2901911

https://www.phoenixcontact.com/us/products/2901911 Single relay - REL-OR/L- 24AC/1 - 2901911 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug-in octal relay with power contacts, specially designed for switching high DC loads, 1 N/O contact, detectable manual operation, status LED, coil voltage: 24 V AC Product Features     Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 94.0 GRM Custom tariff number 85364190 Country of origin India Technical data Dimensions Width 35 mm Height 35 mm Depth 58.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Coil side Nominal input voltage UN 24 V AC Input voltage range in reference to UN see diagram Typical input current at UN 100 mA Typical response time 5 ms ... 20 ms (depending on phase relation) Typical release time range 5 ms ... 20 ms (depending on phase relation) 05/15/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/2901911 Single relay - REL-OR/L- 24AC/1 - 2901911 Technical data Coil side Coil resistance 65 Ω ±10 % Operating voltage display Yellow LED Contact side Contact type Single contact, 1 N/O contact (series connection, 2 N/O contacts) Contact material AgNi Maximum switching voltage 250 V AC 220 V DC Minimum switching voltage 10 V (at 10 mA) Maximum inrush current 30 A (20 ms) Min. switching current 10 mA (at 10 V) Limiting continuous current 10 A Interrupting rating (ohmic load) max. 2500 VA (for 250 V AC) Switching capacity in acc. with DIN VDE 0660/IEC 60947 1.2 A (110 V (DC13)) 0.3 A (220 V DC/230 V AC (DC13)) 6 A (220 V DC/230 V AC (AC15)) General Test voltage relay winding/relay contact 2.5 kVrms (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection RT I Mechanical service life Approx. 10 cycles Standards/regulations IEC 61810 7 EN 60947 Pollution degree 3 Surge voltage category III Mounting position any Assembly instructions On relay base PR3 Classifications eCl@ss eCl@ss 4.0 27371104 eCl@ss 4.1 27371104 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 05/15/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/2901911 Single relay - REL-OR/L- 24AC/1 - 2901911 Classifications eCl@ss eCl@ss 8.0 27371601 ETIM ETIM 3.0 EC000196 ETIM 4.0 EC000196 ETIM 5.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39121515 Approvals Approvals Approvals UL Recognized / cUL Recognized / cUL Recognized / UL Recognized / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  05/15/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/2901911 Single relay - REL-OR/L- 24AC/1 - 2901911 Approvals cUL Recognized  UL Recognized  EAC  cULus Recognized  Drawings Circuit diagram Diagram 2,0 14 " 12 22 11 U/UN A1 1,5 21 # 31 24 1,0 A2 34 32 ! 0,5 0 10 20 30 40 50 60 70 Ambient temperature [°C] 1 Maximum operating voltage without load current (0 A) 2 Maximum operating voltage at limiting continuous current (10 A) 3 Minimum pick-up voltage without pre-excitation Operating voltage range of the relay 05/15/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/2901911 Single relay - REL-OR/L- 24AC/1 - 2901911 Diagram Switching current [A] 20 ! 10 6 4 2 1 " 0,5 0,3 0,2 0,1 10 20 30 ! DC, ohmic load " L/R = 40 ms 50 70 100 200 Switching voltage [V] 300 DC interrupting rating Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 05/15/2015   Page 5 / 5