https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PLC-INTERFACE for high switch-on currents, consisting of PLC-BPT.../1 IC/ACT basic terminal block with pushin connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A,
1 N/O contact, input voltage 24 V DC
Your advantages
Direct connection of load return line thanks to actuator version
Efficient connection to system cabling using V8 adapter
Safe isolation according to DIN EN 50178 between coil and contact
Max. inrush current of 130 A
Functional plug-in bridges
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356507370
Weight per Piece (excluding packing)
62.000 g
Custom tariff number
85364190
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Note
Separating plate PLC-ATP must be installed for voltages larger than 250 V
(L1, L2, L3) between identical terminal blocks in adjacent modules.
The PLC-ATP separating plate should be installed for safe isolation
between adjacent modules
09/09/2019 Page 1 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Technical data
Note
The PLC-ATP separating plate is required at the start and end of every
PLC terminal strip.
The system installer must ensure the touch protection of the product (at
voltages > 25 V AC/60 V DC). The product is a built-in device without
protection against direct contact.
Dimensions
Width
14 mm
Height
80 mm
Depth
94 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Maximum altitude
≤ 2000 m
Degree of protection
RT II (Relay)
IP20 (Relay base)
≥ IP54 (Installation location)
Coil side
Nominal input voltage UN
24 V DC
Typical input current at UN
18 mA
Typical response time
8 ms
Typical release time
10 ms
Coil voltage
24 V DC
Protective circuit
Reverse polarity protection Polarity protection diode
Free-wheeling diode Damping diode
Operating voltage display
Yellow LED
Power dissipation for nominal condition
0.43 W
Contact side
Contact type
1 N/O contact
Type of switch contact
Single contact
Contact material
AgSnO2
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for
voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in
adjacent modules. Potential bridging is then carried out with FBST 8-PLC...
or ...FBST 500...)
Minimum switching voltage
12 V (at 100 mA)
Min. switching current
100 mA (at 12 V DC)
Maximum inrush current
80 A (20 ms)
09/09/2019 Page 2 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Technical data
Contact side
130 A (peak, at capacitive load, 230 V AC, 24 μF)
Limiting continuous current
6A
10 A (the value is permissible if both connections 13, both connections 14
and both connections BB are bridged)
Interrupting rating (ohmic load) max.
144 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W
85 W (for 250 V DC)
1500 VA (for 250 V AC)
Interrupting rating (ohmic load) max. bridged
240 W (for 24 V DC. The value is permissible if both connections 13, both
connections 14 and both connections BB are bridged.)
2500 VA (for 250 V AC. The value is permissible if both connections 13,
both connections 14 and both connections BB are bridged.)
Switching capacity min.
1200 mW
Switching capacity
2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
6 A (at 24 V, AC15)
6 A (at 120 V, AC15)
6 A (at 250 V, AC15)
General
Test voltage relay winding/relay contact
4 kV AC (50 Hz, 1 min.)
Operating mode
100% operating factor
Mechanical service life
3x 10 cycles
Mounting position
any
Assembly instructions
In rows with zero spacing
7
Connection data
Connection name
Coil side
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
09/09/2019 Page 3 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Technical data
Connection data 2
Connection name
Contact side
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
Standards and Regulations
Connection in acc. with standard
CUL
Designation
Standards/regulations
Standards/regulations
EN 50178
EN 61810-1
Rated insulation voltage
250 V AC
Rated surge voltage
6 kV
Insulation
Safe isolation, reinforced insulation
Pollution degree
2
Overvoltage category
III
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
09/09/2019 Page 4 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Diagram
Curve A
Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data)
Curve B
Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data)
09/09/2019 Page 5 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Diagram
Interrupting rating
09/09/2019 Page 6 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Diagram
Basic behavior of capacitive loads:
- Very high inrush current
- Voltage increases with an e-function
09/09/2019 Page 7 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Circuit diagram
Articles in set
Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260
14 mm PLC basic terminal block for high switch-on currents with push-in connection, without relay or solid-state relay, for
mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage 24 V DC
