2866035

https://www.phoenixcontact.com/us/products/2866035 Monitoring relay - EMD-SL-V-UV-300 - 2866035 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Monitoring relay for monitoring 1-phase voltages of 0...300 V AC/DC, undervoltage, supply voltage can be selected using power module, 1 PDT Product Description Increasingly higher demands are being placed on safety and system availability – across all sectors. Processes are becoming more and more complex, not only in mechanical engineering and the chemical industry, but also in plant and automation technology. Demands on power engineering are also increasing constantly. Error-free and therefore cost-effective operation can only be achieved through continuous monitoring of important network and system parameters. Electronic monitoring relays in the EMD series are available for a wide range of monitoring tasks to avoid the consequences of errors or to keep them within limits. The operating states are indicated using colored LEDs, errors that may occur can be sent to a control system via a floating contact or can shut down a part of the system. Some device versions are equipped with startup and response delays in order to briefly tolerate measured values outside the set monitoring range. Product Features ■ ■ ■ Adjustable via potentiometer on the front Variable supply voltage range Separately adjustable startup and response delays Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 133.2 g Custom tariff number 85364900 Country of origin Austria Technical data Dimensions Width 22.5 mm Height 90 mm Depth 113 mm 05/03/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2866035 Monitoring relay - EMD-SL-V-UV-300 - 2866035 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C -25 °C ... 40 °C (corresponds to UL 508) Ambient temperature (storage/transport) -25 °C ... 70 °C Input data Input voltage range 0 V ... 30 V AC/DC (connection terminal blocks: U1 and GND) 0 V ... 60 V AC/DC (connection terminal blocks: U2 and GND) 0 V ... 300 V AC/DC (connection terminal blocks: U3 and GND) Maximum temperature coefficient < 0.1 %/K Function Undervoltage Min. setting range 5 % ... 95 % (From UN) Max. setting range 10 % ... 100 % (From UN) Setting range for response delay 0.2 s ... 10 s Basic accuracy ± 5 % (of scale end value) Setting accuracy ≤ 5 % (of scale end value) Repeat accuracy ≤2% Recovery time 500 ms Contact side Contact type 1 floating PDT Maximum switching voltage 250 V AC (in acc. with IEC 60664-1) Interrupting rating (ohmic load) max. 750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing) 1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing) Output fuse 5 A (fast-blow) Power supply Supply voltage range 24 V AC ... 230 V AC (see Power modules) 24 V DC (see Power modules) General Mechanical service life Approx. 2 x 10 cycles Operating mode 100% operating factor Mounting position any Assembly instructions on standard DIN rail NS 35 in accordance with EN 60715 Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Overvoltage category III, basic insulation (as per EN 50178) Housing insulation material Polyamide PA, self-extinguishing Color green Rated insulation voltage 300 V (According to EN 50178) 7 05/03/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2866035 Monitoring relay - EMD-SL-V-UV-300 - 2866035 Technical data General Conformance CE-compliant UL, USA / Canada UL/C-UL listed UL 508 Connection data Conductor cross section flexible min. 0.25 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 14 Stripping length 8 mm Connection method Screw connection Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 61000-6-3 Noise immunity EN 61000-6-2 Low Voltage Directive Conformance with LV directive 2006/95/EC Conformance CE-compliant UL, USA / Canada UL/C-UL listed UL 508 Classifications eCl@ss eCl@ss 4.0 27371105 eCl@ss 4.1 27371105 eCl@ss 5.0 27371801 eCl@ss 5.1 27371801 eCl@ss 6.0 27371801 eCl@ss 7.0 27371801 eCl@ss 8.0 27371801 ETIM ETIM 2.0 EC001438 ETIM 3.0 EC001438 ETIM 4.0 EC001438 ETIM 5.0 EC001438 05/03/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2866035 Monitoring relay - EMD-SL-V-UV-300 - 2866035 Classifications UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121535 UNSPSC 11 39121535 UNSPSC 12.01 39121535 UNSPSC 13.2 39121535 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / EAC / cULus Listed Ex Approvals Approvals submitted Approval details UL Listed  cUL Listed  EAC  EAC  cULus Listed  05/03/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2866035 Monitoring relay - EMD-SL-V-UV-300 - 2866035 Drawings Block diagram 16 18 U1 30 V U2 60 V U3 300 V 15 GND A1 A2 POWER MODULE U = 24 V DC 24...230 V AC Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/03/2016   Page 5 / 5