FL-PP-RJ45... / FL CAT5...
Ethernet patch panel
Data Sheet
104622_en_04
1
© PHOENIX CONTACT 2014-10-14
Description
The patch panels FL-PP-RJ45... / FL CAT5... provide the
transition from the field cabling to the cabling inside the control cabinet.
The connection from the patch panel to the termination device takes place via the RJ45 socket. Pre-assembled patch
cables in different connection lengths from 0.24 m to 20 m
are available for this.
The field cabling is applied easily to spring-cage, screw, or
LSA connection terminal blocks, depending on the version.
The individual terminal blocks are clearly labeled for connection according to Ethernet standard TIA 568 A and B as
well as PROFINET. There is no longer any need to spend
time and effort crimping an RJ45 connector to the field line.
Features
–
–
–
–
–
–
–
–
–
CAT5e
8-pin assignment: 1:1
10/100/1000 Mbps
Mounting on a DIN rail
Safe connection to ground potential
FL-PP-RJ45/RJ45-B with extended temperature range
-40 °C ... 85 °C
Several modes for attaching field cables:
– Spring-cage connection terminal blocks
– Screw connection terminal blocks
– LSA connection terminal blocks
– RJ45-RJ45 transition
ATEX approval for the following patch panels:
– FL-PP-RJ45-SCC
– FL-PP-RJ45-SC
– FL-PP-RJ45/RJ45
Shipbuilding approval according to DNV for the following patch panel:
– FL-PP-RJ45-SCC
– FL-PP-RJ45-SC
– FL-PP-RJ45-LSA
– FL-PP-RJ45/RJ45
– FL CAT5 TERMINAL BOX
Make sure you always use the latest documentation.
It can be downloaded at phoenixcontact.net/products.
This data sheet is valid for all products listed on the following page:
FL-PP-RJ45... / FL CAT5...
2
Table of contents
1
Description.................................................................................................................................. 1
2
Table of contents ........................................................................................................................ 2
3
Ordering data.............................................................................................................................. 3
4
Technical data ........................................................................................................................... 5
5
Safety regulations and installation notes..................................................................................... 6
5.1
6
Patch panel FL-PP-RJ45-SCC with spring-cage connection terminal blocks ............................. 7
6.1
6.2
6.3
7
Design ............................................................................................................................................................ 8
Dimensions .................................................................................................................................................... 8
Connecting the Ethernet network ................................................................................................................... 8
Patch panel FL-PP-RJ45-LSA with LSA connection terminal blocks .......................................... 9
8.1
8.2
8.3
9
Design ............................................................................................................................................................ 7
Dimensions .................................................................................................................................................... 7
Connecting the Ethernet network ................................................................................................................... 7
Patch panel FL-PP-RJ45-SC with screw connection terminal blocks ......................................... 8
7.1
7.2
7.3
8
Safety regulations for installation in potentially explosive areas (only FL-PP-RJ45-SCC, FL-PP-RJ45-SC, and
FL-PP-RJ45/RJ45) ......................................................................................................................................... 6
Design ............................................................................................................................................................ 9
Dimensions .................................................................................................................................................... 9
Connecting the Ethernet network ................................................................................................................... 9
Patch panel FL-PP-RJ45/RJ45 with RJ45 socket ......................................................................10
9.1
9.2
9.3
Design .......................................................................................................................................................... 10
Dimensions .................................................................................................................................................. 10
Connecting the Ethernet network ................................................................................................................. 10
10 Patch panel FL-PP-RJ45/RJ45-B with RJ45 socket, slim design width .....................................11
10.1
10.2
Dimensions .................................................................................................................................................. 11
Connecting the Ethernet network ................................................................................................................. 11
11 Patch panel FL CAT5 TERMINAL BOX with screw connection terminal blocks.........................12
11.1
11.2
11.3
Design .......................................................................................................................................................... 12
Dimensions .................................................................................................................................................. 12
Connecting the Ethernet network ................................................................................................................. 12
12 Shield grounding selection.........................................................................................................13
13 Circuit diagrams ................................................................................................................................................... 13
104622_en_04
PHOENIX CONTACT
2
FL-PP-RJ45... / FL CAT5...
3
Ordering data
Products
Description
Type
Order No.
Pcs. / Pkt.
