Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user
documentation. Our General Terms of Use for Downloads are valid.
Repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or
active 0/4 … 20 mA signals to a load (active or passive). 3-way electrical isolation, SIL 2 in
accordance with IEC 61508.
Your advantages
• Power supply possible via DIN rail connector
• Up to SIL 2 in accordance with EN 61508
• Installation in zone 2, protection type "n" (EN 60079-15) permitted
• 3-way electrical isolation
• Terminal point with 250 Ω resistor to increase HART impedance for low-resistance systems
• Plug-in screw or spring-cage connection technology (Push-in technology), with integrated sockets for HART communicators
• Bidirectional transmission of digital HART communication signals
• Output: 0/4 mA ... 20 mA (active or passive)
• Input: 0/4 mA ... 20 mA (powered or not powered)
Commercial Data
Item number
2865955
Packing unit
1 pc
Minimum order quantity
1 pc
Note
Made to Order (non-returnable)
Sales Key
C01
Product Key
CK1111
Catalog Page
Page 120 (C-5-2019)
GTIN
4046356448314
Weight per Piece (including packing)
173.2 g
Weight per Piece (excluding packing)
126 g
Customs tariff number
85437090
Country of origin
DE
Oct 27, 2022, 7:04 PM
Page 1 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Technical Data
Notes
Utilization restriction
EMC note
EMC: class A product, see manufacturer's declaration in the
download area
Product properties
Product type
Repeater power supplies
Application
Analog IN
No. of channels
1
Type
Signal conditioners with SIL functional safety
Insulation characteristics
Overvoltage category
II
Pollution degree
2
Electrical properties
No. of channels
1
Electrical isolation
3-way isolation
Electrical isolation between input and output
yes
Maximum power dissipation for nominal condition
0.65 W (20 mA, 250 Ω)
Signal transmission behavior
In = Out
Step response (10-90%)
< 200 µs (for jump 4 mA ... 20 mA, load 600 Ω)
< 600 µs (for jump 0 mA ... 20 mA, load 600 Ω)
Maximum temperature coefficient
< 0.01 %/K
Maximum transmission error
< 0.1 % (of final value)
Transmission error, typical
< 0.05 % (of final value)
Electrical isolation Input/output/power supply
Rated insulation voltage
300 Vrms
Test voltage
2.5 kV AC (50 Hz, 60 s)
Insulation
Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Input/output
Electrical isolation
375 VPP (Peak value in accordance with IEC/EN 60079-11)
265 V AC/DC (Peak value in accordance with IEC/EN 60079-11)
Electrical isolation Input/power supply
Electrical isolation
375 VPP (Peak value in accordance with IEC/EN 60079-11)
265 V AC/DC (Peak value in accordance with IEC/EN 60079-11)
Electrical isolation Output/supply
Electrical isolation
265 V AC/DC (Peak value in accordance with IEC/EN 60079-7)
Supply
Oct 27, 2022, 7:04 PM
Page 2 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Designation
Repeater power supply operation
Nominal supply voltage
24 V DC
Supply voltage range
19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current consumption
< 76 mA (24 V DC / 20 mA / 1000 Ω)
< 55 mA (24 V DC / 20 mA / 250 Ω)
Power dissipation
< 1.1 W (24 V DC / 20 mA / 1000 Ω)
< 0.95 W (24 V DC / 20 mA / 250 Ω)
< 1.2 W (24 V DC / 20 mA / 0 Ω)
Power consumption
< 1.8 W (20 mA / 1000 Ω)
< 1.3 W (20 mA / 250 Ω)
Supply
Designation
Signal conditioner operation
Nominal supply voltage
24 V DC
Supply voltage range
19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current consumption
< 44 mA (24 V DC / 20 mA / 1000 Ω)
< 27 mA (24 V DC / 20 mA / 250 Ω)
Power dissipation
< 0.75 W (24 V DC / 20 mA / 1000 Ω)
< 0.65 W (24 V DC / 20 mA / 250 Ω)
< 0.95 W (24 V DC / 20 mA / 0 Ω)
Input data
Signal: Repeater power supply operation
Description of the input
Active current input
Number of inputs
1
Input signal
Current
Current input signal
4 mA ... 20 mA
Current limitation
25 mA
Transmitter supply voltage
> 21.5 V (20 mA)
> 20.8 V (24 mA)
Underload/overload signal range
