https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Eight MINI Analog Pro signal conditioners and measuring transducers can be connected to a controller with
minimal cabling effort and without any errors using system adapters and system cabling.
Product Description
Thanks to its innovative plug-in concept, the system adapter offers a time-saving wiring solution. Eight MINI Analog Pro-signal converters are easily
connected to a control unit using pluggable system cabling. This leads to a considerable reduction in cabling effort and the risk of wiring errors,
compared to PLC-side single-conductor wiring.
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4046356651813
Weight per Piece (excluding packing)
135.000 g
Custom tariff number
85389099
Country of origin
Germany
Note
Made to Order (non-returnable)
Technical data
Dimensions
Width
51.1 mm
Height
104.1 mm
Depth
56.8 mm
Input data
Number of inputs
8
Configurable/programmable
no
Maximum input current
4 A (500 mA per ch.)
Maximum input voltage
30 V
04/16/2018 Page 1 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Technical data
Output data
Number of outputs
8
Configurable/programmable
no
General
Degree of protection
IP20 (Finger safety)
Overvoltage category
II
Degree of pollution
2
Rated insulation voltage
50 Vrms
Housing material
PBT 7% GF V0
Mounting position
any
Connection data
Connection name
Output
Connection method
IDC/FLK pin strip
Number of positions
16
Ambient conditions
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Permissible humidity (operation)
5 % ... 95 %
Permissible humidity (storage/transport)
5 % ... 95 %
Maximum altitude
4000 m
Standards and Regulations
Conformance
CE-compliant
ATEX
II 3 G Ex nA IIC Gc U
UL, USA/Canada
UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T5
Class I, Zone 2, Group IIC T5
GL
GL applied for
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
04/16/2018 Page 2 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Block diagram
PLC/DCS
Sensor/Field
2-wire
Us
IN
3-wire
OUT
4-wire
MINI MCR-2-...
MINI MCR-2-...
MINI MCR-2-...
MINI MCR-2-...
MINI MCR-2-...
MINI MCR-2-...
MINI MCR-2-...
MINI MCR-2-...
-
-
-
+
+
+
MINI MCR-2-V8-...
8 x IN
FLK 16
PLC
Classifications
eCl@ss
eCl@ss 4.0
27250313
eCl@ss 4.1
27250313
eCl@ss 5.0
27250313
eCl@ss 5.1
27250313
eCl@ss 7.0
27141152
eCl@ss 8.0
27141152
eCl@ss 9.0
27141152
ETIM
ETIM 5.0
EC002780
ETIM 6.0
EC002780
UNSPSC
UNSPSC 6.01
26121604
UNSPSC 7.0901
26121604
UNSPSC 11
26121604
UNSPSC 12.01
26121604
UNSPSC 13.2
26121620
Approvals
Approvals
Approvals
UL Listed / cUL Listed / cULus Listed
Ex Approvals
UL Listed / cUL Listed / ATEX / cULus Listed
Approval details
04/16/2018 Page 3 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Approvals
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cULus Listed
Accessories
Accessories
Device marking
Marker for end clamp - UCT-EM (30X5) - 0801505
Marker for end clamp, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD,
BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snapped into marker carrier, lettering field
size: 30 x 5 mm
Marker for end clamp - UCT-EM (30X5) YE - 0830340
Marker for end clamp, Sheet, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, mounting type: snapped into marker carrier,
lettering field size: 30 x 5 mm
Plastic label - UC-EMLP (15X5) - 0819301
Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm
04/16/2018 Page 4 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Plastic label - UC-EMLP (15X5) YE - 0822615
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label - UC-EMLP (15X5) SR - 0828095
Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1PLOTTER, PLOTMARK, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) - 0828790
Plastic label, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting
type: adhesive, lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) YE - 0828873
Plastic label, Card, yellow, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD,
mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) SR - 0828874
Plastic label, Card, silver, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, mounting
type: adhesive, lettering field size: 15 x 5 mm
DIN rail connector
04/16/2018 Page 5 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Evaluation unit
Monitoring module - MINI MCR-2-FM-RC - 2904504
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the
FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology,
standard configuration
Monitoring module - MINI MCR-2-FM-RC-PT - 2904508
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM
system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology,
standard configuration
Monitoring module - MINI MCR-2-FM-RC - 2904504
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the
FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology,
standard configuration
Monitoring module - MINI MCR-2-FM-RC-PT - 2904508
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM
system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology,
standard configuration
Feed-through terminal block
04/16/2018 Page 6 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Feed-through terminal block - MINI MCR-2-TB - 2902068
Feed-through terminal block with plug-in connection technology for the transmission of signals already electrically
isolated. Screw connection technology
Feed-through terminal block - MINI MCR-2-TB - 2902068
Feed-through terminal block with plug-in connection technology for the transmission of signals already electrically
isolated. Screw connection technology
Frequency transducer
Frequency transducer - MINI MCR-2-UI-FRO-PT - 2902032
Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard
signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology,
standard configuration.
