2897758

https://www.phoenixcontact.com/us/products/2897758 Bus coupler - IL EIP BK DI8 DO4 2TX-PAC - 2897758 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) EtherNet/IP™ bus coupler, 8 inputs, 24 V DC, 4 outputs, 24 V DC, 500 mA, complete with I/O connectors Product Description The bus coupler for the EtherNet/IP™ protocol has 4 digital outputs and 8 digital inputs. This package contains all the necessary Inline plugs for connecting the supply and the I/Os. The Inline terminals can be labeled using pull-out labeling fields. The fields have insert cards that can be labeled individually to suit the application. Additionally, there is the ZBFM-6... Zack marker strip for labeling the terminal points.   Product Features  Up to 61 terminals (16 PCP devices) can be connected  8 digital inputs, 4 digital outputs onboard  EtherNet/IP™, Version 1.2  Web-based management  2 RJ45 connections  Automatic speed detection of the system bus  Diagnostic and status indicators  80 mm design width     Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 340.0 g Custom tariff number 85389091 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions 11/03/2015   Page 1 / 7 https://www.phoenixcontact.com/us/products/2897758 Bus coupler - IL EIP BK DI8 DO4 2TX-PAC - 2897758 Technical data Dimensions Width 80 mm Height 119.8 mm Depth 71.5 mm Note on dimensions Specfications with connectors Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 General Net weight 320 g Note on weight specifications with connectors Mounting type DIN rail Protection class III, IEC 61140, EN 61140, VDE 0140-1 Conformance with EMC directives Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B; 6 kV contact discharge, 8 kV air discharge Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A; Field intensity: 10 V/m Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A; all interfaces 1 kVCriterion B; all interfaces 2 kV Noise immunity test in accordance with EN 61000-6-2 Transient surge voltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B; supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical); fieldbus cable shield 1 kV Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A; Test voltage 10 V Noise emission test as per EN 61000-6-4 EN 55011 Class A Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 Operation: 25g, 11 ms duration, semi-sinusoidal shock impulse Diagnostics messages Short-circuit / overload of the digital outputs Yes Sensor supply failure Yes Failure of the actuator supply Yes Interfaces Fieldbus system EtherNet/IP™ 11/03/2015   Page 2 / 7 https://www.phoenixcontact.com/us/products/2897758 Bus coupler - IL EIP BK DI8 DO4 2TX-PAC - 2897758 Technical data Interfaces Designation EtherNet/IP™ Connection method RJ45 socket, auto negotiation and auto crossing Transmission speed 10/100 MBit/s (half or full duplex (automatic detection)) Transmission physics Ethernet in RJ45 twisted pair Permissible conductor cross section 0.14 mm² ... 0.22 mm² (twisted pair) Fieldbus system Lokalbus Designation Inline local bus Connection method Inline data jumper Transmission speed 500 kBit/s / 2 MBit/s (Automatic detection, no combined system) System limits of the bus coupler Designation System limits of the bus coupler Amount of process data max. 512 Byte (per station) Number of supported devices max. 63 (per station) Number of local bus devices that can be connected max. 61 (on board I/Os are two devices) Number of devices with parameter channel max. 8 Number of supported branch terminals with remote bus branch 0 Power supply for module electronics Connection method Spring-cage connection Designation Bus coupler supply UBC; Communications power UL (7.5 V) and the analog supply UANA (24 V) are generated from the bus coupler supply. Supply voltage 24 V DC (via Inline connector) Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Supply current typ. 70 mA Current consumption max. 0.98 A (from UBK) Power loss typ. 3 W (entire device) Communications power UL 7.5 V DC Current consumption 0.8 A Power consumption typ. 1.7 W Inline potentials Communications power UL 7.5 V DC ±5 % Power supply at UL max. 0.8 A DC Main circuit supply UM 24 V DC Supply voltage range UM 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Power supply at UM max. 