2866378

https://www.phoenixcontact.com/us/products/2866378 DC/DC converters - QUINT-PS- 24DC/24DC/10 - 2866378 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) QUINT DC/DC converter, primary-switched, input: 24 V DC, output: 24 V DC/10 A Product Description The QUINT DC-DC converter 24 V/10 A converts the DC voltage from 18 V ... 32 V to an adjustable, controlled and galvanically separated 24 V output voltage. If no regulated and stable 24 V DC voltage is available to supply a load, DC-DC converters ensure the adjustment of the 24 V load: A nonregulated DC voltage is converted to an adjustable output voltage of 22.5 V ...28.5 V. Due to electrical isolation, the DC voltage circuits are electrically isolated from each other in a safe way. With a design width of only 80 mm, the housing is extremely slim. The floating DC-OK output and an LED are available for signaling. Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 1371.6 g Custom tariff number 85044030 Country of origin China Technical data Dimensions Width 80 mm Height 130 mm Depth 125 mm Width with alternative assembly 122 mm Height with alternative assembly 130 mm Depth with alternative assembly 83 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) Ambient temperature (storage/transport) -40 °C ... 85 °C 04/12/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2866378 DC/DC converters - QUINT-PS- 24DC/24DC/10 - 2866378 Technical data Ambient conditions Max. permissible relative humidity (operation) 95 % (at 25 °C, non-condensing) Noise immunity EN 61000-6-2:2005 Input data Nominal input voltage 24 V DC Nominal input voltage range 24 V DC Input voltage range 18 V DC ... 32 V DC Frequency range DC 0 Hz Current consumption typ. 11.4 A (24 V) Inrush surge current < 20 A (typical) Power failure bypass > 3 ms (24 V DC) Input fuse 25 A (slow-blow, internal) Type of protection Transient surge protection Protective circuit/component Varistor Output data Nominal output voltage 24 V DC ±1 % Setting range of the output voltage (USet) 22.5 V DC ... 28.5 V DC (> 24 V DC, constant capacity restricted) Nominal output current (IN) 10 A (-25 °C ... 60 °C) Derating 60 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series Yes Max. capacitive load Unlimited Active current limitation Approx. 18 A Control deviation < 1 % (change in load, static 10 % ... 90 %) < 2 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Residual ripple < 60 mVPP Output power 240 W Typical response time 500000 h Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions Can be aligned: Horizontally 0 mm, vertically 50 mm Connection data, input Connection method Pluggable screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 7 mm Screw thread M3 Connection data, output Connection method Pluggable screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 7 mm Screw thread M3 Signaling Output name DC OK active Output description UOUT > 21.5 V: High signal Maximum switching voltage ≤ 24 V DC Output voltage + 24 V DC Continuous load current ≤ 40 mA Status display "DC OK" LED green Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 04/12/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2866378 DC/DC converters - QUINT-PS- 24DC/24DC/10 - 2866378 Technical data Signaling Conductor cross section AWG max. 12 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Screw thread M3 Output name DC OK floating Output description UOUT > 21.5 V: Contact closed Maximum switching voltage ≤ 30 V AC/DC Continuous load current ≤1A Status display "DC OK" LED green Standards and Regulations Electromagnetic compatibility Conformance with EMC directive 89/336/EC Shock 30g in each direction, according to IEC 60068-2-27 Noise immunity EN 61000-6-2:2005 Connection in acc. with standard CUL Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-6 Standard – Electrical equipment of machines EN 60204-1 Standard - Safety of transformers EN 61558-2-17 Standard - Electrical safety EN 60950-1/VDE 0805 (SELV) Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) Standard – Safety extra-low voltage EN 60950-1 (SELV) EN 60204 (PELV) Standard - Safe isolation DIN VDE 0100-410 Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment EN 50178 Shipbuilding approval Germanischer Lloyd (EMC 2), ABS, DNV UL approvals UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950 UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) Classifications eCl@ss eCl@ss 4.0 27230209 04/12/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2866378 DC/DC converters - QUINT-PS- 24DC/24DC/10 - 2866378 Classifications eCl@ss eCl@ss 4.1 27230209 eCl@ss 5.0 27230209 eCl@ss 5.1 27230209 eCl@ss 6.0 27230209 eCl@ss 7.0 27230209 eCl@ss 8.0 27210901 ETIM ETIM 2.0 EC001039 ETIM 3.0 EC001039 ETIM 4.0 EC000599 ETIM 5.0 EC002046 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 Approvals Approvals Approvals UL Recognized / UL Listed / cUL Recognized / cUL Listed / GL / DNV / EAC / EAC / cULus Recognized / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details 04/12/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2866378 DC/DC converters - QUINT-PS- 24DC/24DC/10 - 2866378 Approvals UL Recognized  UL Listed  cUL Recognized  cUL Listed  GL  DNV  EAC  EAC  cULus Recognized  cULus Listed  Drawings 04/12/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2866378 DC/DC converters - QUINT-PS- 24DC/24DC/10 - 2866378 Diagram Block diagram POWER BOOST DC OK 13 14 Dimensional drawing 130 125 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/12/2016   Page 7 / 7