Frequency transducer - MINI MCR-2-UI-FRO - 2902031
Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard
signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology,
standard configuration.
Frequency transducer - MINI MCR-2-UI-FRO-PT-C - 2906202
Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard
signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology,
order configuration.
04/16/2018 Page 7 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Frequency transducer - MINI MCR-2-UI-FRO-C - 2906201
Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard
signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, order
configuration.
Frequency transducer - MINI MCR-2-F-UI - 2902056
Universally configurable frequency transducer for converting frequency and PWM signals into standard signals.
Sensor voltages greater than 8.2 V DC are possible in combination with MINI MCR-2-SPS 1033202. Screw
connection technology.
Frequency transducer - MINI MCR-2-F-UI-PT - 2902058
Universally configurable frequency transducer for converting frequency and PWM signals into standard signals.
Sensor voltages greater than 8.2 V DC are possible in combination with MINI MCR-2-SPS-PT 1033201. Push-in
connection technology.
Front adapter
Front adapters - FLKM 16-PA-S300/MINI-MCR - 2314749
®
VARIOFACE front adapter, for SIMATIC S7-300, only in connection with MINI MCR-SL-V8-FLK 16-A. Connectable
cards: 331-7KF02-0AB0, 331-7KB02-0AB0 und 331-7TF0-0AB01.
Front adapters - CABLE-40/2FLK16/ 2,0M/YUC - 2321334
Cast Yokogawa front adapter with attached round cable and an injection-molded 40-pos. socket strip for the
connection of 2 x 8 channels on the field side. Cable length: 2.0 m
04/16/2018 Page 8 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Front adapters - CABLE-40/2FLK16/ 4,0M/YUC - 2321347
Cast Yokogawa front adapter with attached round cable and an injection-molded 40-pos. socket strip for the
connection of 2 x 8 channels on the field side. Cable length: 4.0 m
Front adapters - CABLE-40/2FLK16/10,0M/YUC - 2321350
Cast Yokogawa front adapter with attached round cable and an injection-molded 40-pos. socket strip for the
connection of 2 x 8 channels on the field side. Cable length: 10.0 m
Front adapters - CABLE-40/2FLK16/15,0M/YUC - 2321376
Cast Yokogawa front adapter with attached round cable and an injection-molded 40-pos. socket strip for the
connection of 2 x 8 channels on the field side. Cable length: 15.0 m
Front adapters - CABLE-40/2FLK16/20,0M/YUC - 2321363
Cast Yokogawa front adapter with attached round cable and an injection-molded 40-pos. socket strip for the
connection of 2 x 8 channels on the field side. Cable length: 20.0 m
Isolating switch transf.
Isolation amplifier - MINI MCR-2-NAM-2RO-PT - 2902005
Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch
contacts, and switch contacts with resistance circuit. 2 transistor outputs. Configurable via DIP switch. Push-in
connection technology.
04/16/2018 Page 9 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Isolation amplifier - MINI MCR-2-NAM-2RO - 2902004
Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch
contacts, and switch contacts with resistance circuit. 2 transistor outputs, configurable via DIP switch. Screw
connection technology.
Labeled device marker
Marker for end clamp - UCT-EM (30X5) CUS - 0801589
Marker for end clamp, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 30 x 5 mm
Marker for end clamp - UCT-EM (30X5) YE CUS - 0830348
Marker for end clamp, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 30 x 5 mm
Plastic label - UC-EMLP (15X5) CUS - 0824550
Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - UC-EMLP (15X5) YE CUS - 0824551
Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type:
adhesive, lettering field size: 15 x 5 mm
04/16/2018 Page 10 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Plastic label - UC-EMLP (15X5) SR CUS - 0828099
Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) CUS - 0830076
Plastic label, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) YE CUS - 0830077
Plastic label, can be ordered: By card, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - US-EMLP (15X5) SR CUS - 0830078
Plastic label, can be ordered: By card, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Potiposition transducer
Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT - 2902017
Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0
Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. push-in connection technology, standard
configuration
04/16/2018 Page 11 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Resistance/potiposition transducer - MINI MCR-2-POT-UI - 2902016
Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0
Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. Screw connection technology, standard
configuration
Resistance/potiposition transducer - MINI MCR-2-POT-UI-PT-C - 2905006
Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ...