0 mA ... 24 mA (Extended transmission range for diagnostics)
Signal: Signal conditioner operation
Description of the input
Passive current input
Current input signal
0 mA ... 20 mA
4 mA ... 20 mA
Voltage drop
< 3.5 V (in input isolating amplifier operation)
Underload/overload signal range
0 mA ... 24 mA (Extended transmission range for diagnostics)
Output data
Signal: Repeater power supply operation
Output description
Current output (active and passive)
Number of outputs
1
Current output signal
4 mA ... 20 mA (active)
Oct 27, 2022, 7:04 PM
Page 3 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
4 mA ... 20 mA (14 ... 26 V ext. source voltage)
Load/output load current output
< 1000 Ω (20 mA)
< 825 Ω (24 mA)
Output ripple
< 20 mVrms
Output behavior in the event of an error
0 mA (Cable break in the input)
≥ 22.5 mA (Cable short-circuit in the input)
Underload/overload signal range
0 mA ... 24 mA (Extended transmission range for diagnostics)
Signal: Signal conditioner operation
Output description
Current output (active and passive)
Current output signal
0 mA ... 20 mA (active)
4 mA ... 20 mA (active)
0 mA ... 20 mA (14 ... 26 V ext. source voltage)
4 mA ... 20 mA (14 ... 26 V ext. source voltage)
Load/output load current output
< 1000 Ω (20 mA)
< 825 Ω (24 mA)
Output ripple
< 20 mVrms
Output behavior in the event of an error
0 mA (Cable break in the input)
0 mA (Cable short-circuit in the input)
Underload/overload signal range
0 mA ... 24 mA (Extended transmission range for diagnostics)
Connection data
Connection method
Screw connection
Stripping length
7 mm
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 14
Tightening torque
0.5 Nm ... 0.6 Nm
Test socket
Max. diameter
2 mm
Interfaces
Data communication (bypass)
HART function
Yes
Protocols supported
HART-transparent
LED signaling
Status display
Green LED (supply voltage)
Dimensions
Oct 27, 2022, 7:04 PM
Page 4 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Dimensional drawing
Width
12.5 mm
Height
112.5 mm
Depth
113.7 mm
Depth NS 35/7,5
114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with
EN 60715)
Material specifications
Flammability rating according to UL 94
V0 (Housing)
Housing material
PA 6.6-FR
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP20 (not assessed by UL)
Ambient temperature (operation)
-20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Approval data
CE
Certificate
CE-compliant
Note
and EN 61326
ATEX
Identification
Certificate
II 3 G Ex ec IIC T4 Gc
PxCIF08ATEX2865955X
UKCA Ex (UKEX)
Identification
Certificate
II 3 G Ex nA IIC T4 Gc X
PxCIF21UKEX2865955X
IECEx
Identification
Ex ec IIC T4 Gc
Certificate
IECEx BVS 08.0016X
CCC / China-Ex
Identification
Ex nA IIC T4 Gc
Certificate
2022122304115127
UL, USA / Canada
Oct 27, 2022, 7:04 PM
Page 5 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Identification
UL 61010 Listed
UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
Shipbuilding approval
Certificate
DNV GL TAA000020C
Safety Integrity Level (SIL, IEC 61508)
Identification
2
Certificate
BVS PB 03/08-2
EAC Ex
Identification
Certificate
2Ex nA IIC T4 Gc
BY/112 02.01 TP012 103.01 00078
DNV GL data
Temperature
B
Humidity
B
Vibration
A
EMC
A
Enclosure
Required protection according to the Rules shall be provided
upon installation on board
EMC data
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2
Note
When being exposed to interference, there may be minimal
deviations.
Standards and regulations
Electrical isolation
3-way isolation
GB Standard
Standards/regulations
GB 3836.1
GB 3836.8
Mounting
Mounting type
DIN rail mounting
Oct 27, 2022, 7:04 PM
Page 6 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Drawings
Diagram
Approximately
+0.5 mA
Analog
signal
0
Approximately
–0.5 mA
1200 Hz
"1"
2200 Hz
"0"
Signal transmission analog and digital at the same time
Block diagram
IN
OUT
4.2
4.1
5.2
5.1
–
+
–
+
4.2
3.2
4.1
3.1
5.2
5.1
2.2
250
2.1
1.2
1.1
Source
-
+
Sink
+
-
+
GND
+24V
ME 6,2 TBUS-...
