting, input: 1-phase, output: 24 V DC / 2.5 A
Oct 27, 2022, 7:32 AM
Page 11 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
DIN rail bus connectors
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
https://www.phoenixcontact.com/us/products/2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Goldplated contacts, 5-pos.
Transparent cover
Transparent cover - MINI MCR DKL - 2308111
https://www.phoenixcontact.com/us/products/2308111
Fold up transparent cover for MINI MCR modules with additional labeling option
using insert strips and flat Zack marker strip 6.2 mm
Oct 27, 2022, 7:32 AM
Page 12 (13)
Temperature measuring transducer - MINI MCR-SLPT100-UI-200-NC
2864370
https://www.phoenixcontact.com/us/products/2864370
Marking label
Marking label - MINI MCR-DKL-LABEL - 2810272
https://www.phoenixcontact.com/us/products/2810272
Label for extended marking of MINI MCR modules in connection with the MINI
MCR-DKL
Phoenix Contact 2022 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Oct 27, 2022, 7:32 AM
Page 13 (13)
