2891042

https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Factoryline Power over Ethernet splitter (PD) for separating power and data according to IEEE 802.3af and at, no configuration required, can be used with 10, 100, 1000 Mbps networks, 24 V DC output voltage Product Description Power over Ethernet splitter (PD) for separating power and data according to IEEE 802.3af and IEEE 802.3at. The Power over Ethernet splitter, which is suitable for industrial applications, enables the decoupling of Ethernet data with up to 1000 Mbps of the transmitted energy. The 24 V DC voltage is supplied to the PoE splitter in line with the application. Depending on the type of connected PoE supply (802.3af/802.3at), 10.5 W or 21.5 W are available to the terminal device on the splitter. This means that terminal devices without PoE interface such as WLAN or Bluetooth access points, IP phones or IP cameras can be easily connected to a PoE interface. Your advantages  Compact housing  IEEE 802.3af, at Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356076036 Weight per Piece (excluding packing) 460.000 g Custom tariff number 85176200 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions 07/04/2020   Page 1 / 11 https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Technical data Dimensions Width 40 mm Height 100 mm Depth 109 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing) Air pressure (operation) 86 kPa ... 108 kPa Air pressure (storage/transport) 66 kPa ... 108 kPa (3500 m above sea level) Interfaces Interface Ethernet (RJ45) No. of ports 1 (RJ45 ports) Transmission physics Copper Transmission speed 10/100/1000 Mbps Transmission length 100 m (Total) Interface Ethernet No. of ports 1 (RJ45 ports) Connection method RJ45 Transmission speed 10/100/1000 Mbps Transmission length up to 100 m (complete system) Function Basic functions PD, conforms to IEEE 802.3af/at Status and diagnostic indicators LEDs: POE, 24 V DC Network expansion parameters Maximum conductor length (twisted pair) 100 m Supply voltage Supply voltage 48 V DC (via PoE) Supply voltage range 44 V DC ... 57 V DC General Mounting type DIN rail Type AX Stand-alone Net weight 320 g Housing material Metal 07/04/2020   Page 2 / 11 https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Technical data General MTTF 1344.41 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) 520.19 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) 52.81 Years (SN 29500 standard, temperature 70°C, operating cycle 100%) Connection data Conductor cross section 0.14 mm² ... 1.5 mm² Connection cross section AWG 24 ... 12 Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27 Test result 30g Type of test Free fall in acc. with IEC 60068-2-32 Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2:2005 Vibration (storage/transport) 5g, 150 Hz, in acc. with IEC 60068-2-6 Vibration (operation) in acc. with IEC 60068-2-6: 5g, 150 Hz Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 07/04/2020   Page 3 / 11 https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Schematic diagram 24 V status and output voltage indicator (green) on:       24 V output voltage available off:       24 V output voltage not available PoE+:   Types of the connected PSE signal (green/orange) Green:  Type 1 PSE, i.e., min. 12.95 W available at the input Orange: Type 2 PSE, i.e., min. 25.50 W available at the input 07/04/2020   Page 4 / 11 https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Block diagram PoE splitter 1) Power Sourcing Equipment (PSE) 2) Power over Ethernet connection 3) PoE splitter (PD) 4) Data 5) Voltage 6) Termination device Schematic diagram Voltage output 1 24 V DC 2 GND 3 24 V DC 4 GND 07/04/2020   Page 5 / 11 https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Schematic diagram Assignment of the LAN sockets: Pin assignment, 10/100 Mbit 1    TD+ (transmit) 2    TD- (transmit) 3    RD+ (receive) 4    5    6    RD- (receive) 7    8    - 07/04/2020   Page 6 / 11 https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Schematic diagram Assignment of the LAN sockets: Pin assignment, 1000 Mbit 1    DA+ (bidirectional) 2    DA- (bidirectional) 3    DB+ (bidirectional) 4    DC+ (bidirectional) 5    DC- (bidirectional) 6    DB- (bidirectional) 7    DD+ (bidirectional) 8    DD- (bidirectional) 07/04/2020   Page 7 / 11 https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Schematic diagram Assignment of the LAN sockets: Pin PoE / PoE+ 1   +/- (alt. A) 2   +/- (alt. A) 3   +/- (alt. A) 4   +/- (alt. B) 5   +/- (alt. B) 6   +/- (alt. A) 7   +/- (alt. B) 8   +/- (alt. B) 07/04/2020   Page 8 / 11 https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Schematic diagram Device connections Classifications eCl@ss eCl@ss 10.0.1 19170401 eCl@ss 4.0 27250500 eCl@ss 4.1 27250500 eCl@ss 5.0 19030100 eCl@ss 5.1 19030100 eCl@ss 6.0 19170100 eCl@ss 7.0 19170106 eCl@ss 8.0 19170106 eCl@ss 9.0 19170106 ETIM ETIM 2.0 EC000731 07/04/2020   Page 9 / 11 https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Classifications ETIM ETIM 3.0 EC000731 ETIM 4.0 EC001128 ETIM 5.0 EC000734 ETIM 6.0 EC000734 ETIM 7.0 EC000734 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201410 UNSPSC 13.2 43222612 UNSPSC 18.0 43222612 UNSPSC 19.0 43222612 UNSPSC 20.0 43222612 UNSPSC 21.0 43222612 Accessories Accessories End block End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     Mounting rail adapter DIN rail adapter - FL DIN RA - 2891053 The FL DIN RA is installed in a standard, 19-inch rack (EIA-310-D, IEC 60297-3-100) to allow DIN rail mounted equipment to be rack mounted.     Patch cable 07/04/2020   Page 10 / 11 https://www.phoenixcontact.com/us/products/2891042 Ethernet module - FL PD 1001 T GT - 2891042 Accessories Patch cable - FL CAT5 PATCH 0,3 - 2832250 Patch cable, CAT5, assembled, 0.3 m     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 07/04/2020   Page 11 / 11