2866116

EMD-SL-PS… Plug-In Power Modules for Monitoring and Timer Relays AUTOMATION Data Sheet 103221_en_00 1 © PHOENIX CONTACT - 11/2007 Description Plug-in power modules are used to adjust the supply voltage for monitoring and timer relays in the EMD/ETD series with housing widths of 22.5 mm or 45 mm. 35 35 Dimensions 32 16 32 26 5 Figure 1 EMD-SL-PS... dimensions (in mm) 5 Figure 2 Make sure you always use the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. This data sheet is valid for all products listed on the following page: EMD-SL-PS45... dimensions (in mm) EMD-SL-PS… 2 Ordering Data Plug-In Power Modules for a Housing Width of 22.5 mm Description Type Order No. 20 V DC ... 30 V DC supply voltage EMD-SL-PS-24DC 2885539 1 20.2 V AC ... 26.4 V AC supply voltage EMD-SL-PS-24AC 2866103 1 Pcs./Pck. 88 V AC ... 121 V AC supply voltage EMD-SL-PS-110AC 2866116 1 108 V AC ... 132 V AC supply voltage EMD-SL-PS-120AC 2885731 1 195 V AC ... 264 V AC supply voltage EMD-SL-PS-230AC 2866129 1 Plug-In Power Modules for a Housing Width of 45 mm Description Type Order No. Pcs./Pck. 88 V AC ... 121 V AC supply voltage EMD-SL-PS45-110AC 2885281 1 108 V AC ... 132 V AC supply voltage EMD-SL-PS45-120AC 2885744 1 195 V AC ... 264 V AC supply voltage EMD-SL-PS45-230AC 2885294 1 340 V AC ... 440 V AC supply voltage EMD-SL-PS45-400AC 2885304 1 425 V AC ... 550 V AC supply voltage EMD-SL-PS45-500AC 2885317 1 3 Technical Data General Data Input voltage range See “Ordering Data” Nominal frequency 50/60 Hz (only EMD-SL-PS...AC) Operating time 100% Material Plastic, self-extinguishing Degree of protection IP40 Ambient Conditions Ambient temperature (operation) -25°C ... +55°C Ambient temperature (storage) -25°C ... +70°C Permissible humidity (operation) 15% ... 85% 103221_en_00 PHOENIX CONTACT 2 EMD-SL-PS… 4 Mounting C 0A -2312 9 -PS 6 SL 8 6 D- o.:2 EM .-N rd O ~ 0V 23 2VVA Hz 64 /60 0 2 505 23 19 Housing width 22.5 mm AC 30 5-2 4 S4 29 L-P8 85 D-So.:2 M E .-N Ord V~ 0 23 2VVA Hz 64 /60 0 2 505 23 19 Housing width 45 mm The power module for power supply is supplied in a transport casing to prevent the connection legs from being bent. To install the power module in the relay housing, remove the transport casing and position the power module in the recess in the side of the housing (ensure that it is the right way round). The red locking latches snap in with an audible click when the power module is securely positioned. To remove the power module, press the two red locking latches together and pull out the power module. 103221_en_00 PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany • Phone: +49 - 52 35 - 30 0 PHOENIX CONTACT • P.O.Box 4100 • Harrisburg • PA 17111-0100 • USA • Phone: +717-944-1300 www.phoenixcontact.com 3