https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range
power supply, SIL, screw connection
Why buy this product
250 Ω resistor that can be activated via DIP switches to increase HART impedance for low-resistance systems
Up to SIL 2 according to EN 61508
Installation in zone 2, protection type "n" (EN 60079-15) permitted
0/4 ... 20 mA output (active or passive), 0/1 ... 5 V, can be selected via DIP switches
Wide-range power supply of 19.2 ... 253 V AC/DC
3-way electrical isolation
Plug-in screw or spring-cage connection technology (Push-in technology), with integrated sockets for HART communicators
Bidirectional transmission of digital HART communication signals
0/4 ... 20 mA input (powered or not powered)
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4046356448321
Weight per Piece (excluding packing)
140.000 g
Custom tariff number
85437090
Country of origin
Germany
Technical data
Note
01/11/2018 Page 1 / 11
https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
17.5 mm
Height
112.5 mm
Depth
114.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Maximum altitude
≤ 2000 m
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Noise immunity
EN 61000-6-2
Input data
Signal input
Repeater power supply operation
Current input signal
4 mA ... 20 mA
Transmitter supply voltage
> 16 V (20 mA)
> 15.3 V (22.5 mA)
Signal input
Signal conditioner operation
Current input signal
0 mA ... 20 mA
4 mA ... 20 mA
Voltage drop
< 3.5 V (in input isolating amplifier operation)
Output data
Signal output
Repeater power supply operation
Voltage output signal
1 V ... 5 V (internal resistance, 250 Ω, 0.1%)
Current output signal
4 mA ... 20 mA (active)
4 mA ... 20 mA (14 ... 26 V ext. source voltage)
Transmission Behavior
1:1 to input signal
Load/output load current output
< 600 Ω (20 mA)
< 525 Ω (22.5 mA)
Output ripple
< 20 mVrms
Output behavior in the event of an error
0 mA (Cable break in the input)
≥ 22.5 mA (Cable short-circuit in the input)
Signal output
Signal conditioner operation
Voltage output signal
0 V ... 5 V (internal resistance, 250 Ω, 0.1%)
Current output signal
0 mA ... 20 mA (active)
4 mA ... 20 mA (active)
01/11/2018 Page 2 / 11
https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Technical data
Output data
0 mA ... 20 mA (14 ... 26 V ext. source voltage)
4 mA ... 20 mA (14 ... 26 V ext. source voltage)
Load/output load current output
< 600 Ω (20 mA)
< 525 Ω (22.5 mA)
Output ripple
< 20 mVrms
Output behavior in the event of an error
0 mA (Cable break in the input)
0 mA (Cable short-circuit in the input)
Power supply
Designation
Repeater power supply operation
Nominal supply voltage range
24 V AC/DC ... 230 V AC/DC (50/60 Hz)
Supply voltage range
19.2 V AC/DC ... 253 V AC/DC (24 V AC/DC ... 230 V AC/DC
(-20 % ... +10 %, 50/60 Hz))
Max. current consumption
< 75 mA (24 V DC / 20 mA)
Power consumption
< 1.6 W (24 V DC/ 20 mA)
< 1.9 W
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
14
Stripping length
7 mm
Screw thread
M3
Connection method
Screw connection
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
General
No. of channels
1
Maximum transmission error
< 0.1 % (of final value)
Transmission error, typical
< 0.05 % (of final value)
Maximum temperature coefficient
< 0.01 %/K
Step response (10-90%)
< 600 µs (for 4 mA ... 20 mA step)
Status display
Green LED (supply voltage)
Flammability rating according to UL 94
V0
Degree of pollution
2
01/11/2018 Page 3 / 11
https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Technical data
General
Overvoltage category
II
Electromagnetic compatibility
Conformance with EMC directive
Interference emission
EN 61000-6-4
Housing material
PA 66-FR
Color
green
Designation
Input/output/power supply
Electrical isolation
300 Vrms (Rated insulation voltage (overvoltage category II; degree of
pollution 2, safe isolation as per EN 61010-1))
2.5 kV (50 Hz, 1 min., test voltage)
Conformance
CE-compliant, additionally EN 61326-1
ATEX
II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
UL 508 Listed
UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
Functional Safety (SIL)
SIL 2
Data communication (bypass)
HART function
Yes
Protocols supported
HART
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Flammability rating according to UL 94
V0
Conformance
