https://www.phoenixcontact.com/us/products/2864480
Limit value switches - MINI MCR-SL-UI-REL - 2864480
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
MCR limit value switch, with adjustable hysteresis and delay time, with screw connection
Product Description
The 6.2 mm wide configurable 3-way threshold value switch MINI MCR-SL-UI-REL... is used to control and monitor analog standard signals.
On the input side, the analog standards signals 0...20 mA or 0...10 V per DIP switch can be set. On the output side, a relay with PDT contact is
available. The switching thresholds are set via potentiometer.
The DIP switches located on the side of the housing have the following functions:
- Configuration of the switching hysteresis,
- Configuration of the operating and closed circuit current behavior,
- Setting of relay pickup times
- Setting of dropout delay
The relay status is indicated by a yellow LED on the front of the housing.
Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.
Your advantages
Power supply possible via the foot element (TBUS)
Highly-compact threshold value switch for switching analog limit values
Status and error indication via two diagnostic LEDs
Operating current/closed circuit current switch-over
PDT relay at output
Limit value can be freely adjusted via potentiometer on the front
Input signal, hysteresis, and delay time can be configured via DIP switches
3-way isolation
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4017918974879
12/22/2019 Page 1 / 10
https://www.phoenixcontact.com/us/products/2864480
Limit value switches - MINI MCR-SL-UI-REL - 2864480
Weight per Piece (excluding packing)
85.000 g
Custom tariff number
85437090
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
6.2 mm
Height
93.1 mm
Depth
101.2 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 65 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Input data
Number of inputs
1
Voltage input signal
0 V ... 10 V
Current input signal
0 mA ... 20 mA
max. input voltage
30 V
Max. input current
100 mA
Input resistance of voltage input
> 100 kΩ
Input resistance current input
50 Ω
Output data
Number of outputs
1
Switching output
Output name
Relay output
Contact type
1 PDT
Contact material
AgSnO2, hard gold-plated
Maximum switching voltage
250 V AC
240 V AC (UL)
Limiting continuous current
2A
Setting range of the response delay
0 s ... 10 s (0 s; 1 s; 2 s; 3 s; 4 s; 6 s; 8 s; 10 s)
Internal hysteresis
0.1 %; 1 %; 2.5 %; 5 %
Power supply
12/22/2019 Page 2 / 10
https://www.phoenixcontact.com/us/products/2864480
Limit value switches - MINI MCR-SL-UI-REL - 2864480
Technical data
Power supply
Nominal supply voltage
24 V DC ±15 %
Supply voltage range
19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply
voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Max. current consumption
< 14 mA (at 24 V DC)
Power consumption
< 330 mW (at 24 V DC)
Connection data
Connection method
Screw connection
Stripping length
12 mm
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 12
General
No. of channels
1
Maximum temperature coefficient
< 0.02 %/K
Switching point accuracy
< 0.05 %
Electrical isolation
Basic insulation according to EN 61010
Overvoltage category
II
Degree of pollution
2
Rated insulation voltage
50 V AC/DC
Test voltage input/power supply
1.5 kV AC (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Color
green
Housing material
PBT
Mounting position
any
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail according to EN 60715.
Conformance
CE-compliant
ATEX
II 3 G Ex nA nC IIC T4 Gc X
UL, USA
Class I, Zone 2, AEx nA nC IIC T5
UL, USA/Canada
UL 508 Recognized
UL, Canada
Class I, Zone 2, Ex nA nC IIC T5 Gc
GL
GL EMC 2 D
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
12/22/2019 Page 3 / 10
https://www.phoenixcontact.com/us/products/2864480
Limit value switches - MINI MCR-SL-UI-REL - 2864480
Technical data
General
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
EMC data
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Typical deviation from the measuring range final value
5%
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Typical deviation from the measuring range final value
5%
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Typical deviation from the measuring range final value
5%
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Connection in acc. with standard
CUL
Standards/regulations
EN 61000-4-2
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Electrical isolation
Basic insulation according to EN 61010
Conformance
CE-compliant
ATEX
II 3 G Ex nA nC IIC T4 Gc X
UL, USA
Class I, Zone 2, AEx nA nC IIC T5
UL, USA/Canada
UL 508 Recognized
UL, Canada
Class I, Zone 2, Ex nA nC IIC T5 Gc
GL
GL EMC 2 D
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50
12/22/2019 Page 4 / 10
https://www.phoenixcontact.com/us/products/2864480
Limit value switches - MINI MCR-SL-UI-REL - 2864480
Technical data
Environmental Product Compliance
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Block diagram
12/22/2019 Page 5 / 10
https://www.phoenixcontact.com/us/products/2864480
Limit value switches - MINI MCR-SL-UI-REL - 2864480
Dimensional drawing
Classifications
eCl@ss
eCl@ss 4.0
27210100
eCl@ss 4.1
27210100
eCl@ss 5.0
27210100
eCl@ss 5.1
27210100
eCl@ss 6.0
27210100
eCl@ss 7.0
27210122
eCl@ss 8.0
27210122
eCl@ss 9.0
27210122
ETIM
ETIM 4.0
EC002654
ETIM 5.0
EC002654
12/22/2019 Page 6 / 10
https://www.phoenixcontact.com/us/products/2864480
Limit value switches - MINI MCR-SL-UI-REL - 2864480
Classifications
ETIM
ETIM 6.0
EC002654
ETIM 7.0
EC002654
UNSPSC
UNSPSC 6.01
30211506
UNSPSC 7.0901
39121008
UNSPSC 11
39121008
UNSPSC 12.01
39121008
UNSPSC 13.2
39121008
UNSPSC 18.0
39121008
UNSPSC 19.0
39121008
UNSPSC 20.0
39121008
UNSPSC 21.0
39121008
Approvals
Approvals
Approvals
GL / UL Recognized / cUL Recognized / cULus Recognized
Ex Approvals
ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed
Approval details
GL
https://approvalfinder.dnvgl.com/
24917-05 HH
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
12/22/2019 Page 7 / 10
https://www.phoenixcontact.com/us/products/2864480
Limit value switches - MINI MCR-SL-UI-REL - 2864480
Approvals
cULus Recognized
Accessories
Accessories
DIN rail connector
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Marking material
Transparent cover - MINI MCR DKL - 2308111
Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker
strip 6.2 mm
Marking label - MINI MCR-DKL-LABEL - 2810272
Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL
Power module
12/22/2019 Page 8 / 10
https://www.phoenixcontact.com/us/products/2864480
Limit value switches - MINI MCR-SL-UI-REL - 2864480
Accessories
Power terminal block - MINI MCR-SL-PTB - 2864134
MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with screw connection,
maximum current consumption of up to 2 A
Power terminal block - MINI MCR-SL-PTB-SP - 2864147
MCR feed-in terminal for supplying several MINI Analog modules via a DIN rail connector, with spring-cage connection,
maximum current consumption of up to 2 A. Replacement part: 2902067 MINI MCR-2-PTB-PT.
Power supply
Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983
Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653
Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the
potentially explosive area
System adapter
System adapter - MINI MCR-SL-V8-FLK 16-A - 2811268
Eight MINI analog signal converters with screw connection method can be connected to a control system using a system
adapter and system cabling with a minimum of wiring and very low error risk.
12/22/2019 Page 9 / 10
https://www.phoenixcontact.com/us/products/2864480
Limit value switches - MINI MCR-SL-UI-REL - 2864480
Accessories
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
12/22/2019 Page 10 / 10
