2864781

Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP 2864781 https://www.phoenixcontact.com/us/products/2864781 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. MCR passive isolator, two-channel, for electrical isolation of current signals without supply voltage, with spring-cage connection. Replacement item: 2864655 MINI MCR-SL-2CP-I-I Your advantages • Voltage drop at isolating amplifier of just 1.7 V • Does not require additional auxiliary voltage • Two channels on a design width of just 6.2 mm • Highly compact 2-conductor passive isolators for the electrical isolation and filtering of standard analog signals • Supplied by an input loop Commercial Data Item number 2864781 Packing unit 1 pc Minimum order quantity 1 pc Note Made to Order (non-returnable) Sales Key C01 Product Key CK1213 Catalog Page Page 101 (C-7-2015) GTIN 4017918974961 Weight per Piece (including packing) 80.625 g Weight per Piece (excluding packing) 65.4 g Customs tariff number 85437090 Country of origin DE Oct 27, 2022, 7:26 AM Page 1 (10) Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP 2864781 https://www.phoenixcontact.com/us/products/2864781 Technical Data Product properties Product type Passive isolators No. of channels 2 Insulation characteristics Overvoltage category II Pollution degree 2 Electrical properties No. of channels 2 Rated insulation voltage 50 V AC/DC Electrical isolation Basic insulation in accordance with EN 61010 Electrical isolation between input and output yes Limit frequency (3 dB) 75 Hz Test voltage input/output 1.5 kV AC (50 Hz, 60 s) Test voltage channel/channel 1.5 kV AC (50 Hz, 60 s) Signal transmission behavior In = Out Step response (10-90%) 5 ms (at 600 Ω load) Maximum temperature coefficient ≤ 0.002 %/K (of measured value / 100 Ω load) Temperature coefficient, typical < 0.002 %/K (of measured value / 100 Ω load) Maximum transmission error ≤ 0.1 % (of final value) Additional error, load-dependent < 0.03 % (of measured value / 100 Ω load) Supply Supply voltage range no separate supply voltage necessary Power consumption 34 mW (per channel) Input data Signal: Description of the input Current input Number of inputs 2 Configurable/programmable no Max. voltage input signal 18 V Current input signal 0 mA ... 20 mA 4 mA ... 20 mA Max. current input signal 40 mA Response current approx. 190 µA Input voltage limitation < 2 V (20 mA) Voltage dissipation 1.9 V (I = 20 mA) Output data Oct 27, 2022, 7:26 AM Page 2 (10) Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP 2864781 https://www.phoenixcontact.com/us/products/2864781 Signal: Current Number of outputs 2 Configurable/programmable no Current output signal 0 mA ... 20 mA 4 mA ... 20 mA Load/output load current output < 600 Ω (at I = 20 mA output signal) Ripple < 10 mVrms (at 600 Ω) Connection data Connection method Spring-cage connection Stripping length 8 mm Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 12 Dimensions Dimensional drawing Width 6.2 mm Height 93.1 mm Depth 102.5 mm Material specifications Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 Housing material PBT Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -20 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Approval data CE Certificate CE-compliant ATEX Oct 27, 2022, 7:26 AM Page 3 (10) Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP 2864781 https://www.phoenixcontact.com/us/products/2864781 Identification II 3 G Ex nA II T6 X UL, USA / Canada Identification UL 508 Recognized Class I, Div. 2, Groups A, B, C, D GL Identification GL EMC 2 D EMC data Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 Note When being exposed to interference, there may be minimal deviations. Electrostatic discharge Standards/regulations EN 61000-4-2 Electrostatic discharge Comments Criterion B Electromagnetic HF field Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Evaluation criterion A Fast transients (burst) Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Evaluation criterion B Surge current load (surge) Standards/regulations EN 61000-4-5 Surge current load (surge) Comments Criterion B Conducted interference Designation Conducted interferences Standards/regulations EN 61000-4-6 Evaluation criterion A Standards and regulations Electrical isolation Basic insulation in accordance with EN 61010 Mounting Mounting type DIN rail mounting Oct 27, 2022, 7:26 AM Page 4 (10) Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP 2864781 https://www.phoenixcontact.com/us/products/2864781 Assembly instructions The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail. Mounting position any Oct 27, 2022, 7:26 AM Page 5 (10) Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP 2864781 https://www.phoenixcontact.com/us/products/2864781 Drawings Block diagram OUT I US 4-wire PWR max. 18VDC GND OUT I US 4-wire PWR max. 18VDC GND OUT IN Sensor / Field 1 + 2 – 3 +3 4 – 4 2 1 IN I 1 GND 1 IN I 2 GND 3 OUT I 1 active PLC / DCS 5 GND 2 5 + 6 OUT I 2 active GND 4 passive 6 – 7 + 8 – 5 passive 6 Oct 27, 2022, 7:26 AM Page 6 (10) Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP 2864781 https://www.phoenixcontact.com/us/products/2864781 Dimensional drawing 93,1 102,5 6,2 Application drawing UB UV = 1,7 V I I UE I I RB MINI MCR-SL-1CP-I-I Oct 27, 2022, 7:26 AM Page 7 (10) Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP 2864781 https://www.phoenixcontact.com/us/products/2864781 Classifications ECLASS ECLASS-9.0 27210120 ECLASS-10.0.1 27210120 ETIM ETIM 7.0 EC002653 Oct 27, 2022, 7:26 AM Page 8 (10) Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP 2864781 https://www.phoenixcontact.com/us/products/2864781 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Oct 27, 2022, 7:26 AM Page 9 (10) Loop-powered isolators - MINI MCR-SL-2CP-I-I-SP 2864781 https://www.phoenixcontact.com/us/products/2864781 Accessories Marking label Marking label - MINI MCR-DKL-LABEL - 2810272 https://www.phoenixcontact.com/us/products/2810272 Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL Transparent cover Transparent cover - MINI MCR DKL - 2308111 https://www.phoenixcontact.com/us/products/2308111 Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Oct 27, 2022, 7:26 AM Page 10 (10)