2885773

https://www.phoenixcontact.com/gb/products/2885773 Monitoring relay - EMD-FL-3V-230 - 2885773 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Monitoring relay for monitoring 3-phase voltages of 160 ... 300 V AC, undervoltage, window, phase sequence, phase failure, asymmetry, wide-range power supply unit, 2 PDTs Product Description Increasingly higher demands are being placed on safety and system availability - across all sectors. Processes are becoming more and more complex, not only in mechanical engineering and the chemical industry, but also in plant and automation technology. Demands on power engineering are also increasing constantly. Error-free and therefore cost-effective operation can only be achieved through continuous monitoring of important network and system parameters. Electronic monitoring relays in the EMD series are available for a wide range of monitoring tasks to avoid the consequences of errors or to keep them within limits. The operating states are indicated using colored LEDs, errors that may occur can be sent to a control system via a floating contact or can shut down a part of the system. Some device versions are equipped with startup and response delays in order to briefly tolerate measured values outside the set monitoring range. Why buy this product  Adjustable asymmetry  Variable supply voltage range  Adjustable response delay  Adjustable via potentiometer on the front Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356100786 Weight per Piece (excluding packing) 164.900 g Custom tariff number 85364900 Country of origin Austria Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area 04/16/2018   Page 1 / 5 https://www.phoenixcontact.com/gb/products/2885773 Monitoring relay - EMD-FL-3V-230 - 2885773 Technical data Dimensions Width 22.5 mm Height 90 mm Depth 113 mm Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C -25 °C ... 40 °C (corresponds to UL 508) Ambient temperature (storage/transport) -25 °C ... 70 °C Input data Nominal input voltage UN 3 N ~ 230/132 V Maximum temperature coefficient < 0.1 %/K Function Undervoltage, window, asymmetry, phase sequence, phase failure Min. setting range -30 % ... 20 % (From UN) Max. setting range -20 % ... 30 % (From UN) Min setting range of the voltage threshold value 161 V AC ... 276 V AC Max. setting range of the voltage threshold value 184 V AC ... 299 V AC Setting range for response delay 0.1 s ... 10 s Basic accuracy ± 5 % (of scale end value) Setting accuracy ≤ 5 % (of scale end value) Repeat accuracy ≤2% Asymmetry 5 % ... 25% / OFF Recovery time 500 ms Contact side Contact type 2 floating PDT contacts Maximum switching voltage 250 V AC (in acc. with IEC 60664-1) Interrupting rating (ohmic load) max. 750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing) 1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing) Output fuse 5 A (fast-blow) Power supply Supply voltage range 24 V AC ... 240 V AC -15 % ... +10 % 24 V DC ... 240 V DC -20 % ... +25 % General Mechanical service life Approx. 2x 10 cycles Operating mode 100% operating factor Mounting position any Assembly instructions on standard DIN rail NS 35 in accordance with EN 60715 Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Overvoltage category III, basic insulation (as per EN 50178) Housing insulation material Polyamide PA, self-extinguishing 7 04/16/2018   Page 2 / 5 https://www.phoenixcontact.com/gb/products/2885773 Monitoring relay - EMD-FL-3V-230 - 2885773 Technical data General Color green Rated insulation voltage 300 V (acc. to EN 50178) Conformance CE-compliant UL, USA/Canada UL/C-UL listed UL 508 Connection data Conductor cross section flexible min. 0.25 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 14 Stripping length 8 mm Connection method Screw connection Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 Low Voltage Directive Conformance with LV directive 2006/95/EC Conformance CE-compliant UL, USA/Canada UL/C-UL listed UL 508 Drawings Block diagram 16 18 26 28 L1 L2 L3 15 (N) 25 A1 A2 U = 24...240 V AC/DC Classifications eCl@ss eCl@ss 5.0 27371801 eCl@ss 5.1 27371801 eCl@ss 6.0 27371801 eCl@ss 7.0 27371801 eCl@ss 8.0 27371801 eCl@ss 9.0 27371801 04/16/2018   Page 3 / 5 https://www.phoenixcontact.com/gb/products/2885773 Monitoring relay - EMD-FL-3V-230 - 2885773 Classifications ETIM ETIM 2.0 EC001438 ETIM 3.0 EC001438 ETIM 4.0 EC001438 ETIM 5.0 EC001438 ETIM 6.0 EC001438 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121535 UNSPSC 11 39121535 UNSPSC 12.01 39121535 UNSPSC 13.2 41113620 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / EAC / cULus Listed Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 172140 cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 172140 EAC      EAC-Zulassung EAC      RU CDE.A*30.B.01082 04/16/2018   Page 4 / 5 https://www.phoenixcontact.com/gb/products/2885773 Monitoring relay - EMD-FL-3V-230 - 2885773 Approvals cULus Listed       Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 04/16/2018   Page 5 / 5