100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. Push-in connection technology, order configuration
Resistance/potiposition transducer - MINI MCR-2-POT-UI-C - 2905005
Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ...
100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. Screw connection technology, order configuration
Power module
Power terminal block - MINI MCR-2-PTB - 2902066
Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector.
Monitoring of the supply voltages in combination with the fault monitoring module. Screw connection technology
Power terminal block - MINI MCR-2-PTB-PT - 2902067
Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector.
Monitoring of the supply voltages in combination with the fault monitoring module. Push-in connection technology
Programming adapter
04/16/2018 Page 12 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Adapter - IFS-BT-PROG-ADAPTER - 2905872
Bluetooth adapter with micro USB and S-PORT interface for wireless communication with the MINI Analog,
MINI Analog Pro, MACX Analog, INTERFACE system gateways, and PLC logic device series.
Programming adapter - IFS-USB-PROG-ADAPTER - 2811271
Programming adapter with USB interface, for programming with software. The USB driver is included in the software
solutions for the products to be programmed, such as measuring transducers or motor managers.
Programming adapter - TWN4 MIFARE NFC USB ADAPTER - 2909681
Near Field Communication (NFC) programming adapter with USB interface for the wireless configuration of NFCcapable products from PHOENIX CONTACT with software. No separate USB driver is required.
Repeater power supplies
Repeater power supply - MINI MCR-2-RPSS-I-I-PT - 2902015
3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4)...20 mA, output
signal 0(4)...20 mA. The device can be used in both isolator and repeater power supply operation. push-in connection
technology
Repeater power supply - MINI MCR-2-RPSS-I-I - 2902014
3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4)...20 mA, output
signal 0(4)...20 mA. The device can be used in both isolator and repeater power supply operation. Screw connection
technology
04/16/2018 Page 13 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Repeater power supply - MINI MCR-2-RPSS-I-2I-PT - 2905629
4-way power supply doubler with plug-in connection technology. HART transparent, 0(4) ... 20 mA input signal,
0(4)...20 mA output signals. The device can be used in both isolator and repeater power supply mode on active as
well as passive analog input cards. Push-in connection technology.
Repeater power supply - MINI MCR-2-RPSS-I-2I - 2905628
4-way power supply doubler with plug-in connection technology. HART transparent, 0(4) ... 20 mA input signal,
0(4)...20 mA output signals. The device can be used in both isolator and repeater power supply mode on active as
well as passive analog input cards. Screw connection technology.
Signal conditioner
Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT - 2902028
Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for
the electrical isolation of analog signals. Configurable via DIP switch or software. Push-in connection technology,
standard configuration.
Signal conditioner - MINI MCR-2-UNI-UI-UIRO - 2902026
Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the
electrical isolation of analog signals. Configurable via DIP switch or software. Screw connection technology, standard
configuration.
Signal conditioner - MINI MCR-2-UNI-UI-UIRO-PT-C - 2902027
Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the
electrical isolation of analog signals. Configurable via DIP switch or software. Push-in connection technology, order
configuration.
04/16/2018 Page 14 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Signal conditioner - MINI MCR-2-UNI-UI-UIRO-C - 2902024
Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the
electrical isolation of analog signals. Configurable via DIP switch or software. Screw connection technology, order
configuration.
Signal conditioner - MINI MCR-2-UI-UI-PT - 2902040
3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover, for the
electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in connection
technology, standard configuration.
Signal conditioner - MINI MCR-2-UI-UI - 2902037
3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the
electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. Screw connection
technology, standard configuration.
Signal conditioner - MINI MCR-2-UI-UI-PT-C - 2902039
3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the
electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in connection
technology, order configuration.
Signal conditioner - MINI MCR-2-UI-UI-C - 2902036
3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the
electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. Screw connection
technology, order configuration.
04/16/2018 Page 15 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Signal conditioner - MINI MCR-2-U-UI-PT - 2902021
3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of analog signals in the
mV and V range, unipolar as well as bipolar. Push-in connection technology, standard configuration.
Signal conditioner - MINI MCR-2-U-UI - 2902019
3-way signal conditioner, with configurable input/output, for electrical isolation and conversion of analog signals in the
mV and V range, unipolar as well as bipolar. Screw connection technology, standard configuration.