Patch panel, one RJ45 socket to 8 spring-cage connection terminal blocks
(1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail mounting, IP20, option
of shield contacting on DIN rail via jumpers
FL-PP-RJ45-SCC
2901642
1
Patch panel, one RJ45 socket to 8 screw connection terminal blocks
(1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail mounting, IP20, option
of shield contacting on DIN rail via jumpers
FL-PP-RJ45-SC
2901643
1
Patch panel, one RJ45 socket to 8 LSA connection terminal blocks
(1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail mounting, IP20, option
of shield contacting on DIN rail via jumpers
FL-PP-RJ45-LSA
2901645
1
Patch panel, two RJ45 sockets (1:1 assignment), CAT5e, 10/100/1000 Mbps,
DIN rail mounting, IP20, option of shield contacting on DIN rail via jumpers
FL-PP-RJ45/RJ45
2901646
1
Patch panel, slim design width, extended temperature range, two RJ45 sock- FL-PP-RJ45/RJ45-B
ets, 1:1 assignment, continuous shield, CAT5, 10/100/1000 Mbps, DIN rail
mounting, IP20
2904933
1
Patch panel, one RJ45 socket to 4 screw connection terminal blocks (assign- FL CAT5 TERMINAL BOX
ment 1, 2, 3, 6), CAT5, 10/100 Mbps, DIN rail mounting, IP20, shield contacting on DIN rail
2744610
1
Type
Order No.
Pcs. / Pkt.
Passive network isolator for electrical isolation in Ethernet networks. For the
protection of Ethernet devices against potential differences up to 4 kV. Can be
used for transmission speeds of up to 100 Mbps. Connection via RJ45 and
COMBICON plug-in screw terminal block.
FL ISOLATOR 100-RJ/SC
2313928
1
Passive network isolator for electrical isolation in Ethernet networks. For the
protection of Ethernet devices against potential differences up to 4 kV. Can be
used for transmission speeds of up to 100 Mbps. Connection for two RJ45
connectors possible.
FL ISOLATOR 100-RJ/RJ
2313931
1
Passive network isolator for electrical isolation in Ethernet networks. For the
protection of Ethernet devices against potential differences up to 4 kV. Can be
used for transmission speeds of up to 1 Gbps. Connection for two RJ45 connectors possible.
FL ISOLATOR 1000-RJ/RJ
2313915
1
Passive network isolator for electrical isolation in Ethernet networks. For the
protection of Ethernet devices against potential differences up to 4 kV. Can be
used for transmission speeds up to 100 Mbps. Ethernet connection via two
M12 sockets (D-coded).
FL ISOLATOR 100-M12
2902985
1
2904671
1
10
Accessories
Description
Network isolators
Passive network isolator with pre-installed adapter for mounting on a DIN rail. FL ISOLATOR 100-M12 RMS
Electrical isolation in Ethernet networks. For protection against potential differences up to 4 kV. Transmission speed of up to 100 Mbps. M12 socket
(D-coded).
Patch cables, CAT5
Pre-assembled, 0.24 m
FL CAT5 PATCH 0.24
2700301
Pre-assembled, 0.3 m
FL CAT5 PATCH 0.3
2832250
10
Pre-assembled, 0.5 m
FL CAT5 PATCH 0.5
2832263
10
Pre-assembled, 1.0 m
FL CAT5 PATCH 1.0
2832276
10
Pre-assembled, 1.5 m
FL CAT5 PATCH 1.5
2832221
10
Pre-assembled, 2.0 m
FL CAT5 PATCH 2.0
2832289
10
Pre-assembled, 3.0 m
FL CAT5 PATCH 3.0
2832292
10
Pre-assembled, 5.0 m
FL CAT5 PATCH 5.0
2832580
10
Pre-assembled, 7.5 m
FL CAT5 PATCH 7.5
2832616
10
Pre-assembled, 10.0 m
FL CAT5 PATCH 10.0
2832629
10
104622_en_04
PHOENIX CONTACT
3
FL-PP-RJ45... / FL CAT5...
Description
Patch cables, CAT6
Type
Order No.
Pcs. / Pkt.
