2865609

https://www.phoenixcontact.com/us/products/2865609 Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP - 2865609 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ex-i solenoid driver. For controlling Ex-i solenoid valves, alarm modules or LEDs installed in Ex areas. Current limitation at 48 mA. For gases up to Group II C, loop-powered, electrical isolation, SIL 3. Product Features ■ ■ ■ ■ ■ ■ ■ ■ Mechanically compatible with the DIN rail connector Various output characteristic curves compatible with standard solenoid valves Loop-powered: the required power is supplied via the control signal on the input side. Installation in zone 2, protection type "n" (EN 60079-15) permitted Up to SIL 3 according to EN 61508 2-way electrical isolation 20 30 V DC input Output [Ex ia] IIC/[Ex ia] IIB Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 140.0 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.5 mm 03/14/2016   Page 1 / 8 https://www.phoenixcontact.com/us/products/2865609 Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP - 2865609 Technical data Dimensions Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position) Ambient temperature (storage/transport) -40 °C ... 80 °C Maximum altitude ≤ 2000 m Permissible humidity (operation) 10 % ... 95 % (non-condensing) Noise immunity EN 61000-6-2 Degree of protection IP20 Output data Output characteristic curve: Output resistor 276 Ω (Internal resistance Ri) Response time 30 ms Compatible valves Note This is an extract of possible combinations of valves and solenoid drivers. Compatible valve ASCO Coil 195 ASCO Coil 302 (12 V) Bürkert Coil AC 10 standard Bürkert Coil AC 10 high resistance Bürkert Coil AC 21 standard 700 mW / 65°C Bürkert Coil AC 21 high resistance 700 mW / 65°C Bürkert Coil AC 21 standard 900 mW / 45°C Bürkert Coil AC 21 high resistance 900 mW / 45°C Bürkert Coil AC 21 standard 900 mW / 60°C Bürkert Coil AC 21 high resistance 900 mW / 60°C Bürkert Coil G1 642735 standard 800 mW / 40°C Bürkert Coil G1 642735 high resistance 800 mW / 40°C Bürkert Coil G1 642735 standard 1000 mW / 40°C Bürkert Coil G1 642735 high resistance 1000 mW / 40°C FESTO Coil MFH-...IA-SA-EX GBXE022AIAD03 FESTO Coil (J)MFH-...BIA-SA-EX GBXE022AIAD03 Norgren Herion Coil 2050 Norgren Herion Coil 2051 Norgren Herion Coil 2052 Norgren Herion Coil 2053 Norgren Herion Coil 2080 / 2082 Norgren Herion Coil 2081 / 2083 03/14/2016   Page 2 / 8 https://www.phoenixcontact.com/us/products/2865609 Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP - 2865609 Technical data Compatible valves Norgren Herion Coil 2084 Norgren Herion Coil 3039 Nass Coil 1259 30.1-00 Nass Coil 1259 50.1-00 Parker Coil VZ07 488650.01 Parker Coil VZ33 494035.10 Parker Coil VZ08 488660.01 Parker Coil VZ09 488670.01 Parker Coil VZ95 482160.01 EEx ia IIB T6 Parker Coil VZ23 482870.01 Samson Coil 3701-12 (12 V) Samson Coil 3701-13 (24 V) Samson Coil 3963-12 (12 V) Samson Coil 3963-13 (24 V) Samson Coil 3964-12 (12 V) Samson Coil 3964-13 (24 V) Seitz Pilot valve PV 12F73 Ci oH Seitz Pilot valve PV 12F73 Xi oH Seitz Pilot valve PV 12F73 Xi oH-2 Seitz Solenoid coil 11 G 52 Power supply Power consumption < 1.4 W Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 7 mm Screw thread M3 Connection method Screw connection Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm General No. of channels 1 03/14/2016   Page 3 / 8 https://www.phoenixcontact.com/us/products/2865609 Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP - 2865609 Technical data General Maximum temperature