2902002

https://www.phoenixcontact.com/us/products/2902002 Signal conditioner - MINI MCR-2-I4-U - 2902002 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) 3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 4 ... 20 mA, output signal: 0 ... 10 V, screw connection technology The figure shows the MINI MCR-2-UI0-PT version Product description Standard signal 3-way signal conditioner with plug-in connection technology for the electrical isolation, conversion, amplification, and filtering of standard signals. The measuring transducer supports fault monitoring and NFC communication.         Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 103.4 GRM Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 110.5 mm Depth 120.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C 07/07/2015   Page 1 / 6 https://www.phoenixcontact.com/us/products/2902002 Signal conditioner - MINI MCR-2-I4-U - 2902002 Technical data Ambient conditions Degree of protection IP20 Input data Number of inputs 1 Configurable/programmable no Current input signal 4 mA ... 20 mA Input resistance current input approx. 63 Ω Output data Number of inputs 1 Configurable/programmable no Voltage output signal 0 V ... 10 V Max. output voltage 11 V Short-circuit current < 15 mA Load/output load voltage output ≥ 10 kΩ Power supply Nominal supply voltage 24 V DC Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Typical current consumption 25 mA (24 V DC) 54 mA (12 V DC) Power consumption ≤ 200 mW (at 9.6 V DC) Connection data Connection method Screw connection Single conductor/terminal point, solid, with ferrule, min. 0.2 mm² Single conductor/terminal point, solid, with ferrule, max. 1.5 mm² Single conductor/terminal point, solid, without ferrule, min. 0.2 mm² Single conductor/terminal point, solid, without ferrule, max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 12 Stripping length 10 mm Screw thread M3 General Maximum transmission error 0.1 % (of final value) Maximum temperature coefficient 0.01 %/K 07/07/2015   Page 2 / 6 https://www.phoenixcontact.com/us/products/2902002 Signal conditioner - MINI MCR-2-I4-U - 2902002 Technical data General Limit frequency (3 dB) approx. 30 Hz Step response (10-90%) approx. 10 ms Protective circuit Transient protection Electrical isolation Reinforced insulation in accordance with IEC 61010-1 Surge voltage category II Pollution degree 2 Rated insulation voltage 300 V Test voltage, input/output/supply 3 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color gray Housing material PBT Mounting position any Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Listed Class I, Div. 2, Groups A, B, C, D T6 Class I, Zone 2, Group IIC T6 EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Designation Conducted interferences Standards/regulations EN 61000-4-6 Classifications eCl@ss eCl@ss 4.0 27040702 eCl@ss 4.1 27040702 eCl@ss 5.0 27242213 eCl@ss 5.1 27049002 07/07/2015   Page 3 / 6 https://www.phoenixcontact.com/us/products/2902002 Signal conditioner - MINI MCR-2-I4-U - 2902002 Classifications eCl@ss eCl@ss 6.0 27049002 eCl@ss 7.0 27049002 eCl@ss 8.0 27210120 ETIM ETIM 3.0 EC001039 ETIM 4.0 EC002540 ETIM 5.0 EC002653 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / GL / cULus Listed Ex Approvals ATEX / UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Listed  07/07/2015   Page 4 / 6 https://www.phoenixcontact.com/us/products/2902002 Signal conditioner - MINI MCR-2-I4-U - 2902002 Approvals cUL Listed  EAC  GL  cULus Listed  Drawings Pictogram Block diagram Sensor / Field OUT IN TI– + 1 OUT 1 I+ US PLC / DCS 5 + OUT U+ IN I+ 5 4-wire OUT 2 I- – 2 + 3 – 4 OUT U– IN I– PWR+ PWR+ PWR– 6 – 6 7 + PWR– 8 – PWR– PWR+ FM Zone 2 Pictogram IN I U FM POWER Pictogram OUT IN U I OUT FM POWER 07/07/2015   Page 5 / 6 https://www.phoenixcontact.com/us/products/2902002 Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 07/07/2015   Page 6 / 6