Oct 27, 2022, 7:04 PM
Page 7 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Dimensional drawing
116 (SP)
112,5
12,5
7
114,5
99
Oct 27, 2022, 7:04 PM
Page 8 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Block diagram
COMMUNICATION PROTOCOL
IN
Sensor / Field
OUT
PLC / DCS
passive
2-wire
4.2
4.1
+
4.2
3.2
3.2
4.1
3.1
3.1
-
active
+
3.2
+
or
US
4-wire
5.2
5.1
+
2.2
5.2
GND
+24V
Power
GND +24V
-
2.1
250 Ω
5.1
2.2
1.2
1.1
Zone 2
Div. 2
Oct 27, 2022, 7:04 PM
Page 9 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Approvals
DNV GL
UL Listed
cUL Listed
Approval ID: TAA000020C
Approval ID: FILE E 330267
Approval ID: FILE E 330267
Functional Safety
Approval ID: BVS Pb 03/08
CCC
Approval ID: 2022122304115127
EAC Ex
Approval ID: TP012 103.01 00078
ATEX
Approval ID: PxCIF08ATEX2865955X
cUL Listed
UL Listed
Approval ID: FILE E 199827
Approval ID: FILE E 199827
cULus Listed
cULus Listed
Oct 27, 2022, 7:04 PM
Page 10 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Classifications
ECLASS
ECLASS-9.0
27210120
ECLASS-10.0.1
27210120
ECLASS-11.0
27210120
ETIM
ETIM 8.0
EC002653
UNSPSC
UNSPSC 21.0
39121000
Oct 27, 2022, 7:04 PM
Page 11 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Oct 27, 2022, 7:04 PM
Page 12 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Accessories
DIN rail bus connectors
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - 2695439
https://www.phoenixcontact.com/us/products/2695439
DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be
snapped onto NS 35/... DIN rail in accordance with EN 60715
Cable adapter
Cable adapter - GW HART USB MODEM - 1003824
https://www.phoenixcontact.com/us/products/1003824
USB HART modem cable for communication between a PC and HART devices,
cable length: 1m.
Oct 27, 2022, 7:04 PM
Page 13 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Power and error message module
Power and error message module - MACX MCR-PTB - 2865625
https://www.phoenixcontact.com/us/products/2865625
Power and fault signaling module with screw connection, including
corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector
Power and error message module
Power and error message module - MACX MCR-PTB-SP - 2924184
https://www.phoenixcontact.com/us/products/2924184
Power and fault signaling module with Push-in connection, including
corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector
Oct 27, 2022, 7:04 PM
Page 14 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Power supply unit
Power supply unit - QUINT4-SYS-PS/1AC/24DC/2.5/SC - 2904614
https://www.phoenixcontact.com/us/products/2904614
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail
mounting, input: 1-phase, output: 24 V DC / 2.5 A
Module carrier
Module carrier - TC-D37SUB-AIO16-EX-PS-UNI - 2902932
https://www.phoenixcontact.com/us/products/2902932
Universal termination carrier for connecting 16 MACX Analog Ex i signal
conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1
connection), with HART multiplexer connection
Oct 27, 2022, 7:04 PM
Page 15 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Module carrier
Module carrier - TC-D37SUB-ADIO16-EX-P-UNI - 2924854
https://www.phoenixcontact.com/us/products/2924854
Universal termination carrier for connecting 16 MACX Analog Ex i signal
conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1
connection)
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
https://www.phoenixcontact.com/us/products/0201663
Insulating sleeve, color: white
Oct 27, 2022, 7:04 PM
Page 16 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Insulating sleeve
Insulating sleeve - MPS-IH RD - 0201676
https://www.phoenixcontact.com/us/products/0201676
Insulating sleeve, color: red
Insulating sleeve
Insulating sleeve - MPS-IH BU - 0201689
https://www.phoenixcontact.com/us/products/0201689
Insulating sleeve, color: blue
Oct 27, 2022, 7:04 PM
Page 17 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Insulating sleeve
Insulating sleeve - MPS-IH YE - 0201692
https://www.phoenixcontact.com/us/products/0201692
Insulating sleeve, color: yellow
Insulating sleeve
Insulating sleeve - MPS-IH GN - 0201702
https://www.phoenixcontact.com/us/products/0201702
Insulating sleeve, color: green
Oct 27, 2022, 7:04 PM
Page 18 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Insulating sleeve
Insulating sleeve - MPS-IH GY - 0201728
https://www.phoenixcontact.com/us/products/0201728