CE-compliant, additionally EN 61326-1
ATEX
II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
UL 508 Listed
UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
01/11/2018 Page 4 / 11
https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Block diagram
OUT
IN
Sensor / Field
Dimensional drawing
116 (SP)
112,5
PLC / DCS
17,5
99
active
4.3
-
S2
4.2
250 Ω
+
3.2
3.2
+
S1
-
4.1
3.1
3.1
+
250 Ω
4.1
or
US
passive
-
3.2
4.3
114,5
2-wire
4.2
3.3
3.3
4-wire
+
4.2
– 1.2
1.2 ~
Power
–
~
24V ...230V AC/DC
– 1.1
1.1 ~
Zone 2
Div. 2
Connection example
Block diagram
Diagram
IN
Approximately
+0.5 mA
OUT
4.3
-
3.3
Sink
Analog
signal
S2
4.2
4.1
–
+
Source
4.2
4.1
250 W
S1
4.2
–
+
0
+
250 W
3.1
4.3
+
3.2
Approximately
–0.5 mA
1.2
1.1
≃
24 ... 230
V AC/DC
1200 Hz
"1"
2200 Hz
"0"
Signal transmission analog and digital at the same time
Pictogram
POWER
I
I
OUT
IN
POWER
01/11/2018 Page 5 / 11
https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Classifications
eCl@ss
eCl@ss 4.0
27210120
eCl@ss 4.1
27210120
eCl@ss 5.0
27210120
eCl@ss 5.1
27210120
eCl@ss 6.0
27210120
eCl@ss 7.0
27210120
eCl@ss 8.0
27210120
eCl@ss 9.0
27210120
ETIM
ETIM 4.0
EC002653
ETIM 5.0
EC002653
ETIM 6.0
EC002653
UNSPSC
UNSPSC 6.01
30211506
UNSPSC 7.0901
39121008
UNSPSC 11
39121008
UNSPSC 12.01
39121008
UNSPSC 13.2
39121008
Approvals
Approvals
Approvals
Functional Safety / UL Listed / cUL Listed / EAC / cULus Listed
Ex Approvals
ATEX / UL Listed / cUL Listed / cULus Listed
Approval details
Functional Safety
BVS PB 09/08
01/11/2018 Page 6 / 11
https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Approvals
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 330267
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 330267
EAC
EAC-Zulassung
cULus Listed
Accessories
Accessories
Device marking
Plastic label - UC-EMLP (11X9) - 0819291
Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER,
PLOTMARK, mounting type: adhesive, lettering field size: 11 x 9 mm
Plastic label - UC-EMLP (11X9) YE - 0822602
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER,
PLOTMARK, mounting type: adhesive, lettering field size: 11 x 9 mm
01/11/2018 Page 7 / 11
https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Accessories
Plastic label - UC-EMLP (11X9) SR - 0828094
Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER,
PLOTMARK, mounting type: adhesive, lettering field size: 11 x 9 mm
Plastic label - US-EMLP (11X9) - 0828789
Plastic label, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting
type: adhesive, lettering field size: 11 x 9 mm
Plastic label - US-EMLP (11X9) YE - 0828871
Plastic label, Card, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting
type: adhesive, lettering field size: 11 x 9 mm
Plastic label - US-EMLP (11X9) SR - 0828872
Plastic label, Card, silver, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting
type: adhesive, lettering field size: 11 x 9 mm
Device marker - LS-EMLP (11X9) WH - 0831678
Device marker, Sheet, white, unlabeled, can be labeled with: TOPMARK LASER, mounting type: adhesive, lettering field
size: 11 x 9 mm
01/11/2018 Page 8 / 11
https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Accessories
Device marker - LS-EMLP (11X9) YE - 0831732
Device marker, Sheet, yellow, unlabeled, can be labeled with: TOPMARK LASER, mounting type: adhesive, lettering field
size: 11 x 9 mm
Device marker - LS-EMLP (11X9) SR - 0831705
Device marker, Sheet, silver, unlabeled, can be labeled with: TOPMARK LASER, mounting type: adhesive, lettering field
size: 11 x 9 mm
Insulating sleeve
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
01/11/2018 Page 9 / 11
https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Accessories
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Labeled device marker
Plastic label - UC-EMLP (11X9) CUS - 0824547
Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm
01/11/2018 Page 10 / 11
https://www.phoenixcontact.com/us/products/2865968
Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968
Accessories
Plastic label - UC-EMLP (11X9) YE CUS - 0824548
Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm
Plastic label - UC-EMLP (11X9) SR CUS - 0828098
Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: silver
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
01/11/2018 Page 11 / 11