Signal conditioner - MINI MCR-2-U-I0-PT - 2902023
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal:
0 ... 10 V, output signal: 0 ... 20 mA, push-in connection technology
Signal conditioner - MINI MCR-2-U-I0 - 2902022
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal:
0 ... 10 V, output signal: 0 ... 20 mA, screw connection technology
Signal conditioner - MINI MCR-2-U-I4-PT - 2902030
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal:
0 ... 10 V, output signal: 4 ... 20 mA, push-in connection technology
Signal conditioner - MINI MCR-2-U-I4 - 2902029
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal:
0 ... 10 V, output signal: 4 ... 20 mA, screw connection technology
04/16/2018 Page 16 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Signal conditioner - MINI MCR-2-I-I-PT - 2901999
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal:
0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA, push-in connection technology.
Signal conditioner - MINI MCR-2-I-I - 2901998
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal:
0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA, screw connection technology
Loop-powered isolators - MINI MCR-2-I-I-ILP-PT - 2901995
Single-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of
analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Push-in connection technology.
Loop-powered isolators - MINI MCR-2-I-I-ILP - 2901994
Single-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of
analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Screw connection technology.
Signal duplicator
Signal duplicator - MINI MCR-2-UNI-UI-2UI-PT - 2905028
Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and
duplication of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard
configuration.
04/16/2018 Page 17 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Signal duplicator - MINI MCR-2-UNI-UI-2UI - 2905026
Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and
duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, standard
configuration.
Signal duplicator - MINI MCR-2-UNI-UI-2UI-PT-C - 2905027
Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation
and duplication of analog signals. Configurable via DIP switch or software. Push-in connection technology, order
configuration.
Signal duplicator - MINI MCR-2-UNI-UI-2UI-C - 2905025
Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation
and duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, order
configuration.
System cable
Cable - FLK 16/EZ-DR/ 300/KONFEK - 2299330
Round cable set; connection 1: IDC/FLK socket strip (1x 16-position); connection 2: IDC/FLK socket strip (1x 16position); cable length: 3 m
Temperature transmitter
Resistance thermometer measuring transducer - MINI MCR-2-RTD-UI-PT - 2902052
Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor
resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. push-in connection
technology, standard configuration
04/16/2018 Page 18 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Resistance thermometer measuring transducer - MINI MCR-2-RTD-UI - 2902049
Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor
resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. Screw connection
technology, standard configuration
Resistance thermometer measuring transducer - MINI MCR-2-RTD-UI-PT-C - 2902051
Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor
resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. push-in connection
technology, order configuration
Resistance thermometer measuring transducer - MINI MCR-2-RTD-UI-C - 2902048
Configurable temperature transducer with plug-in connection technology for connecting 2, 3, and 4-conductor
resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. Screw connection
technology, order configuration
Thermocouple measuring transducer - MINI MCR-2-TC-UI-PT - 2905249
Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable
via DIP switch or software. Push-in connection technology, standard configuration
Thermocouple measuring transducer - MINI MCR-2-TC-UI - 2902055
Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable
via DIP switch or software. Screw connection technology, standard configuration
04/16/2018 Page 19 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
Thermocouple measuring transducer - MINI MCR-2-TC-UI-PT-C - 2905248
Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable
via DIP switch or software. Push-in connection technology, order configuration
Thermocouple measuring transducer - MINI MCR-2-TC-UI-C - 2902053
Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable
via DIP switch or software. Screw connection technology, order configuration
Terminal marking
Marker strip - SK 5,0 WH:REEL - 0805221
Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1,
THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, for
terminal block width: 5 mm, lettering field size: continuous x 5 mm
Threshold value switch
Limit value switches - MINI MCR-2-T-REL-PT - 2905633
Universally configurable temperature limit value switch with N/O relay output for the connection of 2, 3, and 4conductor resistance thermometers and thermocouples. Configurable via DIP switch or software. Push-in connection
technology
Limit value switches - MINI MCR-2-T-REL - 2905632
Universally configurable temperature limit value switch with N/O relay output for the connection of 2, 3, and 4conductor resistance thermometers and thermocouples. Configurable via DIP switch or software, screw connection
technology
04/16/2018 Page 20 / 21
https://www.phoenixcontact.com/gb/products/2901993
System adapter - MINI MCR-2-V8-FLK 16 - 2901993
Accessories
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - 2695439
DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rails according
to EN 60715
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
04/16/2018 Page 21 / 21
