Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user
documentation. Our General Terms of Use for Downloads are valid.
MCR repeater power supply, with spring-cage connection, input signal: (0)4...20 mA, output
signal: (0)4...20 mA. Replacement part: 2902015 MINI MCR-2-RPSS-I-I-PT.
Your advantages
• Power supply possible via the foot element (TBUS)
• Can be used as an isolator with passive input
• 3-way isolation
• Supply of 2-conductor and passive 3-conductor sensors
• Highly-compact repeater power supplies for electrical isolation, amplification, and filtering of standard analog signals
Commercial Data
Item number
2864752
Packing unit
1 pc
Minimum order quantity
1 pc
Note
Made to Order (non-returnable)
Sales Key
C01
Product Key
CK1211
Catalog Page
Page 99 (C-7-2015)
GTIN
4017918974954
Weight per Piece (including packing)
82.18 g
Weight per Piece (excluding packing)
79.4 g
Customs tariff number
85437090
Country of origin
DE
Oct 27, 2022, 7:17 PM
Page 1 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Technical Data
Product properties
Product type
Repeater power supplies
No. of channels
1
Insulation characteristics
Overvoltage category
II
Pollution degree
2
Electrical properties
No. of channels
1
Rated insulation voltage
50 V AC/DC
Electrical isolation
Basic insulation in accordance with EN 61010
Electrical isolation between input and output
yes
Limit frequency (3 dB)
approx. 100 Hz
Maximum power dissipation for nominal condition
508 mW (24 V DC)
208 mW (24 V DC)
Test voltage, input/output/supply
1.5 kV AC (50 Hz, 60 s)
Protective circuit
Transient protection
Signal transmission behavior
In = Out
Step response (10-90%)
approx. 3.5 ms
Maximum temperature coefficient
< 0.01 %/K
Temperature coefficient, typical
< 0.002 %/K
Maximum transmission error
≤ 0.2 % (of final value)
Transmission error, typical
≤ 0.1 % (of final value)
Supply
Nominal supply voltage
24 V DC
Supply voltage range
19.2 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the
supply voltage. It can be snapped onto a 35 mm DIN rail in
accordance with EN 60715)
Power consumption
< 900 mW (at 24 V DC and in repeater power supply operation)
< 600 mW (at 24 V DC and in isolator operation)
Input data
Signal:
Description of the input
Current input (sensor circuit)
Number of inputs
1
Current input signal
4 mA ... 20 mA (repeater power supply and isolator operation)
0 mA ... 20 mA (isolator operation)
Max. current input signal
28 mA
Input resistance current input
approx. 50 Ω
Transmitter supply voltage
UB - max. 4.5 V for load 0 mA ... 20 mA
Oct 27, 2022, 7:17 PM
Page 2 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Transmitter supply voltage range
14.7 V DC ... 25.5 V DC
Output data
Signal: Current
Number of outputs
1
Non-load voltage
approx. 12.5 V
Current output signal
0 mA ... 20 mA (isolator operation)
4 mA ... 20 mA (repeater power supply and isolator operation)
Max. current output signal
28 mA
Load/output load current output
≤ 500 Ω (I = 20 mA)
Ripple
< 20 mVrms (at 500 Ω)
Connection data
Connection method
Spring-cage connection
Stripping length
8 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 12
Interfaces
Data communication (bypass)
HART function
no
Dimensions
Dimensional drawing
Width
6.2 mm
Height
93.1 mm
Depth
102.5 mm
Material specifications
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Housing material
PBT
Environmental and real-life conditions
Ambient conditions
Oct 27, 2022, 7:17 PM
Page 3 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Degree of protection
IP20
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Approval data
CE
Certificate
CE-compliant
ATEX
Identification
II 3 G Ex nA IIC T4 Gc X
UL, USA / Canada
Identification
UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T5
GL
Identification
GL EMC 2 D
EMC data
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 50081-2
Noise immunity
EN 61000-6-2
Note
When being exposed to interference, there may be minimal
deviations.
Electrostatic discharge
Standards/regulations
EN 61000-4-2
Electrostatic discharge
Comments
Safety measures must be taken to prevent electrostatic
discharge.
