2865793

https://www.phoenixcontact.com/us/products/2865793 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP - 2865793 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ex i repeater power supply and input isolating amplifier, HART Sends fed or active 0/4-20 mA signals from the Ex area to a load (active or passive) to the safe area. Electrical 3-way isolation; SIL 2, wide range power supply. Product Features ■ ■ ■ ■ ■ ■ ■ ■ ■ 250 Ω resistor that can be activated via DIP switches to increase HART impedance for low-resistance systems Installation in zone 2, protection type "n" (EN 60079-15) permitted Up to SIL 2 according to EN 61508 Wide-range power supply of 19.2 ... 253 V AC/DC 3-way electrical isolation Plug-in screw or spring-cage connection technology (Push-in technology), with integrated sockets for HART communicators 0/4 ... 20 mA input, [Ex ia] IIC (powered or not powered) Bidirectional transmission of digital HART communication signals 0/4 ... 20 mA output (active or passive), 0/1 ... 5 V, can be selected via DIP switches Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 140.0 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions 05/06/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2865793 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP - 2865793 Technical data Dimensions Width 17.5 mm Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position) Ambient temperature (storage/transport) -40 °C ... 80 °C Maximum altitude ≤ 2000 m Permissible humidity (operation) 10 % ... 95 % (non-condensing) Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Degree of protection IP20 Input data Signal input Active current input, intrinsically safe Current input signal 4 mA ... 20 mA Transmitter supply voltage > 16 V (20 mA) > 15.3 V (22.5 mA) Signal input Passive current input, intrinsically safe Current input signal 0 mA ... 20 mA 4 mA ... 20 mA Voltage drop < 3.5 V (in input isolating amplifier operation) Output data Signal output Current output Voltage output signal 1 V ... 5 V (internal resistance, 250 Ω, 0.1%) Current output signal 4 mA ... 20 mA (active) 4 mA ... 20 mA (14 ... 26 V ext. source voltage) Transmission Behavior 1:1 to input signal Load/output load current output < 600 Ω (20 mA) < 525 Ω (22.5 mA) Output ripple < 20 mVrms Output behavior in the event of an error 0 mA (Cable break in the input) ≥ 22.5 mA (Cable short-circuit in the input) Signal output Current output (active and passive) Voltage output signal 0 V ... 5 V (internal resistance, 250 Ω, 0.1%) Current output signal 0 mA ... 20 mA (active) 4 mA ... 20 mA (active) 0 mA ... 20 mA (14 ... 26 V ext. source voltage) 05/06/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/2865793 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP - 2865793 Technical data Output data 4 mA ... 20 mA (14 ... 26 V ext. source voltage) Load/output load current output < 600 Ω (20 mA) < 525 Ω (22.5 mA) Output ripple < 20 mVrms Output behavior in the event of an error 0 mA (Cable break in the input) 0 mA (Cable short-circuit in the input) Power supply Designation Repeater power supply operation Supply voltage range 24 V ... 230 V AC/DC (-20 %/+10 %, 50/60 Hz) Max. current consumption < 80 mA (24 V DC / 20 mA) Power consumption < 1.6 W (24 V DC/ 20 mA) Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 7 mm Screw thread M3 Connection method Screw connection Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm General No. of channels 1 Maximum transmission error < 0.1 % (of final value) Transmission error, typical < 0.05 % (of final value) Maximum temperature coefficient < 0.01 %/K Step response (10-90%) < 600 µs (for 4 mA ... 20 mA step) Status display Green LED (supply voltage) Flammability rating according to UL 94 V0 Degree of pollution 2 Overvoltage category II Electromagnetic compatibility Conformance with EMC directive Emitted interference EN 61000-6-4 Housing material PA 66-FR 05/06/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2865793 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP - 2865793 Technical data General Color green Designation Input/output/power supply Electrical isolation 300 Vrms (Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1)) 2.5 kV (50 Hz, 1 min., test voltage) Designation Input/output Electrical isolation 375 V (Peak value in accordance with EN 60079-11) Designation Input/power supply Electrical isolation 375 V (Peak value in accordance with EN 60079-11) Conformance CE-compliant, additionally EN 61326 ATEX  II (1) G [Ex ia Ga] IIC/IIB  II (1) D [Ex ia Da] IIIC  II 3(1) G Ex nA [ia Ga] IIC/IIB T4 Gc IECEx [Ex ia Ga] IIC/IIB [Ex ia Da] IIIC Ex nA [ia Ga] IIC/IIB T4 Gc UL, USA / Canada Class I Div 2; IS for Class I, II, III Div 1 Functional Safety (SIL) SIL 2 Data communication (bypass) HART function Yes Protocols supported HART Safety data Operation Repeater power supply operation Max. output voltage Uo 25.2 V Max. output current Io 93 mA Max. output power Po 587 mW Group IIC Max. external inductivity Lo 2 mH Max. external capacity Co 107 nF Group IIB Max. external inductivity Lo 4 mH Max. external capacity Co 820 nF Safety-related maximum voltage Um 253 V AC/DC (Supply terminals) Operation Signal conditioner operation Input voltage Ui ≤ 30 V Input current Ii ≤ 150 mA 05/06/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2865793 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP - 2865793 Technical data Safety data Max. internal inductance Li negligible Max. internal capacitance Ci negligible EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 1% Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 1% Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 1% Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 EN 61000-4-4 Designation Conducted interferences Standards/regulations EN 61000-4-6 Flammability rating according to UL 94 V0 Conformance CE-compliant, additionally EN 61326 ATEX  II (1) G [Ex ia Ga] IIC/IIB  II (1) D [Ex ia Da] IIIC  II 3(1) G Ex nA [ia Ga] IIC/IIB T4 Gc IECEx [Ex ia Ga] IIC/IIB [Ex ia Da] IIIC Ex nA [ia Ga] IIC/IIB T4 Gc UL, USA / Canada Class I Div 2; IS for Class I, II, III Div 1 Group IIC IIB Classifications eCl@ss eCl@ss 4.0 27210121 05/06/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2865793 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP - 2865793 Classifications eCl@ss eCl@ss 4.1 27210121 eCl@ss 5.0 27210121 eCl@ss 5.1 27210121 eCl@ss 6.0 27210121 eCl@ss 7.0 27210121 eCl@ss 8.0 27210120 eCl@ss 9.0 27210120 ETIM ETIM 2.0 EC001431 ETIM 3.0 EC001596 ETIM 4.0 EC001596 ETIM 5.0 EC002653 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals UL Listed / cUL Listed / Functional Safety / EAC / cULus Listed Ex Approvals IECEx / UL Listed / cUL Listed / ATEX / EAC Ex / cULus Listed Approvals submitted GL Approval details 05/06/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2865793 Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP - 2865793 Approvals UL Listed  cUL Listed  Functional Safety  EAC  cULus Listed  Drawings Block diagram OUT IN Sensor / Field Dimensional drawing 116 (SP) 112,5 PLC / DCS AI - 4.2 + 4.1 99 passive 4.3 S2 4.2 250 Ω S1 3.2 3.2 3.1 17,5 + 3.1 250 Ω 4.1 3.3 or + 4.2 3.3 24...230 V – ~ AC/DC - 1.2 1.1 Zone 0,1,2 Zone 20,21,22 Zone 2 Div. 1,2 Div. 2 3.2 + 114,5 active - 4.3 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/06/2016   Page 7 / 7