2900576

https://www.phoenixcontact.com/us/products/2900576 Hybrid motor starter - ELR H5-I-SC- 24DC/500AC-9 - 2900576 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage, adjustable overload shutdown, and screw connection. Product Features ■ ■ ■ ■ ■ ■ 22.5 mm wide Space saving Long service life Reduction in wiring Bimetal function can be set up to 9 A 3-phase loop bridges Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 280.0 g Custom tariff number 85371099 Country of origin Germany Technical data Dimensions Width 22.5 mm Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -25 °C ... 70 °C (observe derating) Ambient temperature (storage/transport) -40 °C ... 80 °C Degree of protection IP20 04/11/2016   Page 1 / 8 https://www.phoenixcontact.com/us/products/2900576 Hybrid motor starter - ELR H5-I-SC- 24DC/500AC-9 - 2900576 Technical data Device supply Rated control circuit supply voltage US 24 V DC Control supply voltage range 19.2 V DC ... 30 V DC Rated control supply current IS 40 mA Protective circuit Reverse polarity protection Parallel polarity protection diode Surge protection Input data Input name Control input right/left Rated actuating voltage UC 24 V DC Voltage range 19.2 V DC ... 30 V DC Rated actuating current IC 5 mA Switching threshold 9.6 V (“0” signal) 19.2 V (“1” signal) Protective circuit Reverse polarity protection Typical turn-off time < 30 ms Output data load output Output name AC output Rated operating voltage Ue 500 V AC Operating voltage range 42 V AC ... 550 V AC Load current range 1.5 A ... 9 A (see to derating) Trigger characteristic in acc. with IEC 60947 Class 10A Cooling time 20 min. (for auto reset) Rated operating current at AC-51 9A Rated operating current at AC-53a 6.5 A Leakage current 0 mA Protective circuit Surge protection Varistor Output data reply output Output name Acknowledge output Note Confirmation: floating change-over contact, signal contact Contact type 1 PDT Switching capacity according to IEC 60947-5-1 3 A (230 V, AC15) 2 A (24 V, DC13) Overspeed tripping Operate threshold > 45 A Response time 20 mm spacing = aligned without spacing 10 20 30 40 R L & Error 97 96 95 2/T1 4/T2 6/T3 Derating diagram 04/11/2016   Page 6 / 8 https://www.phoenixcontact.com/us/products/2900576 Hybrid motor starter - ELR H5-I-SC- 24DC/500AC-9 - 2900576 Circuit diagram L1 L2 L3 Circuit diagram +24V DC F1 F2 F3 F5 F4 T1 T2 K1 K2 K2 K1 F4 M 3~ M1 K1 K2 GND PE Conventional structure Main current path contactor K1 = Left contactor K2 = Right contactor F4 = Motor protection relay Conventional structure Control current path contactor K1 = Left contactor K2 = Right contactor T1 = Left, T2 = Right F4 = Motor protection relay Circuit diagram F1 L1 F2 L2 F3 L3 +24V DC L1 L2 L3 K1 T1 T2 T3 M 3~ M1 T1 T2 K1 +US R L PE GND Structure with CONTACTRON , , Main and control current path for 3 in 1 hybrid motor starter 04/11/2016   Page 7 / 8 https://www.phoenixcontact.com/us/products/2900576 Hybrid motor starter - ELR H5-I-SC- 24DC/500AC-9 - 2900576 , , K1 = 3 in 1 hybrid motor starter T1 = Right, T2 = Left Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/11/2016   Page 8 / 8