2864493

https://www.phoenixcontact.com/us/products/2864493 Limit value switches - MINI MCR-SL-UI-REL-SP - 2864493 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR threshold value switch, with adjustable hysteresis and delay time, with spring-cage connection. Replacement part: 2902035 MINI MCR-2-UI-REL-PT. Your advantages  Power supply possible via the foot element (TBUS)  Highly-compact threshold value switch for switching analog limit values  Status and error indication via two diagnostic LEDs  PDT relay at output  3-way isolation  Limit value can be freely adjusted via potentiometer on the front  Input signal, hysteresis, and delay time can be configured via DIP switches  Operating current/closed circuit current switch-over Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918974886 Weight per Piece (excluding packing) 63.000 g Custom tariff number 85437090 Country of origin Germany Technical data Dimensions Width 6.2 mm Height 93.1 mm 07/04/2020   Page 1 / 8 https://www.phoenixcontact.com/us/products/2864493 Limit value switches - MINI MCR-SL-UI-REL-SP - 2864493 Technical data Dimensions Depth 102.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Input data Number of inputs 1 Voltage input signal 0 V ... 10 V Current input signal 0 mA ... 20 mA max. input voltage 30 V Max. input current 100 mA Input resistance of voltage input > 100 kΩ Input resistance current input 50 Ω Output data Number of outputs 1 Switching output Output name Relay output Contact type 1 PDT Contact material AgSnO2, hard gold-plated Maximum switching voltage 250 V AC 240 V AC (UL) Limiting continuous current 2A Setting range of the response delay 0 s ... 10 s (0 s; 1 s; 2 s; 3 s; 4 s; 6 s; 8 s; 10 s) Internal hysteresis 0.1 %; 1 %; 2.5 %; 5 % Power supply Nominal supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Max. current consumption < 14 mA (at 24 V DC) Power consumption < 330 mW (at 24 V DC) Connection data Connection method Spring-cage connection Stripping length 8 mm 07/04/2020   Page 2 / 8 https://www.phoenixcontact.com/us/products/2864493 Limit value switches - MINI MCR-SL-UI-REL-SP - 2864493 Technical data Connection data Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 12 General No. of channels 1 Maximum temperature coefficient < 0.02 %/K Switching point accuracy < 0.05 % Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Degree of pollution 2 Rated insulation voltage 50 V AC/DC Test voltage input/power supply 1.5 kV AC (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 5% Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 5% Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 5% Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 07/04/2020   Page 3 / 8 https://www.phoenixcontact.com/us/products/2864493 Limit value switches - MINI MCR-SL-UI-REL-SP - 2864493 Technical data Standards and Regulations Connection in acc. with standard CUL Standards/regulations EN 61000-4-2 Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Basic insulation according to EN 61010 Conformance CE-compliant ATEX  II 3 G Ex nA nC IIC T4 Gc X UL, USA Class I, Zone 2, AEx nA nC IIC T5 UL, USA/Canada UL 508 Recognized UL, Canada Class I, Zone 2, Ex nA nC IIC T5 Gc GL GL EMC 2 D Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 07/04/2020   Page 4 / 8 https://www.phoenixcontact.com/us/products/2864493 Limit value switches - MINI MCR-SL-UI-REL-SP - 2864493 Block diagram 07/04/2020   Page 5 / 8 https://www.phoenixcontact.com/us/products/2864493 Limit value switches - MINI MCR-SL-UI-REL-SP - 2864493 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27210100 eCl@ss 4.1 27210100 eCl@ss 5.0 27210100 eCl@ss 5.1 27210100 eCl@ss 6.0 27210100 eCl@ss 7.0 27210122 eCl@ss 8.0 27210122 eCl@ss 9.0 27210122 ETIM ETIM 4.0 EC002654 ETIM 5.0 EC002654 07/04/2020   Page 6 / 8 https://www.phoenixcontact.com/us/products/2864493 Limit value switches - MINI MCR-SL-UI-REL-SP - 2864493 Classifications ETIM ETIM 6.0 EC002654 ETIM 7.0 EC002654 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Accessories Accessories DIN rail connector DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Marking material Transparent cover - MINI MCR DKL - 2308111 Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm     Marking label - MINI MCR-DKL-LABEL - 2810272 Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL     Power module 07/04/2020   Page 7 / 8 https://www.phoenixcontact.com/us/products/2864493 Limit value switches - MINI MCR-SL-UI-REL-SP - 2864493 Accessories Power terminal block - MINI MCR-SL-PTB - 2864134 MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with screw connection, maximum current consumption of up to 2 A     Power terminal block - MINI MCR-SL-PTB-SP - 2864147 MCR feed-in terminal for supplying several MINI Analog modules via a DIN rail connector, with spring-cage connection, maximum current consumption of up to 2 A. Replacement part: 2902067 MINI MCR-2-PTB-PT.     Power supply Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983 Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A     Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653 Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the potentially explosive area     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 07/04/2020   Page 8 / 8