Insulating sleeve, color: gray
Insulating sleeve
Insulating sleeve - MPS-IH BK - 0201731
https://www.phoenixcontact.com/us/products/0201731
Insulating sleeve, color: black
Oct 27, 2022, 7:04 PM
Page 19 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Test plugs
Test plugs - MPS-MT - 0201744
https://www.phoenixcontact.com/us/products/0201744
Test plugs, with solder connection up to 1 mm2 conductor cross section, color:
gray
Plastic label
Plastic label - UC-EMLP (11X9) - 0819291
https://www.phoenixcontact.com/us/products/0819291
Plastic label, Sheet, white, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK,
CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 10
Oct 27, 2022, 7:04 PM
Page 20 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Plastic label
Plastic label - UC-EMLP (11X9) YE - 0822602
https://www.phoenixcontact.com/us/products/0822602
Plastic label, Sheet, yellow, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK,
CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 10
Plastic label
Plastic label - UC-EMLP (11X9) CUS - 0824547
https://www.phoenixcontact.com/us/products/0824547
Plastic label, can be ordered: by sheet, white, labeled according to customer
specifications, mounting type: adhesive, lettering field size: 11 x 9 mm
Oct 27, 2022, 7:04 PM
Page 21 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Plastic label
Plastic label - UC-EMLP (11X9) YE CUS - 0824548
https://www.phoenixcontact.com/us/products/0824548
Plastic label, can be ordered: by sheet, yellow, labeled according to customer
specifications, mounting type: adhesive, lettering field size: 11 x 9 mm
Plastic label
Plastic label - UC-EMLP (11X9) SR - 0828094
https://www.phoenixcontact.com/us/products/0828094
Plastic label, Sheet, silver, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK,
CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 10
Oct 27, 2022, 7:04 PM
Page 22 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Plastic label
Plastic label - UC-EMLP (11X9) SR CUS - 0828098
https://www.phoenixcontact.com/us/products/0828098
Plastic label, can be ordered: by sheet, silver, labeled according to customer
specifications, mounting type: adhesive, lettering field size: 11 x 9 mm, Number
of individual labels: 10
Plastic label
Plastic label - US-EMLP (11X9) - 0828789
https://www.phoenixcontact.com/us/products/0828789
Plastic label, Card, white, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME,
THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive,
lettering field size: 11 x 9 mm, Number of individual labels: 135
Oct 27, 2022, 7:04 PM
Page 23 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Plastic label
Plastic label - US-EMLP (11X9) YE - 0828871
https://www.phoenixcontact.com/us/products/0828871
Plastic label, Card, yellow, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME,
THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive,
lettering field size: 11 x 9 mm, Number of individual labels: 135
Plastic label
Plastic label - US-EMLP (11X9) SR - 0828872
https://www.phoenixcontact.com/us/products/0828872
Plastic label, Card, silver, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME,
THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive,
lettering field size: 11 x 9 mm, Number of individual labels: 135
Oct 27, 2022, 7:04 PM
Page 24 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Device marker
Device marker - LS-EMLP (11X9) WH - 0831678
https://www.phoenixcontact.com/us/products/0831678
Device marker, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO,
TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 255
Device marker
Device marker - LS-EMLP (11X9) SR - 0831705
https://www.phoenixcontact.com/us/products/0831705
Device marker, Sheet, silver, unlabeled, can be labeled with: TOPMARK NEO,
TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 255
Oct 27, 2022, 7:04 PM
Page 25 (26)
Power/input isolating amplifier - MACX MCR-SLRPSSI-I
2865955
https://www.phoenixcontact.com/us/products/2865955
Device marker
Device marker - LS-EMLP (11X9) YE - 0831732
https://www.phoenixcontact.com/us/products/0831732
Device marker, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO,
TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 255
Phoenix Contact 2022 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Oct 27, 2022, 7:04 PM
Page 26 (26)