coefficient 0.01 %/K Status display Yellow LED (switching state / status, lights up when output circuit is active) Flammability rating according to UL 94 V0 Degree of pollution 2 Overvoltage category II Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Emitted interference EN 61000-6-4 Housing material PA 66-FR Color green Designation Output/input Electrical isolation 375 V (Peak value in accordance with EN 60079-11) 300 Vrms (Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1)) 2.5 kV (50 Hz, 1 min., test voltage) Conformance CE-compliant, additionally EN 61326 ATEX  II 3 G Ex nA IIC T4 Gc X  II (1) G [Ex ia Ga] IIC/IIB/IIA  II (1) D [Ex ia Da] IIIC IECEx [Ex ia Ga] IIC/IIB/IIA [Ex ia Da] IIIC Ex nA IIC T4 Gc X UL, USA / Canada Class I Div 2; IS for Class I, II, III Div 1 Functional Safety (SIL) SIL 3 Safety characteristic data Integrity requirement IEC 61508 - Low demand Equipment type Type A Safety Integrity Level (SIL) 3 Safe Failure Fraction (SFF) 100 % λSU 2.84 x 10 (284 FIT) λSD 0 λDU 0 λDD 0 Probability of a hazardous failure on demand (PFDAVG) 0 (1 year) -7 0 (5 years) 0 (10 years) Diagnostic coverage (DC) DCS = 0%, DCD = 0% 03/14/2016   Page 4 / 8 https://www.phoenixcontact.com/us/products/2865609 Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP - 2865609 Technical data Safety data Input power Pi negligible Max. internal inductance Li negligible Max. internal capacitance Ci negligible Max. output voltage Uo 27.7 V Max. output current Io 101 mA Max. output power Po 697 mW Group IIC Max. external inductivity Lo 5.2 mH Max. external capacity Co 0.08 µF Group IIB Max. external inductivity Lo 20 mH Max. external capacity Co 0.66 µF Group IIA Max. external inductivity Lo 42 mH Max. external capacity Co 2.2 µF Safety-related maximum voltage Um 253 V AC (125 V DC) Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 61000-6-4 Flammability rating according to UL 94 V0 Conformance CE-compliant, additionally EN 61326 ATEX  II 3 G Ex nA IIC T4 Gc X  II (1) G [Ex ia Ga] IIC/IIB/IIA  II (1) D [Ex ia Da] IIIC IECEx [Ex ia Ga] IIC/IIB/IIA [Ex ia Da] IIIC Ex nA IIC T4 Gc X UL, USA / Canada Class I Div 2; IS for Class I, II, III Div 1 Group IIC IIB IIA Classifications eCl@ss eCl@ss 4.0 27210121 03/14/2016   Page 5 / 8 https://www.phoenixcontact.com/us/products/2865609 Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP - 2865609 Classifications eCl@ss eCl@ss 4.1 27210121 eCl@ss 5.0 27210121 eCl@ss 5.1 27210121 eCl@ss 6.0 27210121 eCl@ss 7.0 27210121 eCl@ss 8.0 27210121 ETIM ETIM 2.0 EC001430 ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC002653 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals UL Listed / cUL Listed / Functional Safety / EAC / cULus Listed Ex Approvals UL Listed / cUL Listed / ATEX / EAC Ex / ATEX / cULus Listed Approvals submitted Approval details 03/14/2016   Page 6 / 8 https://www.phoenixcontact.com/us/products/2865609 Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP - 2865609 Approvals UL Listed  cUL Listed  Functional Safety  EAC  cULus Listed  Drawings OUT Sensor / Field Diagram IN PLC / DCS DO + + 4.2 - 4.2 4.1 + 4.1 3.2 3.2 - 3.1 3.1 + output voltage UV [V] Block diagram 30 24 V 20 10,5 V 10 4.2 0 4.1 0 10 20 30 40 50 60 output current IV [mA] Zone 0,1,2 Zone 20,21,22 Zone 2 Div. 1,2 Div. 2 03/14/2016   Page 7 / 8 https://www.phoenixcontact.com/us/products/2865609 Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP - 2865609 Dimensional drawing 12,5 7 114,5 99 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/14/2016   Page 8 / 8