Electromagnetic HF field
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Typical deviation from the measuring range final value
10 %
Fast transients (burst)
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Typical deviation from the measuring range final value
10 %
Surge current load (surge)
Standards/regulations
EN 61000-4-5
Surge current load (surge)
Comments
Criterion B
Conducted interference
Oct 27, 2022, 7:17 PM
Page 4 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Typical deviation from the measuring range final value
10 %
Standards and regulations
Electrical isolation
Basic insulation in accordance with EN 61010
Mounting
Mounting type
DIN rail mounting
Assembly instructions
The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item
no. 2869728) can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail in accordance with EN 60715.
Mounting position
any
Oct 27, 2022, 7:17 PM
Page 5 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Drawings
Application drawing
Sensor
1
UB
2
3
4
IN I
PWR OUT
GND1
GND1
OUT I
5
GND2
6
UB +
GND3
MINI MCR-SL-RPS-I-I
Control system
7
8
24V
Mains voltage
Isolator operation with an active sensor
Oct 27, 2022, 7:17 PM
Page 6 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Application drawing
Actuator
1
2
3
Control system
4
IN I
PWR OUT
GND1
GND1
OUT I
5
GND2
UB
6
UB +
GND3
MINI MCR-SL-RPS-I-I
7
8
24V
Mains voltage
Isolator operation at the analog output module
Oct 27, 2022, 7:17 PM
Page 7 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Block diagram
IN
Sensor / Field
OUT I
2-wire
1
3-wire
–
PWR
2
IN
OUT I
1
PWR
2
IN
3
GND
OUT I
US 4-wire
GND
1
3
OUT
2
+
–
–
4
3
1
IN I
PWR OUT
GND 1
OUT I
active
GND 2
PLC / DCS
5
6
+24V
GND 1
5
+
GND 3
passive
6
–
7
+
8
–
+24V
GND 3
Oct 27, 2022, 7:17 PM
Page 8 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Application drawing
4...20mA
1
2
3
4
IN I
PWR OUT
GND1
GND1
OUT I
5
GND2
6
UB +
GND3
MINI MCR-SL-RPS-I-I
Control system
7
8
24V
Mains voltage
Repeater power supply operation with a passive sensor
Oct 27, 2022, 7:17 PM
Page 9 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Dimensional drawing
6,2
102,5
93,1
Oct 27, 2022, 7:17 PM
Page 10 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Classifications
ECLASS
ECLASS-9.0
27210120
ECLASS-10.0.1
27210120
ECLASS-11.0
27210120
ETIM
ETIM 7.0
EC002653
Oct 27, 2022, 7:17 PM
Page 11 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Oct 27, 2022, 7:17 PM
Page 12 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Accessories
DIN rail bus connectors
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
https://www.phoenixcontact.com/us/products/2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Goldplated contacts, 5-pos.
Power terminal block
Power terminal block - MINI MCR-SL-PTB - 2864134
https://www.phoenixcontact.com/us/products/2864134
MCR power terminal block for supplying several MINI Analog modules via the
DIN rail connector, with screw connection, maximum current consumption of up
to 2 A
Oct 27, 2022, 7:17 PM
Page 13 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Power supply unit
Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983
https://www.phoenixcontact.com/us/products/2866983
Please use the following item in new systems: 2904614
Primary-switched MINI POWER power supply for DIN rail mounting, input: 1phase, output: 24 V DC/1.5 A
Transparent cover
Transparent cover - MINI MCR DKL - 2308111
https://www.phoenixcontact.com/us/products/2308111
Fold up transparent cover for MINI MCR modules with additional labeling option
using insert strips and flat Zack marker strip 6.2 mm
Oct 27, 2022, 7:17 PM
Page 14 (15)
Repeater power supply - MINI MCR-SL-RPS-I-I-SP
2864752
https://www.phoenixcontact.com/us/products/2864752
Marking label
Marking label - MINI MCR-DKL-LABEL - 2810272
https://www.phoenixcontact.com/us/products/2810272
Label for extended marking of MINI MCR modules in connection with the MINI
MCR-DKL
Phoenix Contact 2022 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Oct 27, 2022, 7:17 PM
Page 15 (15)
