2866530

https://www.phoenixcontact.com/us/products/2866530 Power supply unit - TRIO-PS/600DC/24DC/20 - 2866530 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) DIN rail power supply unit, primary-switched, 1-phase, input: 600 V DC; output: 24 V DC/20 A Product description TRIO POWER is the power supply unit for the DIN rail with basic functionality at the highest level. TRIO POWER, 600 V DC, 24 V DC is ideally suited for connection to 600 V DC intermediate circuits of frequency inverters: In the event of a line supply failure, 24 V loads are supplied using the kinetic energy of the motor.       Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 1980.0 GRM Custom tariff number 85044030 Country of origin China Technical data Dimensions Width 115 mm Height 130 mm Depth 152.5 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 55° C derating) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Noise immunity EN 61000-6-2:2005 Input data Nominal input voltage range 600 V DC 10/21/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2866530 Power supply unit - TRIO-PS/600DC/24DC/20 - 2866530 Technical data Input data Input voltage range 450 V DC ... 840 V DC (Dielectric strength up to 900 V DC) Frequency range DC 0 Hz Current consumption 0.9 A (600 V DC) Inrush surge current < 26 A Power failure bypass > 15 ms (600 V DC) Choice of suitable fuses 4 A ... 6 A (1000 V DC) Type of protection Transient surge protection Protective circuit/component Varistor Output data Nominal output voltage 24 V DC ±1 % Setting range of the output voltage 22.5 V DC ... 29.5 V DC (UIN > 475 V DC) 22.5 V DC ... 28 V DC (UIN ≤ 475 V DC) Output current 20 A (-25°C ... 55°C) Derating 55 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series Yes Max. capacitive load Unlimited Current limitation Approx. 25 A (for short-circuit) Control deviation < 1 % (change in load, static 10 % ... 90 %) < 2 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Residual ripple < 40 mVPP Peak switching voltages nominal load < 10 mVPP Maximum power dissipation NO-Load 3.8 W Power loss nominal load max. 45 W General Net weight 2 kg Efficiency > 91 % (With 600 V DC and nominal values) Insulation voltage input/output 4 kV AC (type test) 2 kV AC (routine test) Protection class I (with PE connection) > 701000 h (40°C) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions Can be aligned: Horizontally 0 mm, vertically 50 mm Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Low Voltage Directive Conformance with LV directive 2006/95/EC 10/21/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2866530 Power supply unit - TRIO-PS/600DC/24DC/20 - 2866530 Technical data General Standard – Electrical equipment of machines EN 60204 Standard - Electrical safety EN 60950-1/VDE 0805 (SELV) Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) Standard – Safety extra-low voltage EN 60950-1 (SELV) EN 60204 (PELV) Standard - Safe isolation DIN VDE 0100-410 DIN VDE 0106-1010 Standard – Protection against electric shock DIN 57100-410 Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment DIN VDE 0106-101 Standard – Limitation of mains harmonic currents EN 61000-3-2 UL approvals UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950 Surge voltage category III Connection data, input Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 14 Stripping length 9 mm Screw thread M2,5 Connection data, output Connection method Screw connection Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 6 mm² Conductor cross section stranded min. 0.5 mm² Conductor cross section stranded max. 4 mm² Conductor cross section AWG/kcmil min. 12 Conductor cross section AWG/kcmil max 10 Stripping length 14 mm Signaling Status display "DC OK" LED green 10/21/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2866530 Power supply unit - TRIO-PS/600DC/24DC/20 - 2866530 Technical data Signaling Note on status display UOUT > 21.5 V: LED lights up Classifications eCl@ss eCl@ss 4.0 27040702 eCl@ss 4.1 27040702 eCl@ss 5.0 27049002 eCl@ss 5.1 27049002 eCl@ss 6.0 27049002 eCl@ss 7.0 27049002 eCl@ss 8.0 27049002 ETIM ETIM 3.0 EC001039 ETIM 4.0 EC000599 ETIM 5.0 EC002540 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 Approvals Approvals Approvals UL Recognized / UL Listed / cUL Recognized / cUL Listed / cULus Recognized / cULus Listed Ex Approvals Approvals submitted 10/21/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2866530 Power supply unit - TRIO-PS/600DC/24DC/20 - 2866530 Approvals Approval details UL Recognized  UL Listed  cUL Recognized  cUL Listed  cULus Recognized  cULus Listed  Drawings Block diagram PE Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/21/2014   Page 5 / 5