2864406

Extract from the online catalog     MINI MCR-SL-I-I Order No.: 2864406 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864406   MCR 3-way isolating amplifier, for electrical isolation of analog signals, with screw connection, input signal: 0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA   Product notes WEEE/RoHS-compliant since: 11/17/2006 Commercial data EAN 4017918956158 Pack 1 pcs. Customs tariff 85437090 Weight/Piece 0.07252 KG Catalog page information Page 335 (IF-2009) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Product description The 6.2 mm wide standard signal 3-way isolating amplifier MINI MCR-SL-I-I(-SP) is used for electrical isolation, amplification and filtering of standard signals. On the input and output side, the analog standard signals 0...20 mA or 4...20 mA are available, electrically isolated. Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector. PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 6 Mar 25, 2010 MINI MCR-SL-I-I Order No.: 2864406 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864406 Technical data Input data Configurable/programmable No Current input signal 0 mA ... 20 mA 4 mA ... 20 mA Max. input current 50 mA Input resistance current input Approx. 50 Ω Output data Configurable/programmable No Current output signal 0 mA ... 20 mA 4 mA ... 20 mA Max. output current 28 mA Load/output load current output < 500 Ω (at 20 mA) Power supply Nominal supply voltage 24 V DC Range of supply voltages 19.2 V DC ... 30 V DC (to bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715) Max. current consumption < 20 mA Power consumption < 450 mW Connection data Type of connection Screw connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 12 Stripping length 12 mm Screw thread M3 General data No. of channels 1 Width 6.2 mm PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 2 / 6 Mar 25, 2010 MINI MCR-SL-I-I Order No.: 2864406 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864406 Height 93.1 mm Depth 102.5 mm Transmission error, max. ≤ 0.1 % (of end value) Maximum temperature coefficient < 0.01 %/K Temperature coefficient, typical < 0.002 %/K Limit frequency (3 dB) Approx. 100 Hz Step response (10-90%) Approx. 3.2 ms Protective circuitry Transient protection Ambient temperature (operation) -20 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Pollution degree 2 Surge voltage category II Electromagnetic compatibility Conformance with EMC directive 2004/108/EC Emitted interference EN 50081-2 Immunity to interference EN 61000-6-2:2005 Color green Housing material PBT Mounting position Any Assembly instructions The DIN rail bus connector (T-BUS) can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail. Conformity CE compliant ATEX Ex II 3 G Ex nA II T4 X UL, USA / Canada UL 508 Recognized GL GL EMC 2 D Certificates / Approvals Certification CUL, GL, UL Certification Ex: CUL-EX LIS, UL-EX LIS PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 3 / 6 Mar 25, 2010 MINI MCR-SL-I-I Order No.: 2864406 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864406 Accessories Item Designation Description 2869728 ME 6,2 TBUS-2 1,5/5-ST-3,81 GN DIN rail connector (T-BUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rails according to EN 60715 2864134 MINI MCR-SL-PTB MCR power terminal block for supplying several MINI Analog modules via the DIN rail connectors, with screw connection, current consumption up to max. 2 A 2864147 MINI MCR-SL-PTB-SP MCR power terminal block for supplying several MINI-ANALOG modules via the DIN rail connectors, with spring-cage connection, current consumption up to max. 2 A 2866653 MINI-PS-100-240AC/24DC/1.5/ EX DIN rail power supply unit, primary-switched mode, slim design, output: 24 V DC / 1.5 A, ATEX approval 2866983 MINI-SYSPS-100-240AC/24DC/1.5 DIN rail power supply unit, primary-switched mode, slim design, output: 24 V DC / 1.5 A General Diagrams/Drawings Dimensioned drawing Circuit diagram PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 6 Mar 25, 2010 MINI MCR-SL-I-I Order No.: 2864406 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864406 Approbationslogos (EX-Bereich) PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 5 / 6 Mar 25, 2010 MINI MCR-SL-I-I Order No.: 2864406 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2864406 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de © 2010 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 6 / 6 Mar 25, 2010