https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed
in the Ex area. Current limitation at 58 mA. For gases up to Group IIB, loop-powered, electrical isolation, SIL 3.
Screw connection.
Your advantages
Mechanically compatible with the DIN rail connector
Various output characteristic curves compatible with standard solenoid valves
Loop-powered: the required power is supplied via the control signal on the input side.
Installation in zone 2, protection type "n" (EN 60079-15) permitted
Up to SIL 3 according to IEC 61508
2-way electrical isolation
Input 19.2 ... 30 V DC
Output [Ex ia] IIB
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356160575
Weight per Piece (excluding packing)
140.000 g
Custom tariff number
85437090
Country of origin
Germany
Technical data
Note
08/05/2019 Page 1 / 11
https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
12.5 mm
Height
99 mm
Depth
114.5 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 60 °C (any mounting position, pay attention to the derating curve
in the data sheet)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum altitude
≤ 2000 m
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Degree of protection
IP20
Noise immunity
EN 61000-6-2
Output data
Output characteristic curve: Output resistor
133.4 Ω (Internal resistance Ri)
Response time
20 ms
Compatible valves
Note
This is an extract of possible combinations of valves and solenoid drivers.
Compatible valve
ASCO Coil 302 (12 V)
ASCO Coil 302 (24 V)
Bürkert Coil AC 10 standard
Bürkert Coil AC 10 high resistance
FESTO Coil MFH-...IA-SA-EX GBXE022AIAD03
FESTO Coil (J)MFH-...BIA-SA-EX GBXE022AIAD03
Norgren Herion Coil 2050
Norgren Herion Coil 2051
Norgren Herion Coil 2052
Norgren Herion Coil 2053
Parker Coil VZ95 482160.01 EEx ia IIB T6
Power supply
Power dissipation
< 1.325 W
Connection data
Connection method
Screw connection
Stripping length
7 mm
08/05/2019 Page 2 / 11
https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Technical data
Connection data
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 14
Torque
0.5 Nm ... 0.6 Nm
General
No. of channels
1
Maximum temperature coefficient
0.01 %/K
Status display
Yellow LED (switching state / status, lights up when output circuit is active)
Flammability rating according to UL 94
V0
Degree of pollution
2
Overvoltage category
II
Electromagnetic compatibility
Conformance with EMC directive
Interference emission
EN 61000-6-4
Housing material
PA 6.6-FR
Color
gray
Designation
Output/input
Electrical isolation
375 V (Peak value in accordance with EN 60079-11)
300 Vrms (Rated insulation voltage (overvoltage category II; degree of
pollution 2, safe isolation as per EN 61010-1))
2.5 kV (50 Hz, 1 min., test voltage)
Conformance
CE-compliant, additionally EN 61326
ATEX
II (1) G [Ex ia Ga] IIB/IIA
II (1) D [Ex ia Da] IIIC
II 3 (1)G Ex nA [ia IIB Ga] IIC T4 Gc X
IECEx
[Ex ia Ga] IIB/IIA
[Ex ia Da] IIIC
Ex nA [ia IIB Ga] IIC T4 Gc
UL, USA/Canada
Class I Div 2; IS for Class I, II, III Div 1
SIL
3
Safety characteristic data
Integrity requirement
IEC 61508 - Low demand
Equipment type
Type A
Safety Integrity Level (SIL)
3
Safe Failure Fraction (SFF)
100 %
λSU
2.84 x 10 (284 FIT)
-7
08/05/2019 Page 3 / 11
https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Technical data
Safety characteristic data
λSD
0
λDU
0
λDD
0
Probability of a hazardous failure on demand (PFDAVG)
0 (1 year)
0 (5 years)
0 (10 years)
Diagnostic coverage (DC)
DCS=0 %, DCD=0 %
Safety data
Input power Pi
negligible
Max. internal inductance Li
negligible
Max. internal capacitance Ci
negligible
Max. output voltage Uo
25.1 V
Max. output current Io
188 mA
Max. output power Po
1.18 W
Group
IIB
Max. external inductivity Lo
4 mH
Max. external capacity Co
0.83 µF
Group
IIA
Max. external inductivity Lo
7.5 mH
Max. external capacity Co
2.93 µF
Safety-related maximum voltage Um
253 V AC (125 V DC)
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Flammability rating according to UL 94
V0
Conformance
CE-compliant, additionally EN 61326
ATEX
II (1) G [Ex ia Ga] IIB/IIA
II (1) D [Ex ia Da] IIIC
