2900311

https://www.phoenixcontact.com/us/products/2900311 Relay Module - PLC-RPT-230UC/21AU - 2900311 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 230 V AC/220 V DC Product Features ■ ■ ■ ■ ■ ■ Slim design Efficient connection to system cabling using V8 adapter RT III sealed relay Safe isolation according to DIN EN 50178 between coil and contact Integrated input circuit and interference suppression circuit Functional plug-in bridges Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 36.0 g Custom tariff number 85364900 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 80 mm Depth 94 mm Ambient conditions 03/14/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2900311 Relay Module - PLC-RPT-230UC/21AU - 2900311 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 55 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 230 V AC 220 V DC Typical input current at UN 3.2 mA (at UN = 230 V AC) 3 mA (at UN = 220 V DC) Typical response time 7 ms Typical release time 15 ms Protective circuit Bridge rectifier Bridge rectifier Operating voltage display Yellow LED Power dissipation for nominal condition 0.74 W Contact side Contact type 1 PDT Contact material AgSnO, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Minimum switching voltage 100 mV (at 10 mA) Min. switching current 1 mA (at 24 V) Maximum inrush current 50 mA Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (at 100 mA) Limiting continuous current 6A Min. switching current 10 mA (at 12 V) Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 20 W (at 48 V DC) 18 W (at 60 V DC) 23 W (at 110 V DC) 40 W (at 220 V DC) 1500 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.1 A (at 220 V, DC13) 03/14/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2900311 Relay Module - PLC-RPT-230UC/21AU - 2900311 Technical data Contact side 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 230 V, AC15) Connection data input side Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 Connection data output side Connection name Contact side Connection method Push-in connection Stripping length 8 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section AWG 26 ... 14 General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection RT III (Relay) Mechanical service life 2 x 10 cycles Flammability rating according to UL 94 V0 Designation Standards/regulations Standards/regulations IEC 60664 7 IEC 60664A DIN VDE 0110 DIN EN 50178/DIN VDE 0160 (in relevant parts) DIN EN 50178/VDE 0160 IEC 60255/DIN VDE 0435 (in relevant parts) Degree of pollution 3 Overvoltage category III Mounting position any Assembly instructions In rows with zero spacing Standards and Regulations 03/14/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2900311 Relay Module - PLC-RPT-230UC/21AU - 2900311 Technical data Standards and Regulations Connection in acc. with standard CUL Designation Standards/regulations Standards/regulations IEC 60664 IEC 60664A DIN VDE 0110 DIN EN 50178/DIN VDE 0160 (in relevant parts) DIN EN 50178/VDE 0160 IEC 60255/DIN VDE 0435 (in relevant parts) Degree of pollution 3 Overvoltage category III Flammability rating according to UL 94 V0 Articles in set Relay socket - PLC-BPT-230UC/21 - 2900281 6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 230 V AC/DC     Single relay - REL-MR- 60DC/21AU - 2961134 Plug-in miniature power relay, with multi-layer gold contact, 1 PDT, input voltage 60 V DC     Classifications eCl@ss eCl@ss 4.0 27371001 eCl@ss 4.1 27371001 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 03/14/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2900311 Relay Module - PLC-RPT-230UC/21AU - 2900311 Classifications eCl@ss eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 3.0 EC000196 ETIM 4.0 EC000196 ETIM 5.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39121515 Approvals Approvals Approvals UL Recognized / UL Listed / cUL Recognized / cUL Listed / GL / EAC / RC FRT / EAC / cULus Recognized / cULus Listed Ex Approvals Approvals submitted Approval details UL Recognized  UL Listed  03/14/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2900311 Relay Module - PLC-RPT-230UC/21AU - 2900311 Approvals cUL Recognized  cUL Listed  GL  EAC  RC FRT  EAC  cULus Recognized  cULus Listed  Drawings Circuit diagram A2 11 A1 14 12 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/14/2016   Page 6 / 6