https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input
signal: 0 ... 20 mA, output signal: 0 ... 10 V, push-in connection technology
Product Description
Standard signal 3-way signal conditioner with plug-in connection technology for the electrical isolation, conversion, amplification, and filtering of standard
signals. The measuring transducer supports fault monitoring and NFC communication.
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4046356651837
Weight per Piece (excluding packing)
97.400 g
Custom tariff number
85437090
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
6.2 mm
Height
109.81 mm
Depth
119.2 mm
Ambient conditions
06/28/2020 Page 1 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Technical data
Ambient conditions
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Degree of protection
IP20 (not assessed by UL)
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Input data
Number of inputs
1
Configurable/programmable
no
Current input signal
0 mA ... 20 mA
Input resistance current input
approx. 63 Ω (+ 0.7 V for test diode)
Output data
Number of outputs
1
Configurable/programmable
no
Voltage output signal
0 V ... 10 V
Max. output voltage
11 V
Short-circuit current
< 15 mA
Load/output load voltage output
≥ 10 kΩ
Ripple
< 20 mVPP (at 10 kΩ)
Power supply
Nominal supply voltage
24 V DC
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5ST-3,81 GN, Order No. 2869728) can be used to bridge the supply
voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Typical current consumption
25 mA (24 V DC)
54 mA (12 V DC)
Power consumption
≤ 200 mW (at 9.6 V DC)
Connection data
Connection method
Push-in connection
Stripping length
10 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
0.14 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 12 (flexible)
General
No. of channels
1
06/28/2020 Page 2 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Technical data
General
Maximum transmission error
0.1 % (of final value)
Maximum temperature coefficient
0.01 %/K
Temperature coefficient, typical
0.01 %/K
Limit frequency (3 dB)
approx. 30 Hz
Step response (10-90%)
approx. 10 ms
Protective circuit
Transient protection
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Overvoltage category
II
Degree of pollution
2
Rated insulation voltage
300 V (effective)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Color
gray
Housing material
PBT
Mounting position
any
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail according to EN 60715.
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
EMC data
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
Designation
Fast transients (burst)
Standards/regulations
EN 61000-4-4
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Standards/regulations
EN 61000-4-2
Designation
Electromagnetic RF field
Standards/regulations
EN 61000-4-3
EN 61000-4-4
06/28/2020 Page 3 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Technical data
Standards and Regulations
EN 61000-4-5
Designation
Conducted interferences
Standards/regulations
EN 61000-4-6
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Conformance/approvals
Designation
CE
Identification
CE-compliant
Designation
ATEX
Identification
II 3 G Ex ec ic IIC T4 Gc
Certificate
BVS 19 ATEX E 047 X
Designation
IECEx
Identification
Ex ec ic IIC T4 Gc
Certificate
IECEx BVS 19.0041X
Designation
UL, USA/Canada
Identification
UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
Designation
Shipbuilding approval
Identification
C, EMC2
Certificate
DNV GL 14445-15HH
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
06/28/2020 Page 4 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Pictogram
06/28/2020 Page 5 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Block diagram
06/28/2020 Page 6 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Pictogram
Classifications
eCl@ss
eCl@ss 4.0
27210100
eCl@ss 4.1
27210100
eCl@ss 5.0
27210100
eCl@ss 5.1
27210100
eCl@ss 6.0
27210100
eCl@ss 7.0
27210120
eCl@ss 8.0
27210120
eCl@ss 9.0
27210120
ETIM
ETIM 4.0
EC002653
ETIM 5.0
EC002653
ETIM 6.0
EC002653
ETIM 7.0
EC002653
UNSPSC
UNSPSC 6.01
30211502
UNSPSC 7.0901
39121004
UNSPSC 11
39121004
UNSPSC 12.01
39121004
UNSPSC 13.2
39121008
UNSPSC 18.0
39121008
06/28/2020 Page 7 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Classifications
UNSPSC
UNSPSC 19.0
39121008
UNSPSC 20.0
39121008
UNSPSC 21.0
39121008
Approvals
Approvals
Approvals
GL / UL Listed / cUL Listed / cULus Listed
Ex Approvals
ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed
Approval details
GL
https://approvalfinder.dnvgl.com/
14445-15 HH
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 238705
cULus Listed
Accessories
Accessories
Device marking
06/28/2020 Page 8 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Accessories
Marker for end clamp - UCT-EM (30X5) - 0801505
Marker for end clamp, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm, Number of individual
labels: 24
Marker for end clamp - UCT-EM (30X5) YE - 0830340
Marker for end clamp, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm, Number of individual
labels: 24
Plastic label - UC-EMLP (15X5) - 0819301
Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels:
10
Plastic label - UC-EMLP (15X5) YE - 0822615
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels:
10
Plastic label - UC-EMLP (15X5) SR - 0828095
Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm, Number of individual labels:
10
06/28/2020 Page 9 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Accessories
Plastic label - US-EMLP (15X5) - 0828790
Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm,
Number of individual labels: 189
Plastic label - US-EMLP (15X5) YE - 0828873
Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm,
Number of individual labels: 189
Plastic label - US-EMLP (15X5) SR - 0828874
Plastic label, Card, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm,
Number of individual labels: 189
DIN rail connector
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - 2695439
DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rails according to
EN 60715
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
06/28/2020 Page 10 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Accessories
Evaluation unit
Monitoring module - MINI MCR-2-FM-RC - 2904504
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM
system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology, standard
configuration
Monitoring module - MINI MCR-2-FM-RC-PT - 2904508
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM
system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology, standard
configuration
Labeled device marker
Marker for end clamp - UCT-EM (30X5) CUS - 0801589
Marker for end clamp, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 30 x 5 mm, Number of individual labels: 24
Marker for end clamp - UCT-EM (30X5) YE CUS - 0830348
Marker for end clamp, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 30 x 5 mm, Number of individual labels: 24
Plastic label - UC-EMLP (15X5) CUS - 0824550
Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
06/28/2020 Page 11 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Accessories
Plastic label - UC-EMLP (15X5) YE CUS - 0824551
Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label - UC-EMLP (15X5) SR CUS - 0828099
Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm, Number of individual labels: 10
Plastic label - US-EMLP (15X5) CUS - 0830076
Plastic label, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm, Number of individual labels: 189
Plastic label - US-EMLP (15X5) YE CUS - 0830077
Plastic label, can be ordered: By card, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm, Number of individual labels: 189
Plastic label - US-EMLP (15X5) SR CUS - 0830078
Plastic label, can be ordered: By card, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm, Number of individual labels: 189
Power module
06/28/2020 Page 12 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Accessories
Power terminal block - MINI MCR-2-PTB - 2902066
Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring
of the supply voltages in combination with the fault monitoring module. Screw connection technology
Power terminal block - MINI MCR-2-PTB-PT - 2902067
Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring
of the supply voltages in combination with the fault monitoring module. Push-in connection technology
Power supply
Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983
Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653
Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the
potentially explosive area
Terminal marking
Marker strip - SK 5,0 WH:REEL - 0805221
Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL,
THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for
terminal block width: 5 mm, lettering field size: continuous x 5 mm, Number of individual labels: 90000
06/28/2020 Page 13 / 14
https://www.phoenixcontact.com/us/products/2902001
Signal conditioner - MINI MCR-2-I0-U-PT - 2902001
Accessories
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
06/28/2020 Page 14 / 14
工商网监
湘ICP备2023018690号
