2866792

https://www.phoenixcontact.com/us/products/2866792 Power supply unit - QUINT-PS/3AC/24DC/20 - 2866792 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched QUINT POWER power supply for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 3-phase, output: 24 V DC/20 A Product Description QUINT POWER power supplies with maximum functionality QUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states before errors occur. Reliable starting of heavy loads takes place via the static power reserve POWER BOOST. Thanks to the adjustable voltage, all ranges between 5 V DC ... 56 V DC are covered. Product Features ■ ■ ■ Reliable starting of difficult loads High level of system availability even in the event of permanent phase failure Preventive function monitoring Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 1851.0 g Custom tariff number 85044030 Country of origin Thailand Technical data Dimensions Width 69 mm Height 130 mm Depth 125 mm Width with alternative assembly 122 mm Height with alternative assembly 130 mm 04/11/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2866792 Power supply unit - QUINT-PS/3AC/24DC/20 - 2866792 Technical data Dimensions Depth with alternative assembly 72 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) 95 % (at 25 °C, non-condensing) Noise immunity EN 61000-6-2:2005 Maximum altitude 5000 m Input data Nominal input voltage range 3x 400 V AC ... 500 V AC Input voltage range 3x 320 V AC ... 575 V AC 2x 360 V AC ... 575 V AC 450 V DC ... 800 V DC AC frequency range 45 Hz ... 65 Hz Frequency range DC 0 Hz Discharge current to PE < 3.5 mA Current consumption 3x 1.6 A (400 V AC) 3x 1.3 A (500 V AC) 0.9 A (600 V DC) Inrush surge current < 20 A (typical) Power failure bypass > 28 ms (400 V AC) > 43 ms (500 V AC) Choice of suitable circuit breakers 6 A ... 16 A (AC: Characteristics B, C, D, K) Type of protection Transient surge protection Protective circuit/component Varistor, gas-filled surge arrester Output data Nominal output voltage 24 V DC ±1 % Setting range of the output voltage (USet) 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted) Nominal output current (IN) 20 A (-25°C ... 60°C, UOUT = 24 V DC) POWER BOOST (IBoost) 26 A (-25°C ... 40°C permanent, UOUT = 24 V DC ) Selective Fuse Breaking (ISFB) 120 A (12 ms) Derating 60 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series Yes Control deviation < 1 % (change in load, static 10 % ... 90 %) < 3 % (change in load, dynamic 10 % ... 90 %) 04/11/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/2866792 Power supply unit - QUINT-PS/3AC/24DC/20 - 2866792 Technical data Output data < 0.1 % (change in input voltage ±10 %) Residual ripple < 40 mVPP (with nominal values) Output power 480 W Typical response time < 0.16 s Peak switching voltages nominal load < 40 mVPP (at nominal values, 20 MHz) Maximum power dissipation in no-load condition 11 W Power loss nominal load max. 40 W General Net weight 1.5 kg Operating voltage display Green LED Efficiency > 93 % (at 400 V AC and nominal values) Insulation voltage input/output 4 kV AC (type test) 2 kV AC (routine test) Protection class I MTBF (IEC 61709, SN 29500) > 900000 h (25 °C) > 534000 h (40°C) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions Alignable: 5 mm horizontally, 15 mm next to active components, 50 mm vertically Connection data, input Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 18 Conductor cross section AWG max. 10 Stripping length 7 mm Screw thread M4 Connection data, output Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 12 04/11/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2866792 Power supply unit - QUINT-PS/3AC/24DC/20 - 2866792 Technical data Connection data, output Conductor cross section AWG max. 10 Stripping length 7 mm Screw thread M4 Connection data for signaling Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 6 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 18 Conductor cross section AWG max. 10 Screw thread M4 Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Shock 30g in each direction, according to IEC 60068-2-27 Noise immunity EN 61000-6-2:2005 Connection in acc. with standard CSA Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-6 Standard – Electrical equipment of machines EN 60204-1 Standard - Electrical safety IEC 60950-1/VDE 0805 (SELV) Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) Standard – Safety extra-low voltage IEC 60950-1 (SELV) and EN 60204-1 (PELV) Standard - Safe isolation DIN VDE 0100-410 Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment EN 50178 Standard – Limitation of mains harmonic currents EN 61000-3-2 Standard - Equipment safety GS (tested safety) Standard - Approval for medical use IEC 60601-1, 2 x MOOP Shipbuilding approval Germanischer Lloyd (EMC 1), ABS, LR, RINA, NK, DNV, BV UL approvals UL Listed UL 508 UL/C-UL Recognized UL 60950-1 (3-wire + PE, star net) UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) Low Voltage Directive Conformance with LV directive 2006/95/EC 04/11/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2866792 Power supply unit - QUINT-PS/3AC/24DC/20 - 2866792 Technical data Standards and Regulations Approval - requirement of the semiconductor industry with regard to mains SEMI F47-0706 Compliance Certificate voltage dips Information technology equipment - safety (CB scheme) CB Scheme Rail applications EN 50121-4 Classifications eCl@ss eCl@ss 4.0 27040702 eCl@ss 4.1 27040702 eCl@ss 5.0 27049002 eCl@ss 5.1 27049002 eCl@ss 6.0 27049002 eCl@ss 7.0 27049002 eCl@ss 8.0 27049002 eCl@ss 9.0 27040701 ETIM ETIM 2.0 EC001039 ETIM 3.0 EC001039 ETIM 4.0 EC000599 ETIM 5.0 EC002540 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 Approvals Approvals Approvals CSA / UL Recognized / UL Listed / cUL Recognized / LR / GL / BV / DNV / ABS / NK / RINA / BSH / IECEE CB Scheme / SEMI F47 / Bauartgeprüft / EAC / EAC / cULus Recognized 04/11/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2866792 Power supply unit - QUINT-PS/3AC/24DC/20 - 2866792 Approvals Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details CSA  UL Recognized  UL Listed  cUL Recognized  LR  GL  BV  DNV  ABS  NK  RINA  04/11/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2866792 Power supply unit - QUINT-PS/3AC/24DC/20 - 2866792 Approvals BSH  IECEE CB Scheme  SEMI F47  Bauartgeprüft  EAC  EAC  cULus Recognized  Drawings Block diagram L1 (+) L2 L3 (-) DC OK I < IN 13 14 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/11/2016   Page 7 / 7