2867937

Extract from the online catalog     EMD-SL-C-UC-10 Order No.: 2867937 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2867937   Monitoring relay for monitoring 1-phase currents of 0…10 A AC/DC, undercurrent, supply voltage can be selected using power module, 1 PDT   Product notes WEEE/RoHS-compliant since: 09/03/2007 Commercial data GTIN (EAN) 4 046356 046954 sales group H220 Pack 1 pcs. Customs tariff 85364900 Catalog page information Page 652 (IF-2009) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Product description Increasingly higher demands are being placed on safety and system availability – across all sectors. Processes are becoming more and more complex, not only in mechanical engineering and the chemical industry, but also in plant and automation technology. Demands on power engineering are also increasing constantly. Error-free and therefore cost-effective operation can only be achieved through continuous monitoring of important network and system parameters. Electronic monitoring relays in the EMD series are available for a wide range of monitoring tasks to avoid the consequences of errors or to keep them within limits. PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 5 Feb 2, 2011 EMD-SL-C-UC-10 Order No.: 2867937 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2867937 The operating states are indicated using colored LEDs, errors that may occur can be sent to a control system via a floating contact or can shut down a part of the system. Some device versions are equipped with startup and response delays in order to briefly tolerate measured values outside the set monitoring range. Technical data Input data Input current range 0 mA ... 100 mA AC/DC (Connection terminals: I1 and GND) 0 A ... 1 A AC/DC (Connection terminals: I2 and GND) 0 A ... 10 A AC/DC (Connection terminals: I3 and GND) Overload capacity 800 mA (at IN = 100 mA) 3 A (at IN = 1 A) 12 A (at IN = 10 A) Maximum temperature coefficient < 0.1 %/K Function Undercurrent Min. setting range 5 % ... 95 % (From IN) Max. setting range 10 % ... 100 % (From IN) Setting range for response delay 0.2 s ... 10 s Basic accuracy ± 5 % (of scale end value) Setting accuracy ≤ 5 % (of scale end value) Repeat accuracy ≤2% Recovery time 500 ms Contact side Contact type 1 floating PDT Maximum switching voltage 250 V AC (in acc. with IEC 60664-1) Interrupting rating (ohmic load) max. 750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing) 1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing) Output fuse 5 A (fast-blow) Power supply Supply voltage range 24 V AC ... 230 V AC (see Power modules) 24 V DC (see Power modules) General data Width 22.5 mm Height 90 mm Depth 113 mm Mechanical service life Approx. 2 x 10 cycles PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de 7 Page 2 / 5 Feb 2, 2011 EMD-SL-C-UC-10 Order No.: 2867937 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2867937 Operating mode 100% operating factor Ambient temperature (operation) -25 °C ... 55 °C -25 °C ... 40 °C (corresponds to UL 508) Ambient temperature (storage/transport) -25 °C ... 70 °C Mounting position Any Assembly instructions on TS 35 profile rail acc. to EN 60715 Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Surge voltage category III, basic insulation (as per EN 50178) Housing insulation material Polyamide PA, self-extinguishing Color green Rated insulation voltage 300 V (According to EN 50178) Conformance CE-compliant UL, USA / Canada UL/C-UL listed UL 508 Connection data Conductor cross section stranded min. 0.25 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG/kcmil min. 20 Conductor cross section AWG/kcmil max 14 Stripping length 8 mm Type of connection Screw connection Certificates / Approvals Certification PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de CUL Listed, UL Listed Page 3 / 5 Feb 2, 2011 EMD-SL-C-UC-10 Order No.: 2867937 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2867937 Additional products Item Designation Description 2866103 EMD-SL-PS- 24AC Power modules, pluggable, for EMD-SL-..., supply voltage: 20.2...26.4 V AC 2885359 EMD-SL-PS- 24DC Power modules, pluggable, for EMD-SL-..., supply voltage: 20 V DC ... 30 V DC 2866116 EMD-SL-PS-110AC Power modules, pluggable, for EMD-SL-..., supply voltage: 88...121 V AC 2885731 EMD-SL-PS-120AC Power modules, pluggable, for EMD-SL-..., supply voltage: 108 V AC ... 132 V AC 2866129 EMD-SL-PS-230AC Power modules, pluggable, for EMD-SL-..., supply voltage: 195...264 V AC General Diagrams/Drawings Block diagram PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 5 Feb 2, 2011 EMD-SL-C-UC-10 Order No.: 2867937 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2867937 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de © 2010 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 5 / 5 Feb 2, 2011