2864422

https://www.phoenixcontact.com/us/products/2864422 Repeater power supply - MINI MCR-SL-RPS-I-I - 2864422 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR repeater power supplies, screw connection, input signal: (0)4..20 mA, output signal: (0)4..20 mA Product Description The 6.2 mm wide MINI MCR-SL-RPS-I-I... repeater power supply supplies transmitters in the field and electrically isolates the input signal from the output signal. The module can be used in both isolator and repeater power supply operation. Electrically isolated 0...20 mA or 4...20 mA analog standard signals are available on the input and output side. The power supply (19.2 V DC to 30 V DC) can be supplied via connection terminal blocks on the modules or in conjunction with the DIN rail connector. Product Features ■ ■ ■ ■ ■ Power supply possible via the foot element (TBUS) Can be used as an isolator with passive input Highly-compact repeater power supplies for electrical isolation, amplification, and filtering of standard analog signals 3-way isolation Supply of 2-wire and passive 3-wire sensors Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 72.2 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions 04/12/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2864422 Repeater power supply - MINI MCR-SL-RPS-I-I - 2864422 Technical data Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Input data Description of the input Current input (sensor circuit) Number of inputs 1 Current input signal 4 mA ... 20 mA (repeater power supply and isolator operation) 0 mA ... 20 mA (isolator operation) Max. input current 28 mA Input resistance current input approx. 50 Ω Transmitter supply voltage UB - max. 4.5 V for load 0 mA ... 20 mA Transmitter supply voltage range 14.7 V DC ... 25.5 V DC Output data Output name Current output Number of outputs 1 Current output signal 4 mA ... 20 mA (repeater power supply and isolator operation) 0 mA ... 20 mA (isolator operation) Max. output current 28 mA Load/output load current output ≤ 500 Ω (I = 20 mA) Transmission Behavior 1:1 to input signal Power supply Nominal supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Power consumption < 900 mW (at 24 V DC and in repeater power supply operation) < 600 mW (at 24 V DC and in isolator operation) Connection data Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 26 04/12/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/2864422 Repeater power supply - MINI MCR-SL-RPS-I-I - 2864422 Technical data Connection data Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Stripping length 12 mm Screw thread M3 General No. of channels 1 Maximum transmission error ≤ 0.2 % (of final value) Transmission error, typical ≤ 0.1 % (of final value) Maximum temperature coefficient < 0.01 %/K Temperature coefficient, typical < 0.002 %/K Limit frequency (3 dB) approx. 100 Hz Step response (10-90%) approx. 3.5 ms Protective circuit Transient protection Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Degree of pollution 2 Rated insulation voltage 50 V AC/DC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions To bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T5 GL GL EMC 2 D EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 04/12/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2864422 Repeater power supply - MINI MCR-SL-RPS-I-I - 2864422 Technical data EMC data Typical deviation from the measuring range final value 10 % Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 10 % Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 10 % Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 61000-6-4 Connection in acc. with standard CUL Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Basic insulation according to EN 61010 Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T5 GL GL EMC 2 D Classifications eCl@ss eCl@ss 4.0 27210120 eCl@ss 4.1 27210120 eCl@ss 5.0 27210120 eCl@ss 5.1 27210120 eCl@ss 6.0 27210120 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 eCl@ss 9.0 27210120 ETIM ETIM 2.0 EC001485 04/12/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2864422 Repeater power supply - MINI MCR-SL-RPS-I-I - 2864422 Classifications ETIM ETIM 3.0 EC001485 ETIM 4.0 EC001485 ETIM 5.0 EC002653 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals UL Recognized / cUL Recognized / GL / EAC / cULus Recognized Ex Approvals UL Listed / cUL Listed / ATEX / cULus Listed Approvals submitted Approval details UL Recognized  cUL Recognized  GL  EAC  04/12/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2864422 Repeater power supply - MINI MCR-SL-RPS-I-I - 2864422 Approvals cULus Recognized  Drawings Application drawing Application drawing Sensor 4...20mA 1 PWR OUT 2 GND1 3 4 IN I GND1 OUT I 5 1 UB GND2 2 6 Control system UB + GND3 GND1 3 7 GND1 4 8 24V MINI MCR-SL-RPS-I-I IN I PWR OUT OUT I 5 GND2 6 UB + Control system 7 GND3 8 24V MINI MCR-SL-RPS-I-I Mains voltage Mains voltage Repeater power supply operation with a passive sensor Isolator operation with an active sensor Application drawing Block diagram OUT I Actuator OUT IN Sensor / Field 1 – 1 IN I 2 IN I PWR OUT OUT I PWR 2 IN 5 GND2 UB Control system 4 GND1 GND1 UB + GND3 MINI MCR-SL-RPS-I-I 5 + 5 + 2 PWR OUT passive GND 2 6 6 – OUT I 6 3-wire 3 OUT I active 2-wire 1 PLC / DCS 7 1 PWR 2 IN 3 GND OUT I 8 24V US – 3 – 4 GND 1 +24V GND 1 7 + GND 3 8 – 1 4-wire GND 3 +24V GND 3 Mains voltage Zone 2 Div. 2 Isolator operation at the analog output module 04/12/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2864422 Repeater power supply - MINI MCR-SL-RPS-I-I - 2864422 Dimensional drawing 6,2 102,5 93,1 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/12/2016   Page 7 / 7