8 A DC (Sum of UM + US) Current consumption from UM max. 8 A DC Segment supply voltage US 24 V DC 11/03/2015   Page 3 / 7 https://www.phoenixcontact.com/us/products/2897758 Bus coupler - IL EIP BK DI8 DO4 2TX-PAC - 2897758 Technical data Inline potentials Supply voltage range US 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Power supply at US max. 8 A DC (Sum of UM + US) Current consumption from US max. 8 A DC I/O supply voltage UANA 24 V DC Supply voltage range UANA 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Power supply at UANA max. 0.5 A DC Digital inputs Input name Digital inputs Connection method Inline connector 2, 3-wire Number of inputs 8 (EN 61131-2 type 1) Typical response time approx. 500 µs Protective circuit Protection against polarity reversal Suppressor diode Input voltage 24 V DC Input voltage range "0" signal -30 V DC ... 5 V DC Input voltage range "1" signal 15 V DC ... 30 V DC Nominal input current at UIN typ. 3 mA Typical input current per channel typ. 3 mA Delay at signal change from 0 to 1 1.2 ms Delay at signal change from 1 to 0 1.2 ms Digital outputs Output name Digital outputs Connection method Inline connector 2, 3-wire Number of outputs 4 Protective circuit Short-circuit and overload protection Free running circuit Output voltage 24 V DC -1 V (At nominal current) Nominal output voltage 24 V DC Maximum output current per channel 500 mA Maximum output current per module / terminal block 2A Maximum output current per module 2A Nominal load, inductive 12 VA (1.2 H; 48 Ω) Nominal load, lamp 12 W Nominal load, ohmic 12 W Standards and Regulations 11/03/2015   Page 4 / 7 https://www.phoenixcontact.com/us/products/2897758 Bus coupler - IL EIP BK DI8 DO4 2TX-PAC - 2897758 Technical data Standards and Regulations Conformance with EMC directives Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B; 6 kV contact discharge, 8 kV air discharge Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A; Field intensity: 10 V/m Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A; all interfaces 1 kVCriterion B; all interfaces 2 kV Noise immunity test in accordance with EN 61000-6-2 Transient surge voltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B; supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical); fieldbus cable shield 1 kV Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A; Test voltage 10 V Noise emission test as per EN 61000-6-4 EN 55011 Class A Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B; 6 kV contact discharge, 8 kV air discharge Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A; Field intensity: 10 V/m Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A; all interfaces 1 kVCriterion B; all interfaces 2 kV Noise immunity test in accordance with EN 61000-6-2 Transient surge voltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B; supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical); fieldbus cable shield 1 kV Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A; Test voltage 10 V Noise emission test as per EN 61000-6-4 EN 55011 Class A Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 Operation: 25g, 11 ms duration, semi-sinusoidal shock impulse Connection in acc. with standard CUL Protection class III, IEC 61140, EN 61140, VDE 0140-1 Classifications eCl@ss eCl@ss 4.0 27250203 eCl@ss 4.1 27250203 eCl@ss 5.0 27250203 eCl@ss 5.1 27242608 eCl@ss 6.0 27242608 eCl@ss 7.0 27242608 11/03/2015   Page 5 / 7 https://www.phoenixcontact.com/us/products/2897758 Bus coupler - IL EIP BK DI8 DO4 2TX-PAC - 2897758 Classifications eCl@ss eCl@ss 8.0 27242604 ETIM ETIM 2.0 EC001434 ETIM 3.0 EC001604 ETIM 4.0 EC001604 ETIM 5.0 EC001599 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Recognized  cUL Recognized  11/03/2015   Page 6 / 7 https://www.phoenixcontact.com/us/products/2897758 Bus coupler - IL EIP BK DI8 DO4 2TX-PAC - 2897758 Approvals cULus Recognized  Drawings Connection diagram Dimensional drawing PWR DO4 DI4 DI4 1 2 3 4 119,8 IN6 24 V DC + (US) 1.1 2.1 1.1 2.1 1.1 2.1 3.1 4.1 +24 V 1.2 2.2 1.2 2.2 3.2 4.2 1.3 2.3 1.3 2.3 3.3 4.3 1.4 2.4 1.4 2.4 1.4 2.4 3.4 4.4 24 V DC (UM) + ETHERNET/IP +24 V IN8 71,5 2.2 2.3 OUT2 1.2 1.3 OUT3 24 V DC + (UBK) - Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 11/03/2015   Page 7 / 7