Single relay - REL-MR- 24DC/1IC - 2961341
Pluggable miniature power relay, with power contact for high switch-on currents up to 130 A peaks, 1 N/O contact, input
voltage: 24 V DC
09/09/2019 Page 8 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Classifications
eCl@ss
eCl@ss 4.0
27371000
eCl@ss 4.1
27371000
eCl@ss 5.0
27371600
eCl@ss 5.1
27371600
eCl@ss 6.0
27371600
eCl@ss 7.0
27371601
eCl@ss 8.0
27371601
eCl@ss 9.0
27371601
ETIM
ETIM 2.0
EC001437
ETIM 3.0
EC001437
ETIM 4.0
EC001437
ETIM 5.0
EC001437
ETIM 6.0
EC001437
ETIM 7.0
EC001437
UNSPSC
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 11
39121515
UNSPSC 12.01
39121515
UNSPSC 13.2
39122334
Approvals
Approvals
Approvals
DNV GL / UL Listed / UL Recognized / cUL Recognized / cUL Listed / EAC / cULus Recognized / cULus Listed
Ex Approvals
Approval details
09/09/2019 Page 9 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Approvals
DNV GL
https://approvalfinder.dnvgl.com/
TAE0000196-02
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 172140
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 172140
EAC
TR_TS_D_00573_c
cULus Recognized
cULus Listed
Accessories
Accessories
Bridge
09/09/2019 Page 10 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Accessories
Continuous plug-in bridge - FBST 500-PLC RD - 2966786
Continuous plug-in bridge, length: 500 mm, color: red
Continuous plug-in bridge - FBST 500-PLC BU - 2966692
Continuous plug-in bridge, length: 500 mm, color: blue
Continuous plug-in bridge - FBST 500-PLC GY - 2966838
Continuous plug-in bridge, length: 500 mm, color: gray
Single plug-in bridge - FBST 6-PLC RD - 2966236
Single plug-in bridge, length: 6 mm, number of positions: 2, color: red
Single plug-in bridge - FBST 6-PLC BU - 2966812
Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue
09/09/2019 Page 11 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Accessories
Single plug-in bridge - FBST 6-PLC GY - 2966825
Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray
Single plug-in bridge - FBST 8-PLC GY - 2967688
Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray
Single plug-in bridge - FBST 14-PLC BK - 2967691
Single plug-in bridge, length: 14 mm, number of positions: 2, color: black
Controller board
System connection - PLC-V8L/FLK14/OUT - 2299660
V8 adapter for 8 x PLC-INTERFACE (14 mm), controller: PLC system cabling of output cards, connection 1: Screw
connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto 8x
PLC-INTERFACE terminals), number of channels: 8, control logic: positive switching
System connection - PLC-V8L/FLK14/OUT/M - 2304306
V8 adapter for 8 x PLC-INTERFACE (14 mm), controller: PLC system cabling of output cards, connection 1: Screw
connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto 8x
PLC-INTERFACE terminals), number of channels: 8, control logic: negative switching
09/09/2019 Page 12 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Accessories
DIN rail
DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Stainless steel V2A,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
09/09/2019 Page 13 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
Labeled terminal marker
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 991 ... 1000, mounting type: snap into tall marker groove, for terminal block width:
10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
09/09/2019 Page 14 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Accessories
Partition plate
Separating plate - PLC-ATP BK - 2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
Power module
Power terminal block - PLC-ESK GY - 2966508
Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB10/WH-100:UNBEDRUCKT - 5060883
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap
into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual
labels: 1000
09/09/2019 Page 15 / 17
https://www.phoenixcontact.com/us/products/2900298
Relay Module - PLC-RPT- 24DC/ 1IC/ACT - 2900298
Accessories
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual
labels: 10
Marker for terminal blocks - UC-TM 12 - 0819194
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40
Marker for terminal blocks - UCT-TM 12 - 0829144
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size:
10.8 x 9.6 mm, Number of individual labels: 30
Spare parts
Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260
14 mm PLC basic terminal block for high switch-on currents with push-in connection, without relay or solid-state relay, for
mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage 24 V DC
Single relay - REL-MR- 24DC/1IC - 2961341
Pluggable miniature power relay, with power contact for high switch-on currents up to 130 A peaks, 1 N/O contact, input
voltage: 24 V DC
09/09/2019 Page 16 / 17
https://www.phoenixcontact.com/us/products/2900298
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
09/09/2019 Page 17 / 17
