2864574

https://www.phoenixcontact.com/us/products/2864574 Temperature measuring transducer - MCR-FL-T-LP-I-EX - 2864574 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR head-mounted temperature transducers: Programmable loop-powered temperature transducers. Resistance thermometers, thermocouples, resistance-type sensors and voltage sensors. Product Features ■ ■ ■ ■ ■ ■ ■ ■ Input for resistance thermometers, thermocouples, and linear mV signals, Ex ia IIC Configuration via software Can be installed in zone 1 2-way electrical isolation Single-channel Loop-powered HART-compatible (MCR-FL-TS-LP-I-EX) 4 20 mA/20 4 mA output Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 106.6 g Custom tariff number 85437090 Country of origin Germany Technical data Dimensions Width 12.5 mm Height 99 mm Depth 114.5 mm 04/08/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2864574 Temperature measuring transducer - MCR-FL-T-LP-I-EX - 2864574 Technical data Ambient conditions Degree of protection IP20 Input data Configurable/programmable Yes, programmable Sensor types (RTD) that can be used Pt, Ni (100, 500, 1000); min. measurement range 10 K Sensor types that can be used (TC) B, C, D, E, J, K, L, N, R, S, T, U; min. measurement range 50 K/500 K Connection method 2, 3, 4-wire Input signal range 10 Ω ... 400 Ω (min. measurement range 10 Ω) 10 Ω ... 2000 Ω (min. measurement range 100 Ω) -10 mV ... 100 mV (min. measurement range 5 mV) Output data Signal output Current output Current output signal 4 mA ... 20 mA 20 mA ... 4 mA Max. current output signal ≤ 23 mA Output current with short-circuit ≤ 3.6 mA or ≥ 21 mA (adjustable, not for thermocouples) Output current with wire break ≤ 3.6 mA or ≥ 21 mA (adjustable) Output current range with overrange/underrange 3.8 mA ... 20.5 mA Load/output load current output ≤ 520 Ω (At UV = 24 V; Usupply - 12 V / 0.023 A) Power supply Designation Loop-powered Supply voltage range 12 V DC ... 30 V DC Max. current consumption < 3.5 mA Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 8 mm Screw thread M3 Connection method Screw connection Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm General 04/08/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2864574 Temperature measuring transducer - MCR-FL-T-LP-I-EX - 2864574 Technical data General Step response (10-90%)