II 3 (1)G Ex nA [ia IIB Ga] IIC T4 Gc X
IECEx
[Ex ia Ga] IIB/IIA
[Ex ia Da] IIIC
Ex nA [ia IIB Ga] IIC T4 Gc
UL, USA/Canada
Class I Div 2; IS for Class I, II, III Div 1
DNV GL-Temperature
B
DNV GL-Humidity
B
DNV GL-Vibration
A
08/05/2019 Page 4 / 11
https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Technical data
Standards and Regulations
DNV GL-EMC
A
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon
installation on board
Group
IIB
IIA
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Classifications
eCl@ss
eCl@ss 4.0
27210120
eCl@ss 4.1
27210120
eCl@ss 5.0
27210120
eCl@ss 5.1
27210120
eCl@ss 6.0
27210120
eCl@ss 7.0
27210120
eCl@ss 8.0
27210120
eCl@ss 9.0
27210120
ETIM
ETIM 4.0
EC002653
ETIM 5.0
EC002653
ETIM 6.0
EC002653
UNSPSC
UNSPSC 6.01
30211506
UNSPSC 7.0901
39121008
UNSPSC 11
39121008
UNSPSC 12.01
39121008
UNSPSC 13.2
39121008
Approvals
Approvals
08/05/2019 Page 5 / 11
https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Approvals
Approvals
UL Listed / cUL Listed / Functional Safety / DNV GL / cULus Listed
Ex Approvals
IECEx / ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 330267
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 330267
16/04-017
R025 V1R1
Functional Safety
DNV GL
https://approvalfinder.dnvgl.com/
TAA000020C
cULus Listed
Accessories
Accessories
Device marking
Plastic label - UC-EMLP (11X9) - 0819291
Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm
08/05/2019 Page 6 / 11
https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Accessories
Plastic label - UC-EMLP (11X9) YE - 0822602
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm
Plastic label - UC-EMLP (11X9) SR - 0828094
Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm
Plastic label - US-EMLP (11X9) - 0828789
Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm
Plastic label - US-EMLP (11X9) YE - 0828871
Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm
Plastic label - US-EMLP (11X9) SR - 0828872
Plastic label, Card, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm
08/05/2019 Page 7 / 11
https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Accessories
Device marker - LS-EMLP (11X9) WH - 0831678
Device marker, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type:
adhesive, lettering field size: 11 x 9 mm
Device marker - LS-EMLP (11X9) YE - 0831732
Device marker, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type:
adhesive, lettering field size: 11 x 9 mm
Device marker - LS-EMLP (11X9) SR - 0831705
Device marker, Sheet, silver, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type:
adhesive, lettering field size: 11 x 9 mm
Insulating sleeve
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
08/05/2019 Page 8 / 11
https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Accessories
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Labeled device marker
08/05/2019 Page 9 / 11
https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Accessories
Plastic label - UC-EMLP (11X9) CUS - 0824547
Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm
Plastic label - UC-EMLP (11X9) YE CUS - 0824548
Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm
Plastic label - UC-EMLP (11X9) SR CUS - 0828098
Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm
Module carrier
Module carrier - TC-D37SUB-ADIO16-EX-P-UNI - 2924854
Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via DSUB connector, 37-pos. (1:1 connection)
Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932
Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via DSUB connector, 37-pos. (1:1 connection), with HART multiplexer connection
08/05/2019 Page 10 / 11
https://www.phoenixcontact.com/us/products/2865515
Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP - 2865515
Accessories
Power module
Power and error message module - MACX MCR-PTB - 2865625
Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN
rail connector
Power and error message module - MACX MCR-PTB-SP - 2924184
Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY
DIN rail connector
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/05/2019 Page 11 / 11