Pre-assembled, 0.3 m
FL CAT6 PATCH 0.3
2891181
10
Pre-assembled, 0.5 m
FL CAT6 PATCH 0.5
2891288
10
Pre-assembled, 1.0 m
FL CAT6 PATCH 1.0
2891385
10
Pre-assembled, 1.5 m
FL CAT6 PATCH 1.5
2891482
10
Pre-assembled, 2.0 m
FL CAT6 PATCH 2.0
2891589
10
Pre-assembled, 3.0 m
FL CAT6 PATCH 3.0
2891686
10
Pre-assembled, 5.0 m
FL CAT6 PATCH 5.0
2891783
10
Pre-assembled, 7.5 m
FL CAT6 PATCH 7.5
2891880
10
Pre-assembled, 10 m
FL CAT6 PATCH 10
2891877
10
Pre-assembled, 12.5 m
FL CAT6 PATCH 12.5
2891369
5
Pre-assembled, 15.0 m
FL CAT6 PATCH 15.0
2891372
5
Pre-assembled, 20.0 m
FL CAT6 PATCH 20.0
2891576
5
CAT5-SF/UTP cable (J-02YS(ST)C HP 2 x 2 x 24 AWG), heavy-duty installa- FL CAT5 HEAVY
tion cable 2 x 2 x 0.22 mm², solid conductor, shielded, outer sheath: 7.8 mm
diameter, inner sheath: 5.75 mm ± 0.15 mm diameter, (length in meters
according to customer requirements)
2744814
1
CAT5-SF/UTP cable (J-02YS(ST)C HP 2 x 2 x 24 AWG), heavy-duty installa- FL CAT5 HEAVY CONF/
tion cable 2 x 2 x 0.22 mm², solid conductor, shielded, outer sheath: 7.8 mm
diameter, inner sheath: 5.75 mm ± 0.15 mm diameter, pre-assembled on both
sides with RJ45 connector, crossover or line (length in meters according to
customer requirements)
2744827
1
CAT5-SF/UTP cable (J-LI02YS(ST)C H 2 x 2 x 26 AWG), light-duty, flexible in- FL CAT5 FLEX
stallation cable 2 x 2 x 0.14 mm², fine strand, shielded, outer sheath: 5.75 mm
± 0.15 mm diameter (length in meters according to customer requirements)
2744830
1
CAT5-SF/UTP cable (J-LI02YS(ST)C H 2 x 2 x 26 AWG), light-duty, flexible in- FL CAT5 FLEX CONF/
stallation cable 2 x 2 x 0.14 mm², fine strand, shielded, outer sheath: 5.75 mm
± 0.15 mm diameter, pre-assembled on both sides with RJ45 connector,
crossover or line assignment (length in meters according to customer requirements)
2744843
1
CAT5-SF/UTP cables
Tools
Crimping pliers, for assembling the RJ45 connectors FL PLUG RJ45..., for
onsite assembly
FL CRIMPTOOL
2744869
1
Actuation tool, for ST terminal blocks, also suitable for use as a flat-bladed
screwdriver, size: 0.4 x 2.5 x 75 mm, 2-component handle, with non-slip grip
SZF 0-0.4X2.5
1204504
1
Punch tool for connecting cables to LSA-Plus terminal strips
CT-WZ/A
2765505
1
Stripping tool, for the multi-stage stripping of shielded cables
VS-CABLE-STRIP-VARIO
1657407
1
104622_en_04
PHOENIX CONTACT
4
FL-PP-RJ45... / FL CAT5...
4
Technical data
Ethernet interface
FL-PP-RJ45SCC
FL-PP-RJ45SC
Connection
Spring connection
Screw connection
LSA
RJ45
RJ45
6 ... 10 mm
6 ... 10 mm
6 ... 10 mm
-
-
6 ... 10 mm
Conductor cross section,
solid
0.2 ... 1.5 mm2
0.14 ... 1.5 mm2
0.128...0.325 mm2
-
-
0.14 ... 1.5 mm2
Conductor cross section,
stranded
0.2 ... 1.0 mm2
0.14 ... 1.0 mm2
0.128...0.325 mm2
-
-
0.14 ... 1.0 mm2
24 ... 16
26 ... 16
26 ... 22
-
-
26 ... 16
1 :1
1 :1
1 :1
1 :1
1 :1
1, 2, 3, 6
Cable diameter
AWG
Pin assignment
Connection
Transmission speed
FL-PP-RJ45LSA
FL-PP-RJ45/
RJ45
FL-PP-RJ45/
RJ45-B
FL CAT5
TERMINAL
BOX
Screw connection
RJ45 CAT5 e
RJ45 CAT5
10/100/1000 Mbps
10/100 Mbps
Transmission length
100 m (incl. patch cables)
Cable impedance
100 Ω
Insertion/withdrawal cycles
≤ 2500
General data
Degree of protection
Weight
Dimensions W / H / D
IP20
45 g
55 g
55 g
39 g
33 g
39 g
29 x 90 x 53 mm
29 x 90 x 53 mm
29 x 90 x 53 mm
29 x 90 x 53 mm
22.5 x 78 x 44 mm
25 x 90 x 52 mm
Housing material
PVC/PA
Current consumption
