2867089

https://www.phoenixcontact.com/us/products/2867089 Wireless module - RAD-ISM-900-SET-BD-BUS - 2867089 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bidirectional, wireless, 900 MHz transmission system (America), made up of 2 transceivers (transmitter and receiver) Why buy this product  Additional transceivers can be added to configure repeater systems  Two omnidirectional antennas (optional)  Two pre-programmed transceivers that automatically communicate with each other  No additional parameterization or programming required  Individual transceivers are listed under Class I, Division 2  Operates in the license-free 902 - 928 MHz ISM band  Status of the wireless connection via a relay (RF link)  Each transceiver has 1 analog input (4 ... 20 mA) and 2 digital inputs (5 ... 30 V AC/DC), as well as 1 analog output and 2 digital outputs, for direct connection to compatible sensors and actuators and for data transmission in both directions  The integrated bus foot enables connection to additional I/O modules  Frequency hopping spread spectrum Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 440.000 g Custom tariff number 85176200 Country of origin Canada Technical data Note Trade restriction The products are offered exclusively for export outside the EU and the European Economic Area. Dimensions 11/01/2016   Page 1 / 3 https://www.phoenixcontact.com/us/products/2867089 Wireless module - RAD-ISM-900-SET-BD-BUS - 2867089 Technical data Dimensions Width 22.5 mm Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Wireless set Set contents 2 transceivers General Mounting position any Assembly instructions DIN rail NS 35 Housing material Polyamide PA non-reinforced Conformance FCC Directive, Part 15.247 ISC Directive RSS 210 Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 14 Connection method Screw connection Stripping length 8 mm Screw thread M3 Standards and Regulations Electromagnetic compatibility FCC Part 15.247 / ISC RSS 210 Channel distance 22 kHz Conformance FCC Directive, Part 15.247 ISC Directive RSS 210 Drawings 11/01/2016   Page 2 / 3 https://www.phoenixcontact.com/us/products/2867089 Wireless module - RAD-ISM-900-SET-BD-BUS - 2867089 Block diagram A 1 B 2 GND 3 9 IN 1 A RF Link 10 IN 1 B 11 IN 2 A POWER +24 V 4 OUT I+ 5 12 IN 2 B µC RF OUT I- 6 IN I+ 7 IN I- 8 OUT 1 13 OUT 1 A 14 OUT 1 B RB OUT 2 15 OUT 2 A 16 OUT 2 B Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 11/01/2016   Page 3 / 3