2866527

https://www.phoenixcontact.com/us/products/2866527 Redundancy module - TRIO-DIODE/48DC/2X10/1X20 - 2866527 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Redundancy module with function monitoring, 48 V DC, 2x 10 A, 1x 20 A Product Description TRIO DIODE is the DIN-rail mountable redundancy module from the TRIO POWER product range. Using the redundancy module, it is possible for two power supply units of the same type connected in parallel on the output side to increase performance or for redundancy to be 100 % isolated from one another. Redundant systems are used in systems that place particularly high demands on operational reliability. The connected power supply units must be large enough that the total current requirements of all loads can be met by one power supply unit. The redundant structure of the power supply therefore ensures long-term, permanent system availability. In the event of an internal device fault or failure of the mains power supply on the primary side, the other device automatically takes over the entire power supply of the loads without interruption. The floating signal contact and LED immediately indicate the loss of redundancy. Your advantages  Save energy  Permanent monitoring of redundancy  Consistent redundancy up to the load Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356562973 Weight per Piece (excluding packing) 540.000 g Custom tariff number 85049091 Country of origin China Technical data Dimensions 09/12/2019   Page 1 / 6 https://www.phoenixcontact.com/us/products/2866527 Redundancy module - TRIO-DIODE/48DC/2X10/1X20 - 2866527 Technical data Dimensions Width 32 mm Height 130 mm Depth 115 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 55° C derating : 2.5%/K) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Climatic class 3K3 (in acc. with EN 60721) Degree of pollution 2 Input data Nominal input voltage range 48 V DC Input voltage range 30 V DC ... 56 V DC Nominal input current 2x 10 A (-25 °C ... 55 °C) 1x 20 A (-25 °C ... 55 °C) Maximum input current 2x 15 A (-25°C ... 40°C) 1x 30 A (-25°C ... 40°C) Output data Nominal output voltage 47.3 V DC (Input/output voltage drop of 48 V ... 0.7 V ) Nominal output current (IN) 20 A (Increasing power) 10 A (Redundancy) Derating 55 °C ... 70 °C (2.5%/K) Connection in series No Maximum power dissipation in no-load condition 7 W (IOUT = 10 A) Power loss nominal load max. 14 W (IOUT = 20 A) General Net weight 0.37 kg Efficiency > 97 % Protection class III Degree of protection IP20 > 10000000 h (40 °C) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions alignable: horizontally 0 mm, vertically 50 mm Connection data, input Connection method Screw connection 09/12/2019   Page 2 / 6 https://www.phoenixcontact.com/us/products/2866527 Redundancy module - TRIO-DIODE/48DC/2X10/1X20 - 2866527 Technical data Connection data, input Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Stripping length 9 mm Screw thread M2,5 Connection data, output Connection method Screw connection Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 10 Stripping length 14 mm Screw thread M3 Connection data for signaling Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Screw thread M2,5 Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Connection in acc. with standard CUL Standards/regulations EN 61000-4-2 Contact discharge 4 kV (Test Level 2) Standards/regulations EN 61000-4-3 Frequency range 80 MHz ... 1 GHz Test field strength 10 V/m (Test Level 3) Frequency range 1.4 GHz ... 2 GHz Test field strength 3 V/m (Test Level 2) 09/12/2019   Page 3 / 6 https://www.phoenixcontact.com/us/products/2866527 Redundancy module - TRIO-DIODE/48DC/2X10/1X20 - 2866527 Technical data Standards and Regulations Standards/regulations EN 61000-4-4 Comments Criterion B Standards/regulations EN 61000-6-3 EN 61000-4-6 Frequency range 0.15 MHz ... 80 MHz Voltage 10 V (Test Level 3) Low Voltage Directive Conformance with LV directive 2006/95/EC Standard - Electrical safety EN 60950-1/VDE 0805 (SELV) Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) Standard – Safety extra-low voltage IEC 60950-1 (SELV) and EN 60204-1 (PELV) Standard - Safe isolation DIN VDE 0100-410 Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment EN 50178 UL approvals UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950-1 Shock 15g in all directions in acc. with IEC 60068-2-27 Vibration (operation) < 15 Hz, amplitude ±2.5 mm 15 Hz ... 150 Hz, 2.3g tv = 90 min. Drawings Block diagram 09/12/2019   Page 4 / 6 https://www.phoenixcontact.com/us/products/2866527 Redundancy module - TRIO-DIODE/48DC/2X10/1X20 - 2866527 Classifications eCl@ss eCl@ss 4.0 27250300 eCl@ss 4.1 27250300 eCl@ss 5.0 27371000 eCl@ss 5.1 27371000 eCl@ss 6.0 27371000 eCl@ss 7.0 27371010 eCl@ss 8.0 27371010 eCl@ss 9.0 27371010 ETIM ETIM 3.0 EC001039 ETIM 4.0 EC002540 ETIM 5.0 EC000683 ETIM 6.0 EC000683 ETIM 7.0 EC000683 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 Approvals Approvals Approvals UL Listed / UL Recognized / cUL Recognized / cUL Listed / EAC / EAC / cULus Recognized / cULus Listed Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 09/12/2019   Page 5 / 6 https://www.phoenixcontact.com/us/products/2866527 Redundancy module - TRIO-DIODE/48DC/2X10/1X20 - 2866527 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 211944 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 211944 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 123528 EAC      EAC-Zulassung EAC      RU CDE.A*30.B.01082 cULus Recognized       cULus Listed       Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/12/2019   Page 6 / 6