2866297

https://www.phoenixcontact.com/us/products/2866297 Power supply unit - MINI-PS-100-240AC/10-15DC/8 - 2866297 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 10 V DC ... 15 V DC/8 A Product Description MINI POWER power supplies for MCR technology In measurement and control technology (MCR), modular electronics housing has become the industry standard. MINI POWER is the power supply unit to go with it. The devices are flexible, thanks to special voltages and special versions. Your advantages  Easy-maintenance connection technology thanks to keyed COMBICON connectors  Remote monitoring of output voltage via switching output Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918975036 Weight per Piece (excluding packing) 560.000 g Custom tariff number 85044030 Country of origin China Technical data Dimensions Width 67.5 mm Height 99 mm Depth 107 mm Ambient conditions 12/22/2019   Page 1 / 7 https://www.phoenixcontact.com/us/products/2866297 Power supply unit - MINI-PS-100-240AC/10-15DC/8 - 2866297 Technical data Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Input data Nominal input voltage range 100 V AC ... 240 V AC Input voltage range 85 V AC ... 264 V AC 90 V DC ... 350 V DC AC frequency range 45 Hz ... 65 Hz Current consumption 1.3 A (120 V AC) 0.8 A (230 V AC) 1.3 A (90 V DC) 0.4 A (350 V DC) Nominal power consumption 109.1 W Inrush current < 15 A (typical) Mains buffering time > 20 ms (120 V AC) > 20 ms (230 V AC) Input fuse 3.15 A (slow-blow, internal) Recommended breaker for input protection 6 A ... 16 A Output data Nominal output voltage 12 V DC ±1 % 10 V DC ±1 % 15 V DC ±1 % Setting range of the output voltage (USet) 10 V DC ... 15 V DC (> 12 V DC, constant capacity restricted) Nominal output current (IN) 8 A (-25 °C ... 60 °C) POWER BOOST (IBoost) 6.6 A (-25°C ... 40°C permanent ) Derating 60 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for assembling redundant systems and increasing efficiency Connection in series yes Residual ripple < 40 mVPP (20 MHz) Output power 100 W Typical response time < 0.4 s Peak switching voltages nominal load < 100 mVPP (20 MHz) Maximum power dissipation in no-load condition < 2.5 W Power loss nominal load max. < 12 W General 12/22/2019   Page 2 / 7 https://www.phoenixcontact.com/us/products/2866297 Power supply unit - MINI-PS-100-240AC/10-15DC/8 - 2866297 Technical data General Net weight 0.4 kg Operating voltage display Green LED Efficiency > 88 % (for 230 V AC and nominal values) Insulation voltage input/output 3 kV (type test) 3 kV (routine test) Protection class II (in closed control cabinet) Degree of protection IP20 MTBF (IEC 61709, SN 29500) > 984000 h (40 °C) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions alignable: horizontally 0 mm, vertically 50 mm Connection data, input Connection method Pluggable screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 7 mm Screw thread M3 Connection data, output Connection method Pluggable screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 7 mm Screw thread M3 Connection data for signaling Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 12/22/2019   Page 3 / 7 https://www.phoenixcontact.com/us/products/2866297 Power supply unit - MINI-PS-100-240AC/10-15DC/8 - 2866297 Technical data Connection data for signaling Conductor cross section AWG max. 12 Screw thread M3 Standards EMC requirements for noise immunity EN 61000-6-1 EN 61000-6-2 EMC requirements for noise emission EN 61000-6-3 EN 61000-6-4 Standard - Electrical safety EN 60950-1/VDE 0805 (SELV) Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) Standard – Safety extra-low voltage EN 60950-1 (SELV) EN 60204 (PELV) Standard - Safe isolation DIN VDE 0100-410 Standard – Limitation of mains harmonic currents EN 61000-3-2 Rail applications EN 50121-4 Conformance/approvals UL approvals UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950-1 UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) EMC data Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Low Voltage Directive Conformance with LV directive 2006/95/EC Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 25; For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 12/22/2019   Page 4 / 7 https://www.phoenixcontact.com/us/products/2866297 Power supply unit - MINI-PS-100-240AC/10-15DC/8 - 2866297 Block diagram Classifications eCl@ss eCl@ss 4.0 27040700 eCl@ss 4.1 27040700 eCl@ss 5.0 27049000 eCl@ss 5.1 27049000 eCl@ss 6.0 27049000 eCl@ss 7.0 27049002 eCl@ss 8.0 27049002 eCl@ss 9.0 27040701 ETIM ETIM 2.0 EC001039 ETIM 3.0 EC001039 ETIM 4.0 EC000599 ETIM 5.0 EC002540 ETIM 6.0 EC002540 ETIM 7.0 EC002540 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 UNSPSC 18.0 39121004 UNSPSC 19.0 39121004 UNSPSC 20.0 39121004 12/22/2019   Page 5 / 7 https://www.phoenixcontact.com/us/products/2866297 Power supply unit - MINI-PS-100-240AC/10-15DC/8 - 2866297 Classifications UNSPSC UNSPSC 21.0 39121004 Approvals Approvals Approvals UL Listed / UL Recognized / cUL Recognized / cUL Listed / EAC / EAC / cULus Recognized / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 125 V Nominal current IN 1A  FILE E 123528 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 211944 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 211944 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528     Nominal voltage UN 125 V Nominal current IN 1A 12/22/2019   Page 6 / 7 https://www.phoenixcontact.com/us/products/2866297 Power supply unit - MINI-PS-100-240AC/10-15DC/8 - 2866297 Approvals EAC      EAC-Zulassung EAC      RU CDE.A*30.B.01082 cULus Recognized       cULus Listed       Accessories Accessories Device protection Type 3 surge protection device - PLT-SEC-T3-230-FM-UT - 2907919 Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage 230 V AC/DC.     Type 3 surge protection device - PLT-SEC-T3-24-FM-UT - 2907916 Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage 24 V AC/DC.     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 12/22/2019